DynAmp LKP-8024 Manuel
Model LKP-8024
DIRECT CURRENT METERING SYSTEMS
Installation, Operation and Service Instructions
Manual Item No. 041837
Rev. H
DynAmp, LLC 3735 Gantz Road Phone +1 614.871.6900 www.dynamp.com
Installation, Operation and Service Manual LKP Series
This Page is Intentionally Blank
© 2011 DynAmp, LLC Page ii
041837 H
Installation, Operation and Service Manual LKP Series
DynAmp, LLC WARRANTY
Items and components manufactured by Seller for permanent installation are warranted for
two (2) years from the date of shipment.
Items and components manufactured by Seller for portable and temporary use in more than
one location are warranted to be free from defects in material and workmanship for a period
of eighteen (18) months from the date of shipment.
Items and components not manufactured and resold by Seller are warranted by their
manufacturer.
Warranty repair shall be, at DynAmp’s option, in the form of repair or replacement of the
defective items or components. Concerning warranty repairs, DynAmp will be responsible
for DynAmp provided time, material and transportation costs (shipping or travel). Actual
method of warranty repair / correction will be determined by DynAmp at DynAmp’s sole
option. Such warranty repair shall constitute a fulfillment of all DynAmp, LLC liabilities in
respect to said items and components. In no event shall DynAmp, LLC be liable for
consequential damages.
Information in this document is subject to change without notice.
© 1999, 2000, 2001, 2002, 2004, 2005, 2008, 2011 DynAmp, LLC. All rights reserved.
Reproduction for purposes other than operation and service without written permission of DynAmp, LLC
is strictly forbidden.
This manual includes detailed drawings, installation, operation, service and maintenance. Users should
evaluate the information in the manual and their particular application. DynAmp assumes no liability for
any incidental, indirect, or consequential damages arising fro the use of this documentation.
While all information presented is believed to be reliable and in accordance with accepted engineering
practices, DynAmp makes no warranties as to the completeness of the information.
© 2011 DynAmp, LLC Page iii
041837 H
Installation, Operation and Service Manual LKP Series
This Page is Intentionally Blank
© 2011 DynAmp, LLC Page iv
041837 H
Installation, Operation and Service Manual LKP Series
Hazard Warning!
All installation, maintenance and service must be performed by qualified
technicians who are familiar with the warnings and instructions of this manual.
The enclosure doors must remain closed at all times during operation to ensure
safety of personnel. A set of keys may be provided for locking the doors. Only
authorized personnel or technicians should open and service the unit.
Disconnect power to the system before servicing or replacing fuses.
Use of the equipment in a manner not specified by the manufacturer can impair
the protection provided within.
DynAmp does not assume liability for the customer’s failure to comply with the
rules and requirements provided in this manual.
GENERAL
This equipment is designed to be connected to hazardous electric voltages.
Ignoring the installation precautions and warnings can result in severe personal
injury or equipment damage.
To avoid the risk of electrical shock or fire, the safety instructions and guidelines
in this manual must be followed. The electrical specifications must not be
exceeded and the unit must be installed according to directions provided.
HAZARDOUS
VOLTAGE
These instructions apply only to retrofit kits installed on standard systems as
originally supplied by Halmar Electronics or DynAmp. Customer is responsible to
verify that the units are standard and do not have non-standard, customer
modifications installed. Before installing the upgrade kit, document any
modifications and contact DynAmp, LLC Service Department for further written
instructions to deal with the non-standard circumstances.
The installer is responsible for any damages resulting from improper installation
of upgrade kit.
This equipment is intended for indoor use only. It should be mounted in a well-
ventilated area, away from high heat, dust, and corrosive atmosphere. The
ambient temperature must not exceed 55°C.
For mounting considerations that fall outside the recommended specifications
provided in this manual, the factory should be contacted for approval.
INSTALLATION
Symbol
Identification:
General definitions of safety symbols used on equipment and manual
Caution/Warning: Refer to accompanying documents for instructions.
© 2011 DynAmp, LLC Page v
041837 H
Installation, Operation and Service Manual LKP Series
This Page is Intentionally Blank
© 2011 DynAmp, LLC Page vi
041837 H
Installation, Operation and Service Manual LKP Series
DynAmp, LLC Customer Support
For further assistance, contact DynAmp Customer Support at:
Americas:
Telephone: +1 614.871.6900 Fax: +1 614.871.6910
8:00 AM to 5:00 PM USA Eastern Time
From first Sunday in November to second Sunday in March – 13:00 GMT to 22:00 GMT
From second Sunday in March to first Sunday in November – 12:00 GMT to 21:00 GMT
Europe:
Telephone: +41 22.706.1446 Fax: +41 22.706.1311
8:30 AM to 5:00 PM Central European Time
From last Sunday in October to last Sunday in March – 7:30 GMT to 16:00 GMT
From last Sunday in March to last Sunday in October – 6:30 GMT to 15:00 GMT
After Hours Critical Service Emergency:
Telephone: +1 614.871.6906
5:00 PM to 8:00 AM USA Eastern Time
From first Sunday in November to second Sunday in March – 22:00 GMT to 13:00 GMT
From second Sunday in March to first Sunday in November – 21:00 GMT to 12:00 GMT
Central e-mail:
DynAmp web:
www.dynamp.com
© 2011 DynAmp, LLC Page vii
041837 H
Installation, Operation and Service Manual LKP Series
This Page is Intentionally Blank
© 2011 DynAmp, LLC Page viii
041837 H
Installation, Operation and Service Manual LKP Series
REVISION PAGE
Page Change Reason For Revision Date
all Rev NEW 12/99
all A Warranty, Hazard Warning, Calibration Intervals, add
Technical Bulletin List, update drawing to current revision
12/00
19 B Deleted text regarding Hall Sensor power supply.
3/01
18, 24 C Updated Accuracy Diagnostics & Spare Parts section 04/02
all Rev D Update to DynAmp, LLC 12/04
22 Rev E Update per ECR-1245 – Remove 6-3. “Five Year Service”
and revised 6.2 (F.)
11/05
v, 1, 22,
24
Rev F Update fuse precautions per ECR 1304 07/06
29 G ECO 3166 update accuracy diagnostics drawings/list 09/08
all H PAR 10245 – Handling & Storage, ECR 1440- Calibration
Intervals / New Manual Format
06/11
© 2011 DynAmp, LLC Page ix
041837 H
Installation, Operation and Service Manual LKP Series
This Page is Intentionally Blank
© 2011 DynAmp, LLC Page x
041837 H
Table des matières
Autres manuels DynAmp Instrument de mesure
DynAmp
DynAmp LKP-100 Guide de configuration
DynAmp
DynAmp LKP Series Guide de configuration
DynAmp
DynAmp LKP Series Guide de configuration
DynAmp
DynAmp LKAT2 Guide de configuration
DynAmp
DynAmp RCEM Guide de configuration
DynAmp
DynAmp LKAT Plus Guide de configuration
DynAmp
DynAmp LKP-180 Manuel
DynAmp
DynAmp LKAT2 Manuel
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur