E-Image GH01 Manuel utilisateur

User s Manual

PREFACE FLUID HEAD

Thank you for purchasing E-IMAGE professional heads and

tripods. This manual is an important tool for personnel who

operate and maintain this equipment. Inside, you will

find detailed information about E-IMAGE tripods and

heads, and their proper use. We highly recommend you read

the manual carefully and familiarize yourself with each

section. There is also a section about safety and

maintenance to help you keep your equipment in perfect

condition and extend its life.

Please keep this manual for reference while operating and

maintaining your equipment.

The E-IMAGE GENTING Series is an upgraded generation

of E-Image fluid heads with international

influences, innovative designs, and more advanced

functions. We refined the counterbalance and drag

systems, making balancing faster and simpler. This new

series can handle a wider payload range, from 8.8 to 55

pounds, and works with many different styles of camera. Pan

handles with rubber grips are included for precise camera

movements and are extendable in some models. Each

head also has an installed bubble level, and advanced

heads have an LED light installed for making

adjustments in the dark.

CONTENTS

Fluid Head Specifications.………………….......... 1

Parts(GH03)……………………………….................. 2

Set up & Use..............……………………….......... 3-5

Installing the Pan Handle.……………...................... . 3

Removing the Quick Release Plate…....................... 3

Adjusting Tilt Position……………….......................... 4

Adjusting Pan Position………………......................... 4

Drag Adjustment for Pan and Tilt..…......................... 4

Mounting the Camera…………................................. 5

Extra functions of the GP1 Quick Release Plate…... 6

Parts(GH06-GH25) ………………………………......7

Set Up & Use(GH06-GH25）………………….. 8-12

Installing the Pan Handle..………………................... 8

Mounting to a Tripod.............………………............... 8

Removing the Quick Release Plate………................ 8

Mounting a Camcorder…….………........................... 9

Mounting a Camera……...…………..................... 9-10

Adjusting the Counterbalance Settings.................... 11

Adjusting the Tilt Drag..……………………………….11

Adjusting the Pan Drag.………………………………12

Changing the Batteries (GH08/08L/10/10L )…..…...13

10.

Changing the Batteries (GH15,GH25)………..……14

CONTENTS

Tripod Specifications…………………………………………..15-16

Parts(AT7402A) ……………………………………………...........17

Use AT7402A ……………………………………………...........18-19

1. Releasing and Locking the Legs.....……………….......................18

Adjusting Tripod Height…………..………………..........................18

Anti-Slip Rubber Feet……………………………............................18

4. Folding the Tripod for Storage...………………............................ 19

Parts(GA/GC101) ……………………………………....................20

Parts(GA/GC102) ……………………………………................ ...21

Parts(GA/GC751 GA/GC752) ………………………............. . . 22

Use(GA/GC751 GA/GC752 GA/GC101 GA/GC102) ….23-24

1. Releasing and Locking the Legs....………………....................... 23

Adjusting the Mid-Level Spreader..………………........................ 23

3. Adjusting the Ground Spreader…..........…………....................... 23

Removing the Mid-Level Spreader.………………........................ 24

Installing and Removing a Ground Spreader……………............. 24

Folding the Tripod for Storage…………………............................ 24

Maintenance…………………………………………................. . . . 25

Notices & Warnings………………............................................ 26

Head No.

Fluid Head

E-IMAGE No.

G H

1 2

GH03 75mm 1kg 4kg +90°～-60°

-40℃～80℃

GH05 75mm 1.7kg 3-8kg +90°～-45°

-30℃～60℃

0-2

GH06 75mm 1.6kg 6kg +90°～-60°

-40℃～80℃

0-50-3

GH08 75mm 1.7kg 8kg +90°～-60°

-40℃～80℃

0-6

GH10 75mm 1.9kg 10kg +90°～-60°

-40℃～80℃

1-7

0-3

GH10L

100mm

2kg 10kg +90°～-60°

-40℃～80℃

1-7

0-3

100mm

3.7kg 15kg +80°～-75°

-40℃～80℃

0-90-5

GH15

100mm

+90°～-80°

-40℃～80℃

1-15

0-7

GH25 4kg 25kg

100mm

+90°～-60°

-30℃～60℃

GH20 3.8kg 20kg 0-8

SPECIFICATIONS

Model

No.

Bowl

size

Net

weight

Load

capacity

Grades of

drag

Counterbalance

Tilt range Temperature

range

Variable (Tilt) Fixed

Fixed

Bowl Locking Knob

PARTS(GH03)

Quick 5elease 3late

4XLFN5HOHDVH3ODWH/RFNLQJ.QRE

Quick Release Plate Release Button

Pan Handle Locking Thumb Screw

Pan Handle

Pan Handle Mounting Rosette

Tilt Locking Knob

Tilt Drag Adjustment Knob

GH0165mm 1.3kg 5kg Fixed Fixed +80°～-65°

-30℃~60℃

loose

lock

loose

lock

loose

lock

loose

ReduceIncrease

1.Install Pan Handle

Place the pan handle E in the desired position on the pan handle mounting

rosette F, then secure it by tightening pan handle locking thumb screw D.

2. Removing the Quick Release Plate

Loosen the quick release plate locking knob B, then press the quick release

plate release button C while sliding the plate A towards the back of the head.

5.Tilt Drag Adjustment

Increase tilt drag by turning the tilt drag adjustment knob H clockwise

(as if tightening a screw). Reduce the tilt drag by turning the knob H

counter-clockwise (as if loosening a screw).

3.Adjusting Tilt Position

Loosen the tilt locking knob G to change tilt position. Tighten the knob to

lock the tilt position.

4.Adjusting Pan Position

Loosen the pan locking knob J to change the pan position. Tighten the

knob to lock the pan position.

SET UP & USE (GH03)

3 4

8.Extra Functions of GH03, GH06 plate

The GH03 and GH06 fluid heads have a special clip that allows the GP1

quick release plate to be pressed down into place. Press one side of the

plate against the normal side of the quick release plate track, then press

the other side down against the spring clip until the clip clicks, and the

plate is secured in place.

6. To mount a camera or camcorder, remove the quick release plate

from the tripod head. Attach the plate to the camera using the included

¼”-20 or 3/6”-16 screw. Take care not to over-tighten the screw.

7. With the pan and tilt locked on the head, slide the camera plate onto

the head, moving from the back to the front of the head, until the locking

button C clicks. Balance the camera by placing the camera’s center of

gravity as close to the center of the head as possible, then tighten quick

release plate lock B.

MOUNTING THE CAMERA EXTRA FUNCTIONS OF GH03,GH06 PLATE

5 6

MJRL

loose

lock

loose

lock

loose lock

lock

loose

1. Installing Pan Handle

Place the pan handle A in the desired position on the rosette M and tighten the locking

thumb screw C, making sure the locking washer T is in place between the handle and

rosette. Loosen the length adjustment knob B on the pan handle to adjust the length of

the handle. Length adjustment is only available on GB2 and GB3 pan handles.

2. Installing the Fluid Head on a Tripod

Adjust the tripod to the desired height, and place the ball of the head into the bowl of

the tripod. Level the head using the bubble level R, and secure the bowl locking

knob F onto the bottom of the head on the underside of the tripod bowl.

3. Removing the Quick Release Plate

Loosen locking knob E and hold the release button G while sliding the plate toward

the rear of the head.

SET UP & USE(GH06-GH25)PARTS(GH06~GH25)

7 8

A Pan Handle

Pan Handle Length Adjustment Knob

Pan Handle Locking Thumb Screw

Quick Release Plate Camera Locking Screw

Quick Release Plate Locking Knob

Bowl Locking Knob

Quick Release Plate Release Button

Tilt Locking Knob

Counterbalance Adjustment Dial

Tilt Drag Adjustment Dial

Pan Locking Knob

Pan Drag Adjustment Dial

Pan Handle Mounting Rosette

Bubble Level LED Power Button

Quick Release Plate

Bubble Level

Rubber Washer

Pan Handle Locking Washer

MOUTING THE CAMCORDER VIA ADAPTER

4.Mounting a Large Camera with the PS-C VCT-14 Adapter

4.1 Attach the quick release plate to the bottom of the VCT-14 mounting

adapter (part no. PS-C) using the ¼”-20 or 3/8”-16 screws included with

the head. Take care not to over-tighten the screws when mounting the

plate.

4.2 Slide the quick release plate onto the tripod head. The plate release

button will click when it is in place.

4.3 Make sure the head’s pan and tilt axis are locked, and attach the

camera’s VCT-14 wedge to the PS-C adapter. It will click when it is

locked in place. Loosen the quick release plate lock and adjust the

position of the camera to find the desired center of balance.

5.2 Make sure the head’s pan and tilt axis are locked, then slide the

quick release plate onto the head, moving from the rear to the front. The

plate release button C will click when the plate is in place. Slide the plate

along the track until you find the center of balance, then lock the plate in

place with the locking knob E.

MOUNTING THE CAMERA

910

5.Mounting the Camera to the Quick Release Plate

5.1 Attach the quick release plate to the bottom of the camera using the

included ¼”-20 or 3/8”-16 screws. Take care not to over-tighten the

screw when mounting the camera.

lock loose

6.Adjusting Counterbalance Settings

Loosen the tilt locking knob H and hold the head steady with the pan

handle. Turn the counterbalance dial I to a setting that allows the camera

to remain in position without operator assistance. Lower numbers mean

less tension; higher numbers use more tension to balance loads.

lock loose

7. Adjusting Tilt Drag

Loosen the tilt locking knob H. Turn the tilt drag adjustment dial J to the

desired setting. Lower numbers give less resistance; higher numbers

offer more resistance.

lock loose

8. Adjusting Pan Drag

Loosen the pan locking knob K. Use the pan drag adjustment dial L to set

the desired amount of pan drag. Lower numbers give less drag; higher

numbers offer more resistance.

ADJUSTING COUNTERBALANCE & DRAG ADJUSTING PAN DRAG

11 12

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels E-Image Accessoires pour appareils photo

E-Image

E-Image GH03 Manuel utilisateur

E-Image

E-Image EJ-160 Manuel utilisateur

E-Image

E-Image MTGH10L Manuel utilisateur

E-Image

E-Image MAGIC PTZ Manuel utilisateur

E-Image

E-Image EL-1250S Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur