Dynojet Power Commander III USB EX Manuel utilisateur

i431-411EX 2008 Yamaha Roadstar - PCIII USB EX - 1

2008 YAMAHA

ROADSTAR

INSTALLATION INSTRUCTIONS

Dynojet Research • 2191 Mendenhall Drive • North Las Vegas, NV 89081 • (800) 992-4993

DOWNLOAD THE POWER COMMANDER SOFTWARE AND LATEST MAPS FROM OUR WEBSITE:

WWW.POWERCOMMANDER.COM

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

PARTS LIST

quantity description

1 power commander EX

1USBcable

1cd-rom

1 installation guide

1poweradapter

2 power commander decal

2dynojetdecal

2 dual lock velcro strip

1 alcohol swab USB port

expansion port

i431-411EX

2008 Yamaha Roadstar - PCIII USB EX - 2

The ignition must be turned OFF before

installation.

1 Remove the seat.

2 Remove the fuel tank.

3 Remove the right hand side air box as shown

in Figure A.

4 Remove the left hand side cover.

5 Lay the PCIII USB EX under the left hand side

cover next to the fuse box.

6 Route the PCIII USB EX wiring harness behind

the left hand frame tube and follow the main

wiring harness towards the front of the bike as

shown in Figure B.

Use the stock wire tie to secure the

PCIII USB EX wiring harness in place.

7 Locate the clear 6-pin connector under the

main frame spar as shown in Figure C.

Unplug this connector.

Figure AFigure BFigure C

air box

PCIII USB EX

wiring harness

unplug connector

i431-411EX

2008 Yamaha Roadstar - PCIII USB EX - 3

8 Attach the connectors from the PCIII USB EX

harness to the throttle bodies and the stock

wiring harness connectors as shown in

Figure D.

9 Locate the stock Throttle Position Sensor (TPS)

connector as shown in Figure E.

The TPS connector is located on the right hand

side of the bike to the rear of the throttle body.

10 Unplug the TPS connector.

11 Attach the connectors from the PCIII USB EX

harness to the stock TPS and stock wiring

harness as shown in Figure F.

Figure DFigure EFigure F

PCIII USB EX

connectors

stock

connectors

unplug connector

stock connector

PCIII USB EX

connectors

i431-411EX

2008 Yamaha Roadstar - PCIII USB EX - 4

12 Locate the white 2-pin connector taped to the

main wiring harness.

This connector is located under the left hand

side cover.

13 Remove the tape securing this connector to

the main wiring harness and remove the cap as

shown in Figure G.

14 Attach the red wire from the PCIII USB EX

harness to the stock wiring harness as shown

in Figure H.

15 Attach the ground wire from the PCIII USB EX

to the negative side of the battery as shown in

Figure I.

Figure GFigure HFigure I

remove cap

PCIII USB EX

connector

ground wire from

PCIII USB EX

i431-411EX

2008 Yamaha Roadstar - PCIII USB EX - 5

16 Using the supplied velcro, secure the

PCIII USB EX to the fuse box under the right

hand side cover as shown in Figure J. Make

sure to clean both surfaces with the alcohol

swab before attaching.

17 Reinstall the side cover, fuel tank, and air box.

18 Insert the cd provided into your computer’s

cd-rom drive.

19 Follow the on-screen instructions to install the

PCIII USB EX software.

Visit www.powercommander.com to download

software tutorials and the latest maps.

Figure J

Table des matières

Autres manuels Dynojet Accessoires automobiles

Dynojet

Dynojet Power commander V Manuel utilisateur

Dynojet

Dynojet Power Vision PV3-25-02 Manuel utilisateur

Dynojet

Dynojet Power commander V Manuel utilisateur

Dynojet

Dynojet POWER VISION PV3-25-04 Manuel utilisateur

Dynojet

Dynojet Power commander V Manuel utilisateur

Dynojet

Dynojet Power Commander III USB Manuel utilisateur

Dynojet

Dynojet Power commander V Manuel utilisateur

Dynojet

Dynojet power commander III Manuel utilisateur

Dynojet

Dynojet Power commander V Manuel utilisateur

Dynojet

Dynojet POWER VISION PV3-25-08 Manuel utilisateur

Dynojet

Dynojet LCM Manuel utilisateur

Dynojet

Dynojet POWER VISION 3 Manuel utilisateur

Dynojet

Dynojet Power Vision Manuel utilisateur

Dynojet

Dynojet Power Commander III Manuel utilisateur

Dynojet

Dynojet Power commander V Manuel utilisateur

Dynojet

Dynojet Power Vision Manuel utilisateur

Dynojet

Dynojet Power commander V Manuel utilisateur

Dynojet

Dynojet Power commander V Manuel utilisateur

Dynojet

Dynojet Power Vision Manuel utilisateur

Dynojet

Dynojet Auto Tune Manuel utilisateur

Dynojet

Dynojet Power commander V Manuel utilisateur

Dynojet

Dynojet Power commander V Manuel utilisateur

Dynojet

Dynojet Power commander V Manuel utilisateur

Dynojet

Dynojet Power commander V Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur