Dwyer Instruments DPMF Series Manuel utilisateur

The Model DPMF Flush Mount LCD Digital Panel Meter offers high

performance and low cost in a compact package. This meter is designed

with a 3-1/2 digit, high contrast CD display. The unit is powered by a 4

to 20 mA DC control loop input. Standard features include adjustable

span and zero, and field-selectable decimal point position. The flat pack

of the panel meter allows for the instrument to be mounted to any flat

surface.

I STALLATIO

The Model DPMF is designed for surface mounting on any flat surface.

WIRI G

The unit is powered by a 4 to 20 mA loop and the screw terminals for

wiring are located on the back of the adder board marked with + PWR-.

Series DPMF Flush Mount LCD Digital Panel Meter

Installation and Operating Instructions

Bulletin PC-DPMF

SPECIFICATIO S

Input: 4 to 20 mA DC.

Input Impedance: 300 Ω nominal.

Accuracy: ±(0.1% FS + 2 count).

Power Supply: Powered by control loop.

Span and Zero: Adjustable (±1999 counts).

Display: 3-1/2 digits, 7 segments, 0.5˝ (12 mm) H.

Decimal Points: 3-position, user selectable.

Polarity: Automatic, “-” displayed.

Operating Temperature: 32 to 122°F (0 to 50°C).

Storage Temperature: -4 to 158°F (-20 to 70°C).

Mounting: Surface mount.

Connection: Screw terminals.

Conversion Rate: 3 per second.

Warm-Up: 10 minutes typical.

Weight: 1.2 oz (34.5 g).

Agency Approvals: RoHS.

1/4

[6.35]

7/8

[21.77]

[25.40]

Ø1/8

[Ø2.5]

2-3/16

[55.56]

1-1/8

[29.03]

2-3/8

[59.94]

TRANSDUCER

POWER

SUPPLY

ZERO

SPAN

J3 J2 J1

+ PWR -

J5 J4

DWYER I STRUME TS, I C.

Phone: 219/879-8000 www.dwyer-inst.com

P.O. BOX 373 • MICHIGA CITY, I DIA A 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]

OPERATIO

Selecting Decimal Point Position

Four decimal point positions are available on the digital panel meter.

Move the jumper to correspond the desired decimal point. See Figure 1.

Figure 1

Setting Min/Max Display Value J1, J2, J3 (see Figure 2 & 3):

If:

The minimum display is ≤0 or minimum display is > 0 and the (maximum

display minimum display) ≥ 5;

Then:

J1, J2 & J3 should be all set to the top jumper (see Figure 2).

Figure 2

If:

The minimum display is > 0 and the (maximum display minimum

display) <5;

Then:

J1, J2 & J3 should all be set to the bottom jumper (see Figure 3).

Figure 3

MAI TE A CE/REPAIR

Upon final installation of the Series DPMF, no routine maintenance is

required. The Series DPMF is not field serviceable and should be

returned if repair is needed. Field repair should not be attempted and

may void warranty.

WARRA TY/RETUR

Refer to “Terms and Conditions of Sale” in our catalog and on our

website. Contact customer service to receive a Return Goods

Authorization number before shipping the product back for repair. Be

sure to include a brief description of the problem plus any additional

application notes.

DWYER I STRUME TS, I C.

Phone: 219/879-8000 www.dwyer-inst.com

P.O. BOX 373 • MICHIGA CITY, I DIA A 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]

J3 J2 J1

•

Autres manuels Dwyer Instruments Instrument de mesure

Dwyer Instruments

Dwyer Instruments A3000 series Manuel utilisateur

Dwyer Instruments

Dwyer Instruments GFM2 Series Manuel utilisateur

Dwyer Instruments

Dwyer Instruments TUF series Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments 1207A Manuel utilisateur

Dwyer Instruments

Dwyer Instruments 490W Series Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments DPG-200 Series Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments IC-VP2 Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments RPME Series Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments 477B-1 Manuel

Dwyer Instruments

Dwyer Instruments Capsuhelic 4000-0 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments TFP-GI Series Document technique

Dwyer Instruments

Dwyer Instruments 89088 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments 471B Mode d'emploi

Dwyer Instruments

Dwyer Instruments PUX2 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments SAH-22-IN Manuel utilisateur

Dwyer Instruments

Dwyer Instruments DPMP-5 Series Manuel utilisateur

Dwyer Instruments

Dwyer Instruments DigiMag DM-1200 Series Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments Love Controls LCT216 Series Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments 478A Series Manuel utilisateur

Dwyer Instruments

Dwyer Instruments StabiliSENSE RPMC Series Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments Slack-Tube 1211-8 Manuel d'exploitation et d'entretien

Dwyer Instruments

Dwyer Instruments 25 Manuel d'exploitation et d'entretien

Dwyer Instruments

Dwyer Instruments RP2 Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments DPGA Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur