E Instruments E500 Manuel utilisateur

FEATURES

Combustion, Flue gas analysis

 Calculation of stack heat loss and efficiency

 CO environment measurement

 Measuring differential pressure

 Draft measurement

 Pressure measurement in the gas supply pipe

KEYBOARD FUNCTIONS

CONTEXT KEYS

The magnets in the back of the instrument can damage

credit cards, hard drives, mechanical watches,

pacemakers, defibrillators and other devices proven

sensitive to magnetic fields.

It is recommended to keep the instrument at a distance

of at least 10” away from any of these devices.

402 Middletown Blvd, Suite 216, Langhorne, PA 19047 USA

Tel: (215) 750-1212; Fax: (215) 750-1399

info@E-Inst.com - www.E-Inst.com

K100000000EJ 030477 180718

15/06/18 10:00

Measurements

►Configuration

Diagnostic

Info. Service OK

15/06/18 10:00

CONFIGURATION

►Analysis

Instrument

Language

Restore

15/06/18 10:00

ANALYSIS

►Fuel

Condensation

O2 Reference

Measure units

Autozero

Air Temp.

Once configured the analysis menu, push repeatedly to go back to the analysis screen and proceed

with the combustion analysis.

ESC

SCAN THE QR CODE

USING THE

E INSTRUMENTS APP

“E-INSTRUMENTS QR

CODE APP”, TO

DOWNLOAD THE DATA.

Before proceeding with the combustion analysis remember to set the proper fuel.

15/06/18 10:00

ANALYSIS [1/5]

O2 4.2 %

CO 23 ppm

CO2 2.9 %

Tf 190.1 C

Ta 15.4 C

Es 91.4 %

FAC-SIMILE

ESC

KEYS FUNCTION

Activate the context keys shown on the display.

Turns on and off the instrument.

- If pressed briefly, accesses the instrument menu.

- If pressed for at least 2 seconds, turns off the instrument.

Exits the current screen.

Confirm settings.

Select and/or Modify.

CONTEXT KEY FUNCTION

This measurement will be stored on the ticket (Printout/QR Code) of the current combustion

analysis.

According to the version of the instrument and/or according with the related setting, it is possible to

print or visualize the QR code.

Proceed with the combustion analysis.

Repeat the autozero phase.

Save

Keep

Repeat

AA SF--A

AAC KP02

Keep

pressed

for a few

seconds

AA AL05

K100000000EJ 030477 180718

Menu→Measurements→Draft

Menu→Measurements→CO air

AA CTA03A

E500

S.n.:0

Fw:1.00

- The Primary Combustion Air temperature is acquired during the Autozero phase.

- Insert the TcK connector of the gas sampling probe before starting the instrument and let it draw clean

air, in order to get a correct temperature value. If the connector is not plugged in, the temperature will not

be acquired.

- Storing of the Ambient Temperature:

Condensing Boilers /Furnaces:

Upon Completion of the Autozero in fresh outdoor air, Press the KEEP button to store the outdoor temperature

being used for primary air

Atmospheric Boilers / Furnaces:

Upon Completion of the Autozero in fresh outdoor air, move the E500 INDOORS to the exact location of the

appliance and once the temperature stabilizes to the INDOOR temperature, Press the KEEP button to store the

indoor temperature being used for primary air

15/06/18 10:00

AutoZero in

Fresh Air

T: 76.8°F

Keep Repeat

15/06/18 10:00

AUTOZERO

AutoZero in Fresh

Air

WARNING!

- Be sure all connections are tight to assure accurate

sampling.

- It is important that water trap & filter be installed

vertically to prevent damage from moisture & particles

to sensors.

- When conducting measurements, the water trap/filter

assembly MUST be in a VERTICAL position.

- When testing is completed, always drain the water trap

with any condensation (after EACH test!).

To measure the draft proceed as follows:

- Connect the probe pressure input hose

to the instrument P+ input.

- Before ZEROing the Pressure/Draft

sensor, please be sure to remove the gas probe

from the stack first

- Upon completion of the Zeroing of the Draft Sensor

insert the probe in the stack to measure the Draft.

It is compulsory to perform the autozero

in clean air, so that the environment CO

measurement results correct. It is

advisable to turn on the instrument and

wait for the autozero completion outside

the area where the test is being

performed.

15/06/18 10:00

DRAFT

Inlet P+

Draft 0.20 h

►Zero sensor

Save Print

15/06/18 10:00

AUTOZERO

Zero sensor

15/06/18 10:00

DRAFT

Inlet P+

Draft 0.01 h

►Zero sensor

Save Print

Save

15/06/18 10:00

CO AIR

CO 412 p

CO Max 413 p

Save Print

Save

15/06/18 10:00

CO air

►Copy number 1

Printer IR

Mode fast

QR Code OFF

Pairing BT

15/06/18 10:00

WARNING

Printing

in progress ...

15/06/18 10:00

DRAFT

Inlet P+

Draft 0.01 h

►Zero sensor

Save Print

15/06/18 10:00

CO AIR

CO 412 p

CO Max 413 p

Save Print

Autres manuels pour E500

Autres manuels E Instruments Instrument de mesure

E Instruments

E Instruments E4500 Manuel d'installation et d'exploitation

E Instruments

E Instruments 1500 Manuel utilisateur

E Instruments

E Instruments 4400 Manuel utilisateur

E Instruments

E Instruments 4400-N Manuel utilisateur

E Instruments

E Instruments AQ COMFORT Manuel d'instructions d'installation

E Instruments

E Instruments AQ Expert Manuel d'instructions d'installation

E Instruments

E Instruments Incuba-103 Manuel utilisateur

E Instruments

E Instruments CT 100 O Manuel utilisateur

E Instruments

E Instruments E500 Manuel utilisateur

E Instruments

E Instruments BTU900 Manuel utilisateur

E Instruments

E Instruments E4500 Manuel utilisateur

E Instruments

E Instruments E8500 Plus Manuel d'instructions d'installation

E Instruments

E Instruments AMI 300 Manuel utilisateur

E Instruments

E Instruments 1100 Manuel utilisateur

E Instruments

E Instruments AQ 200 Manuel utilisateur

E Instruments

E Instruments BTU900 Manuel utilisateur

E Instruments

E Instruments AQ 100 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur