E Star ESG601 Manuel utilisateur

User’s Guide –ESG601 Glasses

The EStar America ESG601 DLP Link 3D Glasses allow you to experience 3D HDTV in unparalleled quality,

with full resolution and color. All you need to be fully immersed in 3D HDTV content is a 3D-Ready

computer or other 3D-Ready source, one of several DLP Link enabled projectors or televisions, and a pair

of ESG601 glasses.

The ESG601 shutter glasses synchronize to the display using DLP Link, a synchronization method that

improves brightness and eliminates the need for a separate emitter. The glasses are designed for ease of

use and simple maintenance, are rechargeable through USB, have a folding design for compact storage,

and have a cleanup-ready exterior safe for use with sanitizing wipes.

Features

DLP Link sync includes support for new 144 Hz Triple Flash technology

Lightweight design for a comfortable fit

Batteries provide up to 60 hours of use per charge

Large sensor window for a long viewing range

Compatible with most 3D DLP projection systems and extensively tested with all Optoma

Technology DLP Link projectors

The ESA ESG601 DLP-Link 3D Glasses.

All manuals and user guides at all-guides.com

all-guides.com

ESG601 3D Glasses Manual

The ESG601 LCD Shutter Glasses function with the BC100 3D Emitter and your 3D-Ready TV to provide

the ultimate in 3D stereoscopic viewing. This document describes the features, connection, setup, and

operation of the ESG601 LCD Shutter Glasses.

Features

DLP-Link signal for 3D glasses performance that is better than infra-red based systems

96, 100, 120, and 144 Hz “triple flash” capable for today’s and future 3D TVs and Projectors

High contrast ratio, high uniformity and fast response time for excellent 3D experience

Rechargeable battery provides up to 60 hours 3D viewing per charge

Charging Connector

Indicator Light

Power Button

DLP-Link Receiver

Window

All manuals and user guides at all-guides.com

Using the ESG601 3D Glasses

Battery Charging

To charge the ESG601, use the included USB-Power

cable with the custom connector. The custom

connector of the cable attaches to the DC connector on

the top of the left earpiece of the glasses (see photo to

the right). The red LED will turn on while the battery is

being charged. When the battery is fully charged, the

red LED will turn off. The other end of the cable may be

attached to any USB A-type port, such as a port on a USB hub, a computer, or the back of a TV. If

attached to a computer, the ESG601 will use the computer only to receive power; the glasses will not

appear as a device visible to Windows, Mac or other operating systems. The USB cable may also be

attached to a USB charger or a phone charger with an identical connector. The ESG601 battery is

designed to operate up to 60 hours on a full charge, and can be recharged completely in less than two

hours.

Power Button and LED Indicator Function

The inside left earpiece of the frames contains both the Power button and the red/blue LED Indicator

Light.

All manuals and user guides at all-guides.com

Power On and Battery Charge Indicator

Press the On/Off button.

When the indicator light gives two blue flashes and the lenses blink twice from dark to clear, the glasses

are turned on.

(It is possible that the battery in the glasses becomes so empty that nothing happens when you go to

turn the glasses on. If this happens, charge the glasses. It may take a few minutes of charging for the

battery voltage to return to a point where the glasses will turn on at all.)

Manual Power Off

To turn the glasses off, press and hold the On/Off button for more than three seconds; the indicator

light will flash blue three times and the glasses will turn off..

Auto Power Off

The glasses will shut down automatically after 5 minutes with no signal. After 6 seconds with no signal,

the indicator light will blink blue every 3 seconds until finally powering off.

Using the Glasses

Make sure your projector is sending a DLP Link signal. When you look at the screen with the glasses,

images should now be in 3D. Enjoy!

(If you do not see 3D, see Charging the Glasses or Putting the Projector in DLP-Link mode.)

Putting the Projector in DLP Link Mode

Most projectors have a menu that can be accessed from the buttons or remote. In the menu, if “3D” and

“DLP Link” options exist they should both be on. A 3D source must be present, such as a 3D Blu-ray

movie playing in 3D. DLP Link is a visible light signal normally blocked by the lenses that may be visible

with the glasses off as a blue cast in normally completely black areas. Step-by-step for putting the

projector in DLP link mode:

1. Make sure you have a projector that is 3D and supports the DLP-Link protocol. There may be

a DLP-Link logo on the projector, or you may have to consult your projector’s

documentation.

2. Get a 3D image on the screen. The easiest way to do this is to change to attached a 3D Blu-

Ray disc player with HDMI, play a 3D Movie, and verify that you see the double-image on

the screen that is characteristic of all 3D movie theater screens and TVs when you are

watching 3D without the required glasses.

3. Verify that the projector is sending the DLP-Link signal. The easiest way to do this is to turn

on the glasses and check if they are working. Otherwise, you will need to check the manual

that came with your projector to make sure DLP-Link is on. DLP-Link can be showing as “On”

in the menu and not be active if you’ve hacked the previous step by using a PC or other

device that may be sending 3D but not using a DLP Link supported frequency or resolution.

After you’ve used DLP-Link for a while, it is visible with glasses off (but not with glasses on)

All manuals and user guides at all-guides.com

as a bluish cast on black areas. The Wikipedia entry on “DLP Link” has a good set of

reference for more information.

All manuals and user guides at all-guides.com

Detailed Technical Specifications

ESG601 Glasses

Model Name / Part No

EStar America ESG601 DLP Link 3D Glasses

Operating Frequencies

96/100/120/144Hz (48/50/60/72Hz per eye)

Technology

DLP Link is a registered trademark of Texas Instruments

Transmittance

36% (typ)

Left/Right chroma difference

Gx=0.05, Gy=0.05

Dynamic crosstalk

0.2% static

Response time

Tr=0.2ms, Tf=1.3ms (at room temperature)

Viewing angle

80 degrees max

Standby current

<10uA

Continuous working time

>60h

Battery

Lithium Polymer

Battery Capacity

3.7V / 80 mAh

Charging time

2 h

Charging current

100 mA (max)

Charging voltage

DC5V (4.25V –6.5V)

Optical receiver range

>12 meters with a 2000 lumen 3D projector

Environmental compliance

RoHS compliant, Lead-free, WEEE compliant

Primary frame materials

Black injected PC, ABS, and nylon

Nosepiece

Rubber

Operating Temperature

0'C - 40'C

Accessories

Cleaning Cloth, Nose Piece, USB Charging cable

Dimensions

170 x 168 x 40 (mm)

Weight

39g

Battery

Rechargeable Lithium Polymer - Up to 15 Hours use

Range

Up to 100m (Dependent on environment)

Storage Conditions

≤90% Humidity

Display Requirements

Projector / Display must have a “3D Sync” connector (VESA DIN3)

All manuals and user guides at all-guides.com

all-guides.com

REGULATOR NOTICES

EStar America, LLC ESG601

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

FCC COMPLIANCE

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO

THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) TH IS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

All manuals and user guides at all-guides.com

WARNING - SAFETY INFORMATION & PRECAUTIONS

FOR INDOOR USE ONLY. NOT FOR USE AS SUNGLASSES.

THE 3D SYSTEM CONTAINS ELECTRONIC DEVICES AND THE FOLLOWING PRECAUTIONS SHOULD BE

FOLLOWED:

Do not wear 3D glasses for any other activity except viewing 3D pictures. These glasses will

degrade visual perception in normal situations and are only intended for 3D use. Do not

attempt to use as sunglasses.

Handle the lenses carefully, especially when cleaning; too much force can easily damage the

glass. Do not drop any unit or flex the glasses. When cleaning, do not soak, immerse, or over

wet the glasses; these are electronic devices, and moisture can damage or impair their function.

Do not use chemicals containing alcohol, solvents or surfactants or chemicals such as wax,

benzene, thinner, lubricant or cleaners. These may result in discoloration or cracks on the

product surface and cause the indication labels to peel from the product surface. Use only fluids

and products designed for screen cleaning and use them in accordance with the manufacturer’s

recommendations.

IMPORTANT - REVIEW THE FOLLOWING WARNINGS REGARDING THE EFFECTS OF 3D VIEWING PRIOR TO

ENGAGING IN 3D VIEWING AND ENSURE YOU UNDERSTAND THE PRECAUTIONS AND POTENTIAL

IMPACTS THAT 3D VIEWING CAN HAVE ON YOU AND/OR YOUR CHILDREN.

Parental supervision is required especially when children or teenagers view 3D images. You may

wish to consult a physician before allowing young children to view 3D.

3D TV’S and other 3D display devices use high speed flashes of light to generate a 3D effect. The

light flash effect may produce seizures or epileptic seizures in certain individuals in addition to

the following -

oSome light patterns may cause viewers to experience an epileptic seizure or stroke upon

exposure to certain flashing images or light patterns contained in certain 3D television

pictures or 3D video games. You should consult a physician before viewing 3D material

if you or any of your relatives has a history of epilepsy or strokes.

o“Photosensitive epileptic seizures” (reaction to flashes of light) can be caused by an

undiagnosed condition even when family members have no history of epilepsy.

oIf you experience any of the following symptoms immediately stop watching 3D pictures

and consult physician or other medical specialist: altered vision; lightheadedness;

dizziness; involuntary movement such as eye or muscle twitching; confusion; nausea;

loss of awareness of your surroundings; convulsions; muscle cramps;

and/or disorientation. Parents should monitor and discuss with their children the above

All manuals and user guides at all-guides.com

symptoms. Children and teenagers may be more susceptible than adults to

experiencing these symptoms.

oDo not watch 3D picture when you feel incoherent, sleepy, tired or sick. Avoid watching

3D pictures for long periods of time. Take regular breaks, especially during long periods

of 3D viewing.

Watching TV while wearing 3D glasses for an extended period of time may cause headache,

fatigue or dizziness. Remove the glasses and stop watching TV immediately if you experience

this.

Some 3D pictures may startle viewers. Due to the immersive nature of 3D viewing some scenes

may cause viewers to reach out or react suddenly, to avoid these possibly dangerous reactions

the pregnant, young children, elderly, epileptic and those suffering from serious physical

conditions are advised to avoid watching 3D pictures.

You should not watch 3D pictures if you are under the influence of alcohol, suffer from sleep

deprivation or are in poor physical condition.

3D viewing is designed to be immersive. 3D glasses are designed to be worn only in a safe

environment. If you are startled or misconstrue the 3D image as real, you may move in surprise,

contact a nearby object or person and break nearby objects or injure yourself or others.

Do not use the 3D glasses for any purpose other than the purpose it was designed for. Wearing

the 3D glasses for any other purpose (as general spectacles, sunglasses, protective goggles, etc.)

may physically harm you or weaken your eyesight

Some lights, such as compact florescent, florescent, and LED lighting systems, may flicker at rates

that are not perceivable to the naked eye but perceivable when wearing 3D glasses. Some lights

that are particularly bright may also appear to flicker when observed with 3D glasses. DO NOT

look directly into bright lights whether or not you are wearing 3D glasses. If you observe lights

that flicker while wearing 3D glasses, discontinue use of the glasses immediately and turn off or

move the lights so that there is no visible flicker while watching 3D.

WARNING –FIRE AND INJURY

DO NOT puncture, pierce, damage, destroy, or modify the battery contained in the glasses. Puncturing

the battery may result in combustion or a fire, which could lead to severe burns and injury. DO NOT

expose the battery to hot or cold temperature extremes. If there are any signs of damage to the battery,

discontinue use of the glasses immediately.

All manuals and user guides at all-guides.com

Table des matières

Autres manuels E Star Lunettes 3D

E Star

E Star ESG806 Manuel utilisateur

Manuels Lunettes 3D populaires d'autres marques

Sony

Sony BKM-30G Manuel utilisateur

Samsung

Samsung Gear VR SM-R322 Manuel utilisateur

Segula

Segula 50546 Manuel utilisateur

LG 360 VR Manuel utilisateur

Wicked3D

Wicked3D eyeSCREAM Manuel utilisateur

Eyedaptic

Eyedaptic EYE5 Manuel utilisateur

Silhouette

Silhouette TITAN DESIGN Instructions de montage

Soundcore

Soundcore Frames Manuel utilisateur

Wiseup

Wiseup GL2000 Manuel utilisateur

Eschenbach

Eschenbach MaxTV Manuel utilisateur

Mini Gadgets

Mini Gadgets GLSun720 Manuel utilisateur

Happy Electronics

Happy Electronics Mindroid Glasses Manuel utilisateur

BASETech

BASETech 1456965 Manuel utilisateur

YEAZ

YEAZ SUNUP Manuel utilisateur

Dimensional Optics

Dimensional Optics Active 3D Manuel utilisateur

xelux

xelux Smartglass I3 LED Manuel utilisateur

Cyclopital3D

Cyclopital3D HD3D View-Vaster Manuel utilisateur

Panasonic

Panasonic TY-EP3D10EB Manuel utilisateur