Ebyte E18 Series Manuel utilisateur

E18 series ZigBee wireless module

Firmware Update Operation Instructions

Chengdu Ebyte Electronic Technology Co,;Ltd

AN2022001

Step 1 Hardware preparation .................................................................................. 3

Step 2 Install tools and drivers .................................................................................. 3

Step 3 Connect debugger/programmer to target module/test kit ........................................................3

Step 4 Connect USB cable .................................................................................... 4

Step 5 Associate a USB device with a USB driver .................................................................. 4

Step 6 Check LED status ...................................................................................... 4

Step 7 Flash firmware .........................................................................................5

Revision history ............................................................................................. 6

Chengdu Ebyte Electronic Technology Co,;Ltd

AN2022001

Step 1 Hardware preparation

Prepare the following items：

Debugger/Programmer CC Debugger https://www.ebyte.com/en/product-view-news.html?id=947

Ebyte E18 seires module or E18 series test kits https://www.cdebyte.com/product_serch/E18-/1/

Step 2 Install tools and drivers

To obtain the USB drivers required by the tools, it is recommended to download and install the tools listed below:

SmartRF™ Flash Programmer https://www.ti.com/tool/FLASH-PROGRAMMER

After the tool is installed, the driver will be stored in the following default path:

C:\Program Files\Texas Instruments\SmartRF Tools\Drivers\cebal

Step 3 Connect debugger/programmer to target module/test kit

Connect debugger/programmer to target module/test kit，The minimum connections required for SOC debugging and

programming are shown in the below:

CC Debugger

connecting

E18 modules/test kit

GND

Target Voltage Sense

VCC

DC(Debug Clock)

P2.2

DD(Debug Data)

P2.1

RESETn

RESET

For the pin definitions of E18 series modules/test kits, please refer to the relevant product manuals.

Chengdu Ebyte Electronic Technology Co,;Ltd

AN2022001

Step 4 Connect USB cable

Connect the USB cable to the debugger and then to the PC.

Step 5 Associate a USB device with a USB driver

When the debugger/programmer is connected to the PC, the PC will detect the new USB device. Windows will automatically handle the

installation and association of the relevant drivers.

If Windows does not automatically recognize the device driver, please disconnect the target module/test kit and reconnect the USB cable to try.

Or install the driver manually, the driver path：

C:\Program Files\Texas Instruments\SmartRF Tools\Drivers\cebal

Step 6 Check LED status

The debugger/programmer is respectively connected to the target module/test kit and PC, and it supplies power to the target module/test kit.

Then check the status of the LEDs on the Debugger/programmer.

If the light is Green, the debugger/programmer has successfully detected the chip on the target.

If the light is Red, the debugger/programmer failed to detect the chip on the target.

Please ensure that all required wires are properly connected and the target board is powered. Or please press the reset button of the

debugger/programmer to retry the chip detection.

Chengdu Ebyte Electronic Technology Co,;Ltd

AN2022001

Step 7 Flash firmware

Opent SmartRF™ Flash Programmer：

○

1Select “Program CCxxxx SoC or MSP430”；

○

2 Displays the successfully recognized SoC chip, it can be considered that the connection is successful;

○

3Select the firmware file "*.Hex" file;

○

4It is recommended to select “Erase,program and verify”；

○

5 Click“Perform action”, start to flash the firmware and waiting for the progress bar is to complete.

○

Chengdu Ebyte Electronic Technology Co,;Ltd

AN2022001

Revision history

Version

Date

Description

Issued by

1.0

2022-9-1

Initial version

Ning

About us

Technical support: support@cdebyte.com

Documents and RF Setting download link: https://www.ru-ebyte.com

Thank you for using Ebyte products! Please contact us with any questions or suggestions: in[email protected]

------------------------------------------------------------------------------------------------------------

Fax: 028-61543675 ext. 821

Web: https://www.ru-ebyte.com

Address: Innovation Center D347, 4# XI-XIN Road,Chengdu, Sichuan, China

Autres manuels pour E18 Series

Table des matières

Autres manuels Ebyte Module sans fil

Ebyte

Ebyte E104-BT12NSP-TB Manuel utilisateur

Ebyte

Ebyte E22-900T22S1C Manuel utilisateur

Ebyte

Ebyte ESP32-C3-MINI-1U Manuel utilisateur

Ebyte

Ebyte E30-400M20S Manuel utilisateur

Ebyte

Ebyte CC2541 Manuel utilisateur

Ebyte

Ebyte E220-400MM22S Manuel utilisateur

Ebyte

Ebyte E62 Series Manuel utilisateur

Ebyte

Ebyte E30-780T20S Manuel utilisateur

Ebyte

Ebyte E10-433MD-SMA Manuel utilisateur

Ebyte

Ebyte E32-433T33D Manuel utilisateur

Ebyte

Ebyte EO01C-MLO1S Manuel utilisateur

Ebyte

Ebyte E22-900T30DC Manuel utilisateur

Ebyte

Ebyte E49-400T30D Manuel utilisateur

Ebyte

Ebyte E70-433NW14S Manuel utilisateur

Ebyte

Ebyte E32 Series Manuel utilisateur

Ebyte

Ebyte E01C-ML01DP5 Manuel utilisateur

Ebyte

Ebyte E70-900T14S Manuel utilisateur

Ebyte

Ebyte E70-400M14S1B Manuel utilisateur

Ebyte

Ebyte E49-900T20S Manuel utilisateur

Ebyte

Ebyte E70-900T30S Manuel utilisateur

Ebyte

Ebyte E72-2G4M02S2B Manuel utilisateur

Ebyte

Ebyte E73-2G4M04S1B Manuel utilisateur

Ebyte

Ebyte E180-ZG120B Manuel utilisateur

Ebyte

Ebyte E01-2G4M27SX Manuel utilisateur

Manuels Module sans fil populaires d'autres marques

Laird

Laird RM024 Manuel utilisateur

Laird

Laird BT830-SA Guide de configuration rapide

Fibocom

Fibocom FM101-NA-20 Instructions d'installation

Waldmann

Waldmann EnOcean TALK MODUL G2 Manuel utilisateur

Smartech

Smartech LBT-1.DO4 Manuel utilisateur

Cooper Wiring Devices

Cooper Wiring Devices ESPIRE RF RFAPM Manuel utilisateur

Yuga

Yuga CLM920 Manuel utilisateur

Waldmann

Waldmann TALK Bluetooth Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions UC864-G Manuel d'installation

Quectel

Quectel SC690A Series Supplément

Panasonic

Panasonic INDUSTRY PAN9028 Guide de configuration rapide

LongSung Technology

LongSung Technology U9507E Manuel utilisateur

Wistron NeWeb

Wistron NeWeb DNUR-S2 Manuel utilisateur

RF-Star

RF-Star SimpleLink RF-BM-2652P1 CC2652P Manuel utilisateur

CHIEF

CHIEF AVMW Manuel utilisateur

Huawei

Huawei EM701 Manuel utilisateur

SIYI

SIYI FTM30 Manuel utilisateur

RF-Star

RF-Star RF-BM-4055B1L Mode d’emploi