EdilKamin MITO IDRO Guide de démarrage rapide

MITO IDRO

EN Installation, use and maintenance page 2

PELLET BOILER STOVE

ENGLISH

Safety Information 4

General information 5

Installation 11

Covering Installation 15

Instructions for use 19

Maintenance 24

Possible troubleshooting 26

The undersigned EDILKAMIN S.p.a. with head office he-

adquarters at Via Vincenzo Monti 47 - 20123 Milan - Italy - VAT

IT00192220192

Declares under its own responsability as follows:

The pellet Boiler-stoves illustrated below conforms to Regu-

lation EU 305/2011 (CPR) and to the harmonised European

Standard

EN 14785:2006

WOOD PELLET BOILER-STOVES, trademark EDILKAMIN,

called MITO IDRO

Year of manufacture: Ref. Data nameplate

Declaration of performance (DoP - EK n° 129):

Ref. data tag plate

In addition, it is hereby declared that:

The wood pellet Boiler-stoves

MITO IDRO is in compliance

with the requirements of the European directives:

2014/35/CE - Low voltage directive

2014/30/CE - Electromagnetic compatibility directive

EDILKAMIN S.p.a. will decline all responsability of malfun-

ctioning or damage to the equipment in case of unauthori-

zed

substitution, assembly or modifications of any sort on the

said equipment on the part of non-EDILKAMIN personnel.

CONTENTS

ENGLISH

Dear Sir/Madam

We thank you for and congratulate you on choosing our

product. Before using it, we ask you to read this manual

carefully, in order for you to be able to make the most of all

its functions in total safety.

This manual is an integral part of the product. We ask you

to keep it for the entire lifetime of the product. If you lose it,

you can request a copy from your dealer or download it from

www.edilkamin.com

Readers of this manual

This manual is addressed to:

• those who will use the product at home (“USER”);

• the technician who will install the product (“INSTALLER”)

The target person of each page is indicated in a band at the

bottom of the page (USER or INSTALLER).

General information

After unpacking the product, check the condition and

completeness of the contents.

In the event of error, immediately contact the retailer where

the purchase was made, providing them with a copy of the

warranty booklet and the sales receipt.

The appliance must be installed and operated in compliance

with local and national law and European regulations. For the

installation, and for anything not specifically indicated in the

manual, observe local regulations.

The diagrams provided in this manual are for illustration

purposes only: they do not always strictly refer to your

specific model, and are not binding in any way.

MEANING OF SYMBOLS

In some parts of the manual the following symbols are

used:

INFORMATION:

failure to comply with these requirements

will compromise product use.

PLEASE NOTE:

carefully read and understand the

message in question, since failure to

follow the instructions in it could cause

serious damage to the product and put

the safety of those using it at risk.

OPERATING SEQUENCE:

follow the instructions for the operations

described.

Identification of the product and warranty.

The product is uniquely identified by a number, the

“counterfoil”, which is indicated on the warranty certificate.

Please keep:

• the warranty certificate accompanying the product

• the purchase receipt given to you by the retailer

• the declaration of conformity given to you by the installer.

The warranty conditions are given in the warranty certificate

accompanying the product.

First ignition (commissioning), in Italy, by an

authorised technician is required by UNI 10683, and is

recommended in all countries to ensure best results from

the product.

This consists of:

• checking the installation documents (declaration of

conformity) and the quality of the installation itself

• calibrating the product to suit its actual application

• providing explanations to the end user and issuing

the complementary documentation (first ignition -

commissioning certificate)

Having the appliance commissioned properly ensures that it

will operate to best effect and in complete safety.

Commissioning is required for activation of the Edilkamin

manufacturer warranty. The warranty is only valid in the

country where the product was bought.

If the appliance is not commissioned by an authorised

technician, Edilkamin will not provide warranty service. See

the warranty booklet for details. The above terms do not

affect the dealer's legal responsibility for the legal warranty.

The warranty, however, covers only demonstrable

manufacturing defects and not, for instance, problems

resulting from improper installation or calibration.

ENGLISH

SAFETY INFORMATION

• The product is not designed for use by

people, including children, with limited

physical, sensory and mental abilities.

• The appliance is not designed for

cooking purposes.

• The appliance is designed to burn

wood pellets from category A1 in the

UNI EN ISO 17225-2 standard, in the

amounts and manner described in this

manual.

• The appliance is designed for indoor

use and in areas with normal humidity

conditions.

• Keep the product in a dry place out of

the weather.

• For the legal and company warranties,

refer to the warranty certificate inside

the product: specifically, neither

Edilkamin nor the retailer are liable

for damage resulting from incorrect

installation or maintenance.

Safety risks may be caused by:

• installation in non-suitable settings,

in particular those that are subject

to fire risks. DO NOT INSTALL THE

PRODUCT IN AREAS SUBJECT TO

THE RISK OF FIRE.

• contact with fire and hot parts (e.g.

glass panel and pipes). DO NOT

TOUCH HOT PARTS and, when the

stove is switched off and still hot,

always wear the glove supplied.

• contact with live electrical equipment

(internal). DO NOT ACCESS THE

INTERNAL ELECTRICAL EQUIPMENT

WHILE THE APPLIANCE IS POWERED

ON. Electrocution hazard.

• use of improper ignition aids (e.g.

alcohol). DO NOT IGNITE OR BOOST

THE FLAME WITH FLUID SPRAYS

OR A FLAME TORCH. Serious risk of

burns, damage and injury.

• use of fuel other than wood pellets. DO

NOT BURN WASTE MATTER, PLASTIC

OR OTHER MATERIALS THAN WOOD

PELLETS IN THE COMBUSTION

CHAMBER. The product may become

soiled, the flue may catch fire, and

environmental damage may ensue.

• cleaning the combustion chamber

when hot. DO NOT CLEAN THE

HEARTH WITH A VACUUM CLEANER

WHILE IT IS HOT. You could damage

the vacuum-cleaner and risk the

emission of smoke in the room.

• cleaning the smoke duct with

cleaning products. DO NOT CLEAN

THE PRODUCT WITH FLAMMABLE

PRODUCTS. Risk of fire or blowback.

• cleaning the glass pane while hot or

with unsuitable cleaning products.

DO NOT CLEAN HOT GLASS WITH

WATER. ONLY USE RECOMMENDED

GLASS CLEANING PRODUCTS. Risk

of cracking and permanent, irreparable

damage to the glass.

• the storage of flammable materials

at a distance which is less than the

safe distances listed in this manual.

DO NOT PLACE LAUNDRY ON

THE APPLIANCE. DO NOT PLACE

DRYING RACKS WITHIN THE SAFETY

CLEARANCE. Keep flammable fluids

away from the appliance. Fire hazard.

• blocking the aeration vents and air

intakes in the room. DO NOT BLOCK

THE AERATION VENTS OR FLUE. Risk

of smoke returning into the room with

consequent damage and injury.

• use of the product as a support or

ladder. DO NOT CLIMB ONTO THE

PRODUCT OR USE IT AS A SUPPORT.

Risk of damage and injury.

• use of the stove with the combustion

chamber open. DO NOT USE THE

PRODUCT WITH ITS DOOR OPEN.

• incandescent material projected

from the open door. DO NOT throw

incandescent material outside the

appliance. Fire hazard.

• use of water in case of fire. CALL THE

AUTHORITIES if a fire breaks out.

• never operate the product without

water in the circuit.

• running it dry can damage it.

If you have doubts, please do not take

any action, but contact the retailer or the

installer.

For reasons of safety, read the user

instructions included in this manual.

ENGLISH

maschio 1/2"

Ø 8 cm

uscita fumi

Ø 4 cm aria

combustione

110

18,5

1,5

879,5

maschio 3/4"

maschio 1/2"

Ø 8 cm

uscita fumi

Ø 4 cm aria

combustione

110

18,5

1,5

879,5

maschio 3/4"

maschio 1/2"

Ø 8 cm

uscita fumi

Ø 4 cm aria

combustione

110

18,5

1,5

879,5

maschio 3/4"

maschio 1/2"

Ø 8 cm

uscita fumi

Ø 4 cm aria

combustione

110

18,5

1,5

879,5

maschio 3/4"

Combustion air

Ø 40 mm

Smoke outlet Ø

80 mm

3/4” male

1/2” male

inlet

outlet

DIMENSIONS

MITO IDRO dimensions (cm)

ENGLISH

ELECTRICAL CHARACTERISTICS

Power supply 230Vac +/- 10% 50 Hz

Average power consumption 120 W

Power consumption during ignition 400 W

Protection on electronic circuit board T2A, 250 Vac, 5x20 Fuse

TECHNICAL DATA FOR SIZING THE FLUE

which must in any case satisfy the requirements of this sheet and the installation instructions for the product

Nominal power Reduced power

Thermal power output 13 3,9 kW

Temperature of fumes on exit from the discharge

pipe 155 67 °C

Minimum draught 0 - 5 Pa

Fume flow capacity 10,6 3,6 g/s

TECHNICAL DATA as per EN 14785

Nominal power Reduced power

Thermal power output 13 3,9 kW

Thermal power transferred to the water without fan 10 3 kW

Thermal power transferred to the environment 3 0,9 kW

Yield / Efficiency 91,6 97,6 %

Emissions CO 13% O20,010 0,025 %

Fume temperature 129 56 °C

Fuel consumption 3 0,8 kg/h

Draught 12 - 5 10 - 3 Pa

Hopper capacity 30 kg

Water content 12 Litres

Maximum operating pressure of the water 1,5 bar

Maximum operating temperature of the water 90 °C

Autonomy 9 34 hours

Heatable volume * 340 m3

Smoke outlet pipe diameter (male) 80 mm

Air intake pipe diameter (male) 40 mm

Weight including packaging (ceramic/steel) 250 / 230 kg

* The heatable room dimensions are calculated on the basis of home insulation in compliance with Italian law 10/91,

and subsequent changes together with an expected heat output of 33 Kcal/m³ per hour.

TECHNICAL DATA

The above data is for guidance only and was measured during certification by a notified

body.

EDILKAMIN s.p.a. reserves the right to modify the product without notification in the

interests of improvement.

ENGLISH

DISIMBALLO

PREPARAZIONE E DISIMBALLO

I materiali che compongono l’imballo non sono né

tossici né nocivi, pertanto non richiedono particolari

processi di smaltimento.

Lo stoccaggio, lo smaltimento o eventualmente il

riciclaggio è a cura dell’utilizzatore finale in conformità

delle vigenti leggi in materia.

IMBALLO

L’imballo contiene due colli:

- uno (1)con la struttura della stufa;

- uno (2) con le ceramiche

Di seguito la descrizione per la versione in ceramica e

per la versione in acciaio

Si raccomanda di effettuare ogni

movimentazione in posizione verticale con

mezzi idonei prestando attenzione alle

norme vigenti in materia di sicurezza.

Non rovesciare l’imballo e usare ogni

cautela per i particolari da montare.

versione in ceramica versione in acciaio

DISIMBALLO

Per rimuovere il prodotto dal bancale:

• smontare il frontalino inferiore;

• svitare le viti di fissaggio al bancale

• riposizionare il frontalino

Il materiale dell’imballo (per esempio plastiche, fogli a

pellicola) può essere pericoloso per i bambini.

C’è rischio di soffocamento. Tenere gli imballaggi

lontano dai bambini.

ENGLISH

1) CERAMIC VERSION

Fig. 1

The stove is delivered (Fig. 1) with the following external

components already installed:

• aluminium profiles (A)

• upper grille (B)

• lower panel (C)

The pieces indicated below are packaged separately.

• 6 side ceramic panels (D)

• 1 lower horizontal ceramic element (E)

• 1 upper horizontal ceramic element (F)

• 1 ceramic top (G)

• 4 milled pins M4

• 4 washers

• 4 rubber stoppers (M)

• 4 flat washers D 10

• 4 brass washers D 8

To fit proceed as follows:

Fig. 2

Remove the upper grille together with the frame (B)

screwed onto the structure and the interlocking lower

panel (C), after removing the fixing screw.

Fig. 3

Attach the lower horizontal ceramic element (E) using

the relevant slots, M4 knurled bolts and washers provi-

ded.

fig. 1

fig. 3

fig. 2

fixing screw

detail of upper

grille attachment to

the structure

COVERING INSTALLATION

ENGLISH

Fig. 4

Attach the upper horizontal ceramic element (F) to the

upper grille (B) using the two M4 knurled bolts and wa-

shers provided.

Fig. 5

Insert the side ceramic panels (D) into the relevant

guides.

N.B.

In the event of vibration, an 8x1 adhesive gasket is

provided

to place between the profi les and ceramic side panels.

Fig. 6

Place the ceramic top (G) above the structure.

NB: it the ceramic top does not fit evenly

over the structure, use the rubber stoppers

(M) and washers provided, inserting them

into the housings on the cast iron top.

fig. 6

fig. 5

fig. 4

REAR VIEW

COVERING INSTALLATION

ENGLISH

fig. 1

2) STEEL VERSION

Fig. 1

The stove is delivered (Fig. 1) with the following external

components already installed:

• metal sides (A)

• upper grille (B)

• lower panel (C)

The pieces indicated below are packaged separately.

• 1 lower horizontal ceramic element (E)

• 1 upper horizontal ceramic element (F)

• 1 ceramic top (G)

• 4 milled pins M4

• 4 washers

• 4 rubber stoppers (M)

• 4 flat washers D 10

• 4 brass washers D 8

To fit proceed as follows:

Fig. 2

Slide out the metal sides upwards to remove the upper

grille together with the frame (B) screwed onto the struc-

ture and the interlocking lower panel (C),

After removing the fixing screw. Re-position the pre-

viously removed metal sides.

Fig. 3

Attach the lower horizontal ceramic element (E) using

the relevant slots, M4 knurled bolts and washers provi-

ded.

fig. 3

fig. 2

fixing screw

detail of upper

grille attachment to

the structure

COVERING INSTALLATION

Autres manuels pour MITO IDRO

Autres manuels EdilKamin Poêle

EdilKamin

EdilKamin BIG Guide de démarrage rapide

EdilKamin

EdilKamin Celia Air Tight Plus Guide de démarrage rapide

EdilKamin

EdilKamin Alpen Guide de démarrage rapide

EdilKamin

EdilKamin Blade2 12 Up Guide de démarrage rapide

EdilKamin

EdilKamin NANCY Guide de démarrage rapide

EdilKamin

EdilKamin BLADE2 H 18 UP Guide de démarrage rapide

EdilKamin

EdilKamin Simpaty Series Guide de démarrage rapide

EdilKamin

EdilKamin ITALIANA CAMINI CLASSICA Guide de démarrage rapide

EdilKamin

EdilKamin Vyda2 Air Tight Instructions d'installation et d'utilisation

EdilKamin

EdilKamin STATUS PLUS Guide de démarrage rapide

EdilKamin

EdilKamin BLADE H 15 Guide de démarrage rapide

EdilKamin

EdilKamin FANTASY Guide de démarrage rapide

EdilKamin

EdilKamin DAISY Guide de démarrage rapide

EdilKamin

EdilKamin MYA Air Tight Guide de démarrage rapide

EdilKamin

EdilKamin CELIA Air Tight Guide de démarrage rapide

EdilKamin

EdilKamin CHERIE UP Guide de démarrage rapide

EdilKamin

EdilKamin SALLY Guide de démarrage rapide

EdilKamin

EdilKamin Stylo ELLE Guide de démarrage rapide

EdilKamin

EdilKamin Italiana Camini DAFNE Guide de démarrage rapide

EdilKamin

EdilKamin BIJOUX Guide de démarrage rapide

EdilKamin

EdilKamin Iris Plus Manuel utilisateur

EdilKamin

EdilKamin IDROPELLBOX Guide de démarrage rapide

EdilKamin

EdilKamin CUBIRA 12 Guide de démarrage rapide

EdilKamin

EdilKamin Melody MIMI Guide de démarrage rapide

Manuels Poêle populaires d'autres marques

Arada

Arada Cassette Stove Manuel utilisateur

Parmco

Parmco FS 600 Manuel utilisateur

MCZ

MCZ SUITE AIR 10 M2 Manuel utilisateur

HearthStone

HearthStone Stowe DV 8321 Guide de dépannage

Cattara

Cattara FAMILY Manuel utilisateur

Stanley

Stanley Argon F500 OVAL Manuel utilisateur

Avalon

Avalon B-VENT Manuel utilisateur

Nordpeis

Nordpeis Vega Manuel utilisateur

Exquisit

Exquisit EKC601-5 Manuel d'utilisation

Stanley

Stanley Oisin Oil MK II Manuel du propriétaire

Thermocet

Thermocet Brookfield S/CC Manuel utilisateur

HASE

HASE delhi Manuel utilisateur

Vermont Castings

Vermont Castings Intrepid 2 Manuel utilisateur

Italiana Camini

Italiana Camini CLASSICA Guide de démarrage rapide

Avalon

Avalon Vashon Avanti DVS FS Manuel utilisateur

Spartherm

Spartherm ambiente a1 Manuel utilisateur

Dimplex

Dimplex MCFSTV12AU Manuel utilisateur

Warmlite

Warmlite WL46040 Manuel utilisateur