Eagle Group Panco Manuel utilisateur

ASSEMBLY INSTRUCTIONS

Panco®Display Rack

Parts List

EG10039 Revised 03/05

• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com

• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100

• Fax: 302/653-2065 or 302/653-3036

#qty description

#1 1 18˝ x 30˝ wire shelf

#2 1 three sided truss frame

#3 1 single truss frame 30˝

#4 1 Panco®display sign

#5 1 top display shelf

#6 2 40˝ post

#7 2 63˝ post with velcro

#8 3 bags of 4 split sleeves

qty description

1 peel-off label for display pan

(not shown)

Step 1 - Attach split sleeves

(for bottom shelf) to posts.

Snap split sleeve onto each post at

the bottom groove covering #3 (the

wider part of the taper goes toward

the bottom).

split

sleeves

split

sleeve

shelf

collar

post

Step 2 - Assemble bottom shelf to posts.

Note: Make sure the velcro on rear posts are facing towards the front.

PART #A206226

CAUTION

INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY

DAMAGE.SAVE YOUR BOX AND ALL PACKING MATERIALS. YOU ARE RESPONSIBLE

FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.

rear posts

(longer with

velcro)

front

posts

(shorter)

display shelf

rear truss

3-sided frame

Step 4 - Assemble 3-sided frame to posts.

Note: Long side goes to the front of the unit

(short posts).

ASSEMBLY INSTRUCTIONS

Panco®Display Rack

Step 3 - Attach split sleeves

(for 3-sided frame) to posts.

Snap split sleeve onto each post at

the groove covering #39 (top of

front posts).

split

sleeves

3-sided

channel

• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com

• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100

• Fax: 302/653-2065 or 302/653-3036

split

sleeve

corner

collar

Step 6 - Assemble rear truss to posts.

Step 5 - Attach split sleeves

(for rear truss) to posts.

Snap split sleeve onto each rear

post at the groove covering #46.

split

sleeves

split

sleeve

truss

collar

rear truss

bottom

shelf

Step 7 - Install display shelf.

Hook display shelf over rear truss with

short flange down, allowing front of shelf

to rest on 3-sided frame.

(Note: If shelf does not fit correctly,

lower rear truss.)

Load pans onto bottom shelf, load one

pan onto display shelf, and attach

peel-off label to pan on display shelf.

sign

Step 8 - Attach sign to rear posts

(using velcro supplied).

Ce manuel convient aux modèles suivants

Autres manuels Eagle Group Support et étagère

Eagle Group

Eagle Group Spec-Bar Manuel utilisateur

Eagle Group

Eagle Group A217614 Manuel utilisateur

Eagle Group

Eagle Group High Density Floor-Trak Manuel utilisateur

Eagle Group

Eagle Group Quik-Set 908858 Manuel utilisateur

Eagle Group

Eagle Group QuadPLUS Polymer Manuel utilisateur

Eagle Group

Eagle Group SGDI-1 Series Manuel

Eagle Group

Eagle Group 317311 Manuel utilisateur

Eagle Group

Eagle Group Dunnage Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur