Edimax EW-7104PC Manuel utilisateur

Quick Guide

WLAN PCMCIA Card

Quick Start to Wireless Networking

1. Install WLAN PCMCIA Card driver for Windows 98, ME, 2000, and NT

1. Select Run from the Start menu. Type “E:\WLAN PCMCIA Card\Utility\Setup.exe” in the

Open box (where is your CD-ROM drive) and click OK.

2. Follow the installation wizard to setup step by step.

3. The next screen will tell you the directory into which the utility will be installed.Accept the

default directory or if you wish, enter an alternate location, then click Next to proceed.

5. Once the installation is

complete, a dialog box will

appear asking if you want

to restart the computer.

Click OK to accept.

4. The Select Folder dialog

box allows you to accept

the default application

program folder name or to

assign a name of your

preference.

6. When the installation is done, restart the computer.

7. After the restart, insert the WLAN PCMCIA Card into any free PCMCIA port on your

Notebook.

8. Windows will automatically detect the WLAN PCMCIA Card as a new device and display

the Add New Hardware Wizard dialog box. Click Next to continue.

9. Follow the installation wizard to setup step by step.

10. Once your system has restarted, in Control Panel, double-click the System icon, click the

Device Manager tab. Operation System will detect new device.

11. After completing the Utility installation process, check the toolbar at the bottom of the

screen. There is a small icon to indicate the connection status. Red color means no

connection and blue color means connected.

! Caution: Do not insert WLAN PCMCIA Card into the computer until the installation is

finished.

2. Install WLAN PCMCIA Card driver for Windows XP

1. Insert the CD ROM and the WALN PCMCIA Card and then a diagram will show up to

indicate that a new hardware is found by Windows XP. Click on the “ Install the software

automatically [Recommended]” for next step.

2. The WLAN PCMCIA Card will find its path directly from the CD ROM as shown in below.

(The path for Windows XP is E:\WLAN PCMCIA Card\Drivers\winXP, where is from the

CD-ROM)

3. The last diagram shown as below indicates all the driver installation is done.

Autres manuels Edimax Carte réseau

Edimax

Edimax EW-7106PC Manuel utilisateur

Edimax

Edimax EW-7612PIn V2 Manuel utilisateur

Edimax

Edimax EW-7722UTn V2 Manuel utilisateur

Edimax

Edimax EW-7612PIn V2 Manuel utilisateur

Edimax

Edimax LAN USB Adapter Manuel utilisateur

Edimax

Edimax USB VoIP Gateway Box None Manuel utilisateur

Edimax

Edimax Wireless LAN USB Adapter Manuel utilisateur

Edimax

Edimax EW-7306Pg Manuel utilisateur

Edimax

Edimax EN-9235TX-32 Manuel utilisateur

Edimax

Edimax HP-5102 Manuel utilisateur

Edimax

Edimax WAP1200 Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

TRENDnet

TRENDnet TU2-ETG Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

National Instruments

National Instruments NI 9234 Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur