Eaton Powerware 5115A USB Manuel utilisateur

POWERWARE®5115A USB

User’s Guide

500-1400 VA

www.powerware.com.au

5115AUSBManual.qxd Rev 1

Powerware is a registered trademark and Advanced Battery Management (ABM) is a trademark of Powerware Corporation.

Where the brand name “Powerware” is used,

the term refers to Eaton’s Powerware Division, trading in Australia

as Eaton Power Quality Pty Ltd

POWERWARE®5115A USB

500-1400 VA

User’s Guide

www.powerware.com.au

Special Symbols

The following are examples of symbols used on the UPS to alert you to important information.

CAUTION To reduce the risk of electric shock,

Do not remove cover (or back)

No user-serviceable parts inside

Refer servicing to the factory

CAUTION

Risk of Electric Shock

Do Not Open Cover

RISK OF ELECTRIC SHOCK - Indicates that a risk of electric shock is

present and the associated warning should be observed.

CAUTION: REFER TO OPERATOR’S MANUAL - Refer to your operator’s

manual for additional information, such as important operating and

maintenance instructions.

SAFETY EARTHING TERMINAL - Indicates the primary safety ground.

LOAD ON/OFF - Press the button with this symbol to energise the output

receptacles ( indicator illuminates) or to de-energise the output

receptacles ( is off).

RJ-45 RECEPTACLE - This receptacle provides network interface

connections. Do not plug telephone or telecommunications equipment into this

receptacle.

This symbol indicates that you should not discard the UPS or the UPS

batteries in the trash. The UPS may contain sealed, lead-acid batteries.

Batteries must be recycled.

TABLE OF CONTENTS

1 Powerware 5115 -Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Inspecting the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Installing the UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

UPS Rear Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Turning the UPS On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Starting the UPS on Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Turning the UPS Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Standby Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

UPS Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Initiating the Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

4 Additional UPS Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Communication Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Network Transient Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

5 UPS Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

UPS and Battery Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Storing the UPS and Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Replacing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Testing New Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Recycling the Used Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

6 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

7 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Audible Alarms and UPS Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Silencing an Audible Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

8 Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Powerware®5115A USB User’s Guide • www.powerware.com.au

Figure 1. Powerware 5115

CHAPTER 1

POWERWARE 5115 - INTRODUCTION

The Powerware 5115 uninterruptible power system (UPS) protects your sensitive

electronic equipment from power problems such as power failures, power sags, power

surges, brownouts, and line noise.

Power failure can occur when you least expect it and power quality can be erratic.

Power problems have the potential to corrupt critical data, destroy unsaved work

sessions and damage hardware - causing hours of lost productivity and expensive

repairs.

With the Powerware 5115, you can safely eliminate the effects of power disturbances

and guard the integrity of your equipment. The Powerware 5115’s flexibility to handle an

array of network devices makes it the perfect choice to protect your LANs, servers,

workstations and other electrical equipment.

2Powerware®5115A USB User’s Guide • www.powerware.com.au

Powerware 5115 - Introduction

Because an integral part of power protection is power management software, the

Powerware 5115 comes fully equipped with a communication port, USB port, serial

cable and a CD containing both LanSafe III for networked systems and FailSafe III for

standalone systems.

Providing outstanding performance and reliability, the Powerware 5115’s unique benefits

include the following:

• Advanced Battery Management (ABM ™) doubles battery service life, optimises

recharge time and provides advanced warning before the end of battery life.

• Buck and Boost voltage regulation ensures consistent voltage to your load by

correcting voltage fluctuations.

• Hot-swappable batteries simplify maintenance by allowing you to replace

batteries safely without powering down the critical load.

• Network Transient Protector guards your modem, fax machine and other network

communications equipment from surges.

• Start-on-battery capability allows you to power up the UPS even if utility power

is not available.

• The Powerware 5115 is backed by worldwide agency approvals.

Powerware®5115A USB User’s Guide • www.powerware.com.au

CHAPTER 2

INSTALLATION

This section explains

• Equipment inspection

• Safety precautions

• UPS Installation

• UPS rear panels

Inspecting the Equipment

If the UPS has been damaged during shipment, contact your vendor immediately.

Safety Precautions

Read the following precautions before you install the UPS.

SAVE THESE INSTRUCTIONS.

This manual contains important instructions that you should follow during installation and

maintenance of the UPS and batteries. Please read all instructions before operating the

equipment and save this manual for future reference.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

• This UPS contains its own energy source (batteries). The output receptacles

may carry live voltage even when the UPS is not connected to an AC supply.

• Do not remove or unplug the input cord when the UPS is turned on. This

removes the safety ground from the UPS and the equipment connected to the

UPS.

• To reduce the risk of fire or electric shock, install this UPS in a temperature and

humidity controlled, indoor environment, free of conductive contaminants.

Ambient temperature must not exceed 40oC. Do not operate near water or

excessive humidity (95% max).

• To comply with international standards, the sum of earth leakage current from

the load connected to the UPS must not exceed 1.5 mA.

4Powerware®5115A USB User’s Guide • www.powerware.com.au

Installation

Installing the UPS

The following steps explain how to install the UPS. Figure 2 shows a typical installation

only. See “UPS Rear Panels” on page 6 for the rear panel of each model.

1. If you are installing power management software, connect your computer

to the USB port of UPS communication port using the supplied

communication cable.

2. Plug the power cord supplied into the input connector on the UPS rear

panel.

3. Plug the UPS power cord into a power outlet.

Figure 2. Typical UPS Installation

Table des matières

Autres manuels Eaton UPS

Eaton

Eaton Powerware 9155 Manuel utilisateur

Eaton

Eaton 9390IT Manuel utilisateur

Eaton

Eaton 5E650i Manuel utilisateur

Eaton

Eaton Powerware 5110 Manuel utilisateur

Eaton

Eaton BladeUPS none Manuel utilisateur

Eaton

Eaton 9SX 6000VA Manuel utilisateur

Eaton

Eaton SPM Series Manuel utilisateur

Eaton

Eaton Powerware 9125 Manuel utilisateur

Eaton

Eaton 5P 1150VA RM Manuel utilisateur

Eaton

Eaton Ellipse ASR 450 Manuel utilisateur

Eaton

Eaton 9SX Series Manuel utilisateur

Eaton

Eaton Powerware 5125 Manuel utilisateur

Eaton

Eaton Powerware 9140 Manuel utilisateur

Eaton

Eaton 5S 550 Manuel utilisateur

Eaton

Eaton 5SC 1000i Rack2U Manuel utilisateur

Eaton

Eaton Powerware 9130 Manuel utilisateur

Eaton

Eaton 9393PM Manuel

Eaton

Eaton Powerware 9125 Manuel utilisateur

Eaton

Eaton 3S 550 Manuel utilisateur

Eaton

Eaton 9315 Manuel utilisateur

Eaton

Eaton 93PM IBC-L Manuel utilisateur

Eaton

Eaton Powerware 9135 Manuel utilisateur

Eaton

Eaton 9PX 700 RT Manuel utilisateur

Eaton

Eaton Ellipse PRO 1600 FR Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur

ZincFive

ZincFive BC Series Manuel utilisateur