Capture Mode
In this menu you can set a timed delay for image capture of 2, 5 or 10 seconds.
Resolution
The highest resolution available is 12 megapixels but you can reduce the quality to
save on storage space if necessary. The other options available are 10MP, 5MP, 3MP,
2MP, 1.3MP and VGA (640x480).
Sequence
Turning on this option will put the camera into burst mode where each press of the OK
button will take 3 pictures in succession.
Quality
This adjusts the picture quality. Changing this setting can save on SD card space.
Sharpness
This will change the sharpness of the image. Changing this setting will not affect the
amount of space taken up by each picture.
White Balance
It is recommended to leave this setting ON. However 4 modes are available for
tailoring the lens to specic conditions. They are as follows: Daylight, Cloudy,
Tungsten and Fluorescent.
Color
Using this setting you are able to take pictures in Color, Black & White or Sepia.
ISO
It is recommended to leave this setting on AUTO but 3 other options are available
should you wish to change the sensitivity to light. They are 100, 200 & 400.
Exposure
This can be used in combination with ISO to achieve certain results in different
conditions.
Anti-Shaking
This will turn on or off the built-in stability function (recommended to leave set to ON).
Quick Review
OFF, 2 seconds, 5 seconds. This changes the length of time that an image is displayed
on screen for review after a picture has been taken.
Date Stamp
Turning this ON will place a date stamp on all images taken.
DC-27-G
Dash Camera with 2.7” Display & GPS
