Dynex DX-DRTVM102 Manuel utilisateur

ASSEMBLY INSTRUCTIONS

DX-DRTVM102

Medium Low Profile Wall Mount with Optional -5° Tilt

Safety information and

specifications...........................................2

TVs the wall mount fits ........................3

Tools needed ...........................................3

Parts ............................................................4

Hardware...................................................5

Assembly instructions..........................6

For wood-stud, concrete-wall, or

concrete-bloack installation

2DX-DRTVM102

Need help? Call 800-305-2204

Safety information and specifications

IMPORTANT SAFETY INSTRUCTIONS -

SAVE THESE INSTRUCTIONS

CAUTION: Do not use this product for any

purpose not explicitly specified by Dynex.

Improper installation may cause property

damage or personal injury. If you do not

understand these directions, or have doubts

about the safety of the installation, contact Customer

Service or call a qualified contractor. Dynex is not

responsible for damage or injury caused by incorrect

installation or use.

The weight of your TV must not exceed 50 lbs. (22.6 kg).

The wall must be capable of supporting five times the

weight of the TV and wall mount combined.

This product contains small items that could be a choking hazard if swallowed. Keep these items away from young

children!

This product is not designed for use in metal stud walls.

Model #: DX-DRTVM102

Distributed by Best Buy Purchasing, LLC

Manufacturer: Milestone/Secura

Maximum weight: 50 lbs. (22.6 kg)

Screen size: 22" to 37" diagonal

Overall dimensions (W × H): 13.9" x 9.84" (353 x 250 mm)

Wall-mount weight: 3 lbs. (1.36 kg)

We’re here for you

www.dynexproducts.com

For customer service, call:

800-305-2204 (U.S./Canada markets)

9.84" (250 mm)

13.9" (353 mm)

DX-DRTVM102

Need help? Call 800-305-2204

TVs the wall mount fits

The wall mount fits TVs with M4, M5, or M6 screw holes that are the following distances apart:

13.78" (350 mm) maximum horizontal distance

9.06" (230 mm) vertical distance

Tools needed

You will need the following tools to assemble your new wall mount:

Edge-to-edge stud finder Pencil Tape measure Hammer

Level Phillips screwdriver

Socket wrench with 1/2" (13 mm)

socket or adjustable wrench

Drill 7/32" (5.5 mm) wood drill

bit for wood stud wall

3/8" (10 mm) masonry

drill bit for concrete wall

4DX-DRTVM102

Need help? Call 800-305-2204

Part s

Package contents: parts

Make sure you have all the parts necessary to assemble your new TV wall mount:

03 Right TV

bracket (1)

01 Wall plate (1) 02 Left TV

bracket (1)

DX-DRTVM102

Need help? Call 800-305-2204

Hardware

Package contents: hardware

Note: Not all hardware will be used.

Make sure you have all the hardware necessary to assemble your new wall mount:

Label Hardware Qty.

04 2

05 2

06 2

07 4

08 4

09 4

10 4

5/16" × 2 3/4" lag bolt

(7.9 mm × 69.9 mm)

5/16" (7.9 mm)

washer

Concrete anchor

M4 × 12 mm screw

M4 × 30 mm

screw

M5 × 12 mm screw

M5 × 30 mm

screw

Label Hardware Qty.

11 4

12 4

13 4

14 8

15 4

16 4

17 4

M6 × 12 mm screw

M6 × 20 mm screw

M6 × 35 mm

screw

M4/M5 washer

M6 washer

M4/M5 spacer

M6 spacer

10 20 30 40 50 60 70 80 90 100mm

1234in

6DX-DRTVM102

Need help? Call 800-305-2204

Assembly instructions

Step 1: Adjust the tilt

Note: The tilt on the left TV bracket (02) and right TV bracket (03) must be the same.

1Use a Phillips screwdriver to remove the two tilt screws (S) from the outside edges of each TV bracket (02

and 03).

2To tilt the TV forward by 5°, push the tilt brackets on the left TV bracket (02) and right TV bracket (03) down.

To keep the TV completely vertical, push tilt brackets on the left TV bracket (02) and right TV bracket (03) up.

3Re-insert two tilt screws (S) into each TV brackets (02 and 03), then tighten the screws.

Caution: Do not over tighten the screws.

You’ll need:

S S

02 03 02 03

S S

02 03 02 03

Option 1: Mount tilted -5°

Option 2: Mount not tilted

Tilt bracket

Phillips screwdriver

DX-DRTVM102

Need help? Call 800-305-2204

Step 2: Determine whether your TV has a flat back or an irregular or obstructed back

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and

scratches.

2If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for

instructions.

3Align the screw holes in the brackets with the mounting screw holes on your TV. Position the brackets so they do

not extend above or below your TV and do not cover any connectors or jacks. Make note of which bracket screw

holes you will use.

If the brackets lay flush against the back of your TV and do not block any jacks, your TV has a flat back.

If there is a gap between a bracket and some part of the back of your TV, your TV has an irregularly-shaped back.

If a bracket blocks any jacks, your TV has an obstructed back. In either case, you need spacers.

4Remove the brackets.

Flat back (no spacers needed)

Obstructed back (spacers needed)

Irregular back (spacers needed)

8DX-DRTVM102

Need help? Call 800-305-2204

Step 3: Select screws and spacers

1Select the hardware for your TV (screws, washers, and spacers). See the documentation that came with your TV

for screw length and diameter.

Select one of the following types of screws:

Select one of the following types of washers:

For an irregular or obstructed TV back, select one of the following types of spacers:

2Hand thread screws into the threaded screw holes on the back of your TV to determine the correct screw

diameter and length. If your TV has an irregular or obstructed back, place a spacer between your TV back and the

screw to make sure you have the correct length.

Caution: To avoid potential personal injuries and property damage,

make sure that there are adequate threads to secure the brackets to

your TV. If you encounter resistance, stop immediately and contact

customer service. Use the shortest screw and spacer combination to

accommodate your TV. Using hardware that is too long may damage

your TV. However, using a screw that is too short may cause your TV

to fall from the mount.

3Remove the screws.

For a flat back TV, go to “Step 4: Install the TV brackets Option 1: Installing for a TV with a flat back” on

page 9.

For an irregular or obstructed back, go to “Step 4: Install the TV brackets (continued) Option 2: Installing

for a TV with an irregular or obstructed back” on page 10.

M4 × 12 mm screws (07)M6×12mmscrews(11)

M4 × 30 mm screws (08)M6×20mmscrews(12)

M5 × 12 mm screws (09)M6×35mmscrews(13)

M5 × 30 mm screws (10)

M4/M5 washers (14) M6 washers (15)

M4/M5 spacers (16) M6 spacers (17)

Screw is

too long

Screw fits

correctly

Screw is

too short

DX-DRTVM102

Need help? Call 800-305-2204

Step 4: Install the TV brackets

Option 1: Installing for a TV with a flat back

1Align the holes you noted on the left TV bracket (02) and right TV bracket (03) with the screw holes on the back

of your TV. The brackets are marked “R” for the right bracket and “L” for the left bracket.

2Place the M4/M5 washers (14) or M6 washers (15) over the holes in the TV brackets that align with the screw

holes on the back of your TV, then insert the M4 screws (07), M5 screws (09), or M6 screws (11 or 12).

3Tighten the screws until they are snug against the TV bracket. Do not over tighten.

You’ll need:

0203

14 15

11 12

7 9

0302 &

07 (4) 09 (4) Phillips screwdriver

Screws

11 (4)

12 (4)

OR OR

Washers

14 (4) 15 (4)

10 DX-DRTVM102

Need help? Call 800-305-2204

Step 4: Install the TV brackets (continued)

Option 2: Installing for a TV with an irregular or obstructed back

1Place M4/M5 spacers (16) or M6 spacers (17) over the mounting holes in the back of your TV.

2If you are using M4 or M5 screws, place M4/M5 washers (14) over the spacers.

3Align the holes you noted on the left TV bracket (02) and right TV bracket (03) with the spacers. The brackets are

marked “R” for the right bracket and “L” for the left bracket.

4Place M4/M5 washers (14) or M6 washers (15) over the holes in the TV brackets, then insert M4 screws (08),

M5 screws (10), or M6 screws (13).

5Tighten the screws until they are snug against the TV bracket. Do not over tighten.

You’ll need:

0203

81310

0302

14 15

08 (4) 10 (4)

Phillips screwdriver

Screws

13 (4) 16 (4)

OR OROR

Washers

14 (8) 15 (4)

Spacers

17 (4)

Autres manuels pour DX-DRTVM102

Table des matières

Autres manuels Dynex Support et étagère

Dynex

Dynex DX-WD1239 Mode d’emploi

Dynex

Dynex DX-TVM112 Manuel utilisateur

Dynex

Dynex DX-WD1239 Manuel utilisateur

Dynex

Dynex DX-WD1335 Mode d’emploi

Dynex

Dynex DX-MLET21 Manuel utilisateur

Dynex

Dynex DX-MP3MT Manuel utilisateur

Dynex

Dynex DX-MP3MT Manuel d'installation et d'exploitation

Dynex

Dynex DX-DTVMFP23 Manuel utilisateur

Dynex

Dynex DX-SWM2B Manuel utilisateur

Dynex

Dynex DX-SWM2B Manuel utilisateur

Dynex

Dynex DX-WD1335 Manuel utilisateur

Dynex

Dynex DX-MP3MT Manuel utilisateur

Dynex

Dynex DX-WD1335 Mode d’emploi

Dynex

Dynex DX-MP3MT Manuel de la liste des pièces

Dynex

Dynex DX-DTVMFP23 Manuel utilisateur

Dynex

Dynex DX-HTVMM1703-C Manuel utilisateur

Dynex

Dynex DX-WD1239 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur