DynaMetric TLP-104SY Manuel utilisateur
Instructions
TLP-104SY Telephone Logger Patch
P/N 44160-3 C Series
FOR LEGAL USE ONLY 3-19-08
www.DynaMetric.com Page 1 of 2 ©DynaMetric 2001 Doc 43685
The TLP-104SY provides an analog audio connection to loggers from telephones that
have modular connected handsets. The TLP-104SY will provide a clear recording of
both sides of your conversation from almost all telephones whether they are analog or
digital.
The TLP-104SY is similar to the TLP-104 except that the TLP-104SY has 15db of
amplification of the audio output to the logger. A recording will be made whenever the
handset is used. The unit is powered by a plug in AC adapter, which is included.
NOTE: Pins 3 & 4 of the RJ11 jack carry the analog audio to the logger and are the
only two conductors connected.
RJ-11 Receptacle
(6 position, 4 pin)
1-800-525-6925www.DynaMetric.com
717 S. Myrtle Ave., Monrovia, CA 91016
Telephone Logger Patch
TLP-104SY
®
Made In USA
DynaMetric
AC Adapter
P/N 39184
MINIMOD Plug
Plug into
Base of Phone
MINIMOD Handset Jack
Instructions
TLP-104SY Telephone Logger Patch
P/N 44160-3 C Series
FOR LEGAL USE ONLY 3-19-08
www.DynaMetric.com Page 2 of 2 ©DynaMetric 2001 Doc 43685
To install the unit, disconnect the handset coil cord from the base of the telephone and
replace it with the MINIMOD plug from the TLP-104SY. Connect the handset coil cord
into the MINIMOD jack on the TLP-104SY. Connect a line cord from the logger into the
RJ11 jack on the TLP-104SY. Plug in the AC Adapter to a nearby 120 VAC outlet and
into the power jack on the TLP-104SY. The unit may be mounted at a convenient
location on the base of the phone utilizing the adhesive pad.
5 OPEN
4 AUDIO TO RECORDER
3 AUDIO TO RECORDER
2 OPEN
STD LINE CORD
6
5
4
3
2
1
RJ-11 PLUGRJ-11 JACK
6
5
4
3
2
1
PLUG TAB OPENING
RJ-11 Receptacle
6VDC
AC Adapter
P/N 39184
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels DynaMetric Système téléphonique
