Dynapac DRP25D Manuel utilisateur
Operang Instrucon
Original Operang Instrucons
DRP25D
Reversible vibratory plate
S/N 101 924 58 1001>
DL8 203 70 EN ©
04/2018
2
Table of contents
1 Introduction........................................................................................................................................... 7
1.1 Foreword........................................................................................................................................ 8
1.2 Machine type plate and engine type plate................................................................................ 10
2 Technical data...................................................................................................................................... 11
2.1 Noise and vibration data............................................................................................................ 13
2.1.1 Noise data.................................................................................................................................. 14
2.1.2 Vibration data............................................................................................................................. 14
3 Concerning your safety...................................................................................................................... 15
3.1 Basic prerequisites..................................................................................................................... 16
3.1.1 General...................................................................................................................................... 16
3.1.2 Explanation of signal words used:.............................................................................................. 16
3.1.3 Personal protective equipment................................................................................................... 17
3.1.4 Intended use.............................................................................................................................. 18
3.1.5 Improper use.............................................................................................................................. 18
3.2 Definition of responsible persons............................................................................................. 20
3.2.1 Operating company.................................................................................................................... 20
3.2.2 Expert / qualified person............................................................................................................ 20
3.2.3 Driver / operator......................................................................................................................... 20
3.3 Basic safety regulations for safe operation............................................................................. 22
3.3.1 Remaining dangers, remaining risks.......................................................................................... 22
3.3.2 Regular safety inspections......................................................................................................... 22
3.3.3 Modifications and alterations to the machine............................................................................. 22
3.3.4 Damage, defects, misuse of safety devices............................................................................... 22
3.4 Handling fuels and lubricants.................................................................................................... 23
3.4.1 Preliminary remarks................................................................................................................... 23
3.4.2 Safety regulations and environmental protection regulations for handling diesel fuel............... 24
3.4.3 Safety regulations and environmental protection regulations for handling oil............................ 25
3.4.4 Safety regulations and environmental protection regulations for handling hydraulic oil............. 26
3.5 Loading/transporting the machine............................................................................................ 27
3.6 Start-up procedure...................................................................................................................... 28
3.6.1 Prior to starting up...................................................................................................................... 28
3.6.2 Starting the engine..................................................................................................................... 28
3.7 Working operation...................................................................................................................... 29
3.7.1 Persons in the danger area........................................................................................................ 29
3.7.2 Operation................................................................................................................................... 29
3.7.3 Parking the machine.................................................................................................................. 29
3.8 Refuelling..................................................................................................................................... 30
3.9 Maintenance work....................................................................................................................... 31
3.9.1 Preliminary remarks................................................................................................................... 31
3.9.2 Working on the engine............................................................................................................... 31
3.9.3 Cleaning work............................................................................................................................ 31
3.9.4 After maintenance work............................................................................................................. 31
3.10 Repair......................................................................................................................................... 32
3.11 Signage...................................................................................................................................... 33
Table of contents
DRP25D
3
4 Indicators and control elements........................................................................................................ 37
5 Checks prior to start up...................................................................................................................... 39
5.1 Notes on safety........................................................................................................................... 40
5.2 Visual inspections and function tests....................................................................................... 41
5.3 Checking the engine oil level..................................................................................................... 42
5.4 Checking the fuel level; topping up fuel................................................................................... 43
5.5 Checking the rubber buffers...................................................................................................... 44
6 Operation............................................................................................................................................. 45
6.1 Folding down the steering rod................................................................................................... 46
6.2 Starting the engine...................................................................................................................... 47
6.3 Operation..................................................................................................................................... 49
6.4 Parking the machine in secured condition............................................................................... 51
7 Loading / transporting the machine.................................................................................................. 53
7.1 Loading the machine.................................................................................................................. 54
7.2 Lashing the machine to the transport vehicle.......................................................................... 55
7.3 Transport wheels......................................................................................................................... 56
8 Maintenance........................................................................................................................................ 59
8.1 Preliminary remarks and safety notes...................................................................................... 60
8.2 Preparations/concluding work................................................................................................... 61
8.2.1 Opening the protection hood...................................................................................................... 61
8.3 Fuels and lubricants................................................................................................................... 62
8.3.1 Engine oil................................................................................................................................... 62
8.3.2 Fuel............................................................................................................................................ 62
8.3.3 Oil for exciter shaft housing........................................................................................................ 63
8.3.4 Mineral oil based hydraulic oil.................................................................................................... 63
8.4 List of fuels and lubricants........................................................................................................ 65
8.5 Running-in instructions.............................................................................................................. 66
8.5.1 General...................................................................................................................................... 66
8.5.2 After 25 operating hours............................................................................................................. 66
8.6 Maintenance Table...................................................................................................................... 67
8.7 Weekly.......................................................................................................................................... 68
8.7.1 Checking, cleaning the air filter.................................................................................................. 68
8.7.2 Checking and cleaning the water separator............................................................................... 69
8.8 Annually....................................................................................................................................... 71
8.8.1 Changing the engine oil and cleaning the oil filter...................................................................... 71
8.8.2 Changing the oil in the exciter housing...................................................................................... 73
8.8.3 Replacing the air filter................................................................................................................ 74
8.8.4 Replacing the fuel filter............................................................................................................... 75
8.8.5 Replacing the V-belt................................................................................................................... 76
8.8.6 Checking, adjusting the valve clearance.................................................................................... 78
8.8.7 Replacing the starter rope.......................................................................................................... 80
8.8.8 Checking the hydraulic oil level.................................................................................................. 82
8.9 Every 2 years / every 500 operating hours............................................................................... 84
8.9.1 Changing the hydraulic oil.......................................................................................................... 84
8.10 As required................................................................................................................................ 86
Table of contents
DRP25D
4
8.10.1 Cleaning the cooling fins and the cooling air intake openings................................................. 86
8.10.2 Cleaning the machine.............................................................................................................. 86
8.10.3 Servicing the V-belt.................................................................................................................. 87
8.10.4 Checking the oil level in the exciter housing............................................................................ 88
8.10.5 Measures prior to extended shut-down period......................................................................... 88
9 Troubleshooting.................................................................................................................................. 91
9.1 Preliminary remarks.................................................................................................................... 92
9.2 Engine faults................................................................................................................................ 93
9.3 Malfunctions during operation.................................................................................................. 95
10 Disposal............................................................................................................................................... 97
10.1 Final decommissioning of machine........................................................................................ 98
Table of contents
DRP25D
5
Table of contents
DRP25D
6
1 Introduction
Introduction
DRP25D
7
1.1 Foreword
These operating and maintenance instructions are part of your
machine.
They provide necessary information to operate your machine
safely and properly.
They also contain information on required operating, maintenance
and repair measures.
Carefully read the operating and maintenance instructions before
taking your machine into operation.
Please observe the safety regulations strictly and follow all instruc-
tions to ensure safe operation.
If you are not yet acquainted with the indicators and control ele-
ments on this machine, you should thoroughly read the corre-
sponding chapter
Ä
Chapter 4 „Indicators and control ele-
ments“ on page 37.
The description of the individual operating steps including the
notes on safety to be followed can be found in chapter “Operation”
Ä
Chapter 6 „Operation“ on page 45.
Before every start up, carry out all required visual inspections and
function tests
Ä
Chapter 5 „Checks prior to start up“ on page 39.
Ensure the compliance with the specified operating, maintenance
and repair measures to maintain the functional safety of your
machine.
A description of all necessary maintenance work, maintenance
intervals as well as information on fuels and lubricants can be
found in the chapter “Maintenance”
Ä
Chapter 8 „Mainte-
nance“ on page 59.
Do not service or repair your machine by yourself to avoid harming
persons or damaging material or environment.
The machine must only be serviced and repaired by qualified and
authorised personnel.
Contact our customer service to carry out the required mainte-
nance work or necessary repairs.
In case of operating errors, inadequate maintenance or the use of
unapproved fuels and lubricants all warranty claims will become
null and void.
For your own personal safety you should only use original parts
from Dynapac.
For your machine we offer service kits to make maintenance
easier.
In the course of technical development we reserve the right for
technical modifications without prior notification.
These operating and maintenance instructions are also available in
other languages.
Apart from that, you can also order the spare parts catalogue
against the serial number of your machine.
Introduction – Foreword
DRP25D
8
The above notes do not constitute an extension of the warranty
and liability conditions specified in the general sales and delivery
conditions of Dynapac GmbH.
We wish you successful work with your Dynapac machine.
Introduction – Foreword
DRP25D
9
1.2 Machine type plate and engine type plate
Please enter here:
Machine type (1):
Serial number (2):
Please enter here:
Engine type (1):
Engine number (2):
Made by
Designation Type
Nominal Power Operating Mass Year of Construction
Serial-No.
Made in Germany
Ammerländer Str. 93
D-26203 Wardenburg
1
2
B-924-0001
Fig. 1: Machine type plate (example)
Fig. 2: Engine type plate (example)
Introduction – Machine type plate and engine type plate
DRP25D
10
Table des matières
Autres manuels Dynapac Outils électriques
Dynapac
Dynapac LH800 Guide de dépannage
Dynapac
Dynapac LF90 Guide de dépannage
Dynapac
Dynapac DRP20 Manuel utilisateur
Dynapac
Dynapac LH 300 Guide de dépannage
Dynapac
Dynapac BG70 Manuel de l'installateur
Dynapac
Dynapac DFP10D Instructions d'utilisation
Dynapac
Dynapac VB 340V Manuel utilisateur
Dynapac
Dynapac DFP9 Manuel utilisateur
Dynapac
Dynapac DFP12D Manuel utilisateur
Dynapac
Dynapac LG140 Manuel
