Dwyer Instruments 471B Mode d'emploi

The Model 471B Digital Thermo Anemometers are versatile dual function

instruments that quickly and easily measure air velocity or volumetric flow plus air

temperature in imperial or metric units. High contrast LCD display shows both

selected readings simultaneously. Convenient backlight provides perfect visibility in

low light conditions. Light automatically shuts off after 2-1/2 minutes to prolong

battery life. Low battery warning is included. Stainless steel probe with comfortable

hand grip is etched with insertion depth marks from 0 to 8 inches and 0 to 20 cm.

Extruded aluminum housing fully protects electronics, yet is lightweight and

comfortable to hold even when taking multiple readings as part of duct traverses.

Up to 99 readings may be stored for later retrieval. An integral sliding cover protects

sensors when not in use. Items included with the 471B are 9 volt alkaline battery,

sensing probe, wrist strap and custom carrying case.

Battery Installation

The unit is shipped with a separate 9 volt alkaline battery which must be installed

before operation. Remove the two screws holding the bottom endcap in place and

remove it. Connect the battery to the enclosed battery clip, observing correct

polarity. Be careful not to trap the wires between the case or foam pad which

retains the battery. This could make it difficult to install the battery or remove it later

for replacement. Be sure the rubber gasket is properly seated in the gasket

channel and replace the endcap. Note that the endcap will only fit one way

because the holes are slightly off-center. Place the “Z” shaped wrist strap clip in

one of the screw recesses and replace the screws. Do not overtighten. Attach the

wrist strap to the clip.

When battery replacement becomes necessary, use only 9 volt alkaline type

batteries such as a Duracell®N1604, or Eveready®522 or equivalent. Zinc-

carbon types, often labeled Heavy-Duty, are not recommended because of their

shorter life and an increased potential for leakage. Alkaline batteries are a better

value because they last typically up to three times longer in this device.

Low Battery Indicator

A weak battery may cause improper operation or inaccurate measurements. A low

battery indicator ( ) is provided on the display to show when the battery needs

to be replaced. Although the unit may appear to function and read properly, the

accuracy of the readings cannot be guaranteed when the ( ) indicator is empty

of power segments. Replace the battery with a fresh one. Do not leave an

exhausted battery in the unit due to potential battery leakage.

PECIFICATION

ervice: Air velocity and temperature of clean, dry air.

Temperature Limits:

Process Air Velocity: -20 to 212°F (-29 to 100°C);

Process Temperature: -40 to 212°F (-40 to 100°C);

Ambient: 5 to 125°F (-15 to 51°C).

Display: 4.5 digit LCD.

Resolution: 0.1%, 0.1°F/°C.

Range Air Velocity: 0 to 6000 FP (0 to 30 m/s).

Accuracy Air Velocity: ±3% FS within temperature range of 40 to 90°F (4 to

32°C).

Range Volumetric Air Flow: 19,999 in selected flow units.

Range Temperature: -40 to 212°F (-40 to 100°C).

Accuracy Temperature: ±0.5°F (±0.28°C) from 32 to 122°F (0 to 50 °C); ±1.5°F

(±0.83°C) from -40°F to 32°F (-40 to 0°C) & 122 to 212°F (50 to 100°C).

Probe Length: 8˝ (203 mm) insertion.

Cable Length: 28˝ (71 cm) retracted, 6 ft (183 cm) extended.

Power Requirements: 9V alkaline battery included.

Weight: 16 oz (454 g).

Agency Approvals: CE, RoHS.

Model 471B Digital Thermo Anemometer

pecifications and Operating Instructions

Bulletin TE-471B

DWYER IN TRUMENT , INC.

Phone: 219/879-8000 www.dwyer-inst.com

P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U. .A. Fax: 219/872-9057 e-mail: info@dwyemail.com

OPERATING IN TRUCTION

Duracell® is a registered trademark of The Gillette Company

Eveready® is a registered trademark of Eveready Battery Company, Inc.

The side of the probe with dot should face the flow.

NOTICE

1.800.868.7495

QualityInstruments-Direct.ca

HOLD

Maximum

Minimum

Memory

Engineering Units

Power Management

Memory torage and Retrieval

HOLD will appear on the home screen when the HOLD button is pressed, indicating

the process reading has been frozen.

Push ENTER to see the maximum recorded reading. When viewing the maximum

recorded reading, hold ENTER for 4 seconds to clear. Push MEMORY/UP or

STORE/DOWN to cycle through parameters.

Push ENTER to see the minimum recorded reading. When viewing the minimum

recorded reading, hold ENTER for 4 seconds to clear. Push MEMORY/UP or

STORE/DOWN to cycle through parameters.

Press ENTER to see DEL. Hold ENTER for 4 seconds to clear all stored memory

locations.

Press ENTER to see current engineering units. Press MEMORY/UP or STORE/DOWN to

select another unit.

Pu sh ENTER to see current time off setting. Select 30 or 10 values indicating minutes

for power to automatically shut-off. By selecting 0, the auto shut-off is disengaged

and the unit will only turn off manually by the ON/OFF/LIGHT button.

From the home screen, push MEMORY/UP to view all previously stored values. Cycle

up or down through the stored data with the MEMORY/UP or STORE/DOWN buttons.

From the home screen, press STORE/DOWN to store data points to memory. For both

data storage and data memory retrieval, press MENU to return to the home screen.

MAINTENANCE/REPAIR

Upon final installation of the odel 471B, no routine maintenance is required. The

odel 471B is not field serviceable and should be returned if repair is needed.

Field repair should not be attempted and may void warranty.

WARRANTY/RETURN

Refer to “Terms and Conditions of Sales” in our catalog and on our website.

Contact customer service to receive a Return Goods Authorization number before

shipping the product back for repair. Be sure to include a brief description of the

problem plus any additional application notes.

Area

Press ENTER to view the current duct shape setting. for rectangular or

for circular will appear. To alter between the two, push the MEMORY/UP button or

STORE/DOWN buttons. If a circle duct shape is selected, press ENTER to see the

diameter value. If rectangle is chosen, ENTER will allow adjustment of the and

of the duct. A numeral position will blink indicating it can be adjusted with the

MEMORY/UP or STORE/DOWN buttons. Hit ENTER to store a value.

Note: In metric mode dimensions will be displayed in mm. Inches will be the value

when using imperial units.

Average

Press ENTER to view the AVG function. This function will adjust the process reading

on the home screen to report the average reading over the period of selected time.

Press MEMORY/UP or STORE/DOWN to select between 0, 10, 30, or 60 second values.

Push ENTER to store the desired value.

DWYER IN TRUMENT , INC.

Phone: 219/879-8000 www.dwyer-inst.com

P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U. .A. Fax: 219/872-9057 e-mail: info@dwyemail.com

1.800.868.7495

QualityInstruments-Direct.ca

Autres manuels Dwyer Instruments Instrument de mesure

Dwyer Instruments

Dwyer Instruments Capsuhelic 4000-0 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments CSG Manuel utilisateur

Dwyer Instruments

Dwyer Instruments 473B Manuel utilisateur

Dwyer Instruments

Dwyer Instruments THI-10 Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments DigiMag DM-1112 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments 450A-1 Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments 477AV Series Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments 660 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments Love Controls LCT216 Series Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments 477-000-FM Manuel utilisateur

Dwyer Instruments

Dwyer Instruments 460 Manuel d'utilisation et d'entretien

Dwyer Instruments

Dwyer Instruments A-705-20 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments EC2-10 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments TM2 Series Manuel utilisateur

Dwyer Instruments

Dwyer Instruments PUX2 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments Mark II 40 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments DPGA series Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments DPGAB Series Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments Magnehelic 2000-0-AF Manuel utilisateur

Dwyer Instruments

Dwyer Instruments Magnehelic 2000 Series Manuel utilisateur

Dwyer Instruments

Dwyer Instruments IEFB Series Instructions d'installation et d'utilisation

Dwyer Instruments

Dwyer Instruments SAH-22-IN Manuel utilisateur

Dwyer Instruments

Dwyer Instruments Rate-Master RMV II Series Manuel utilisateur

Dwyer Instruments

Dwyer Instruments DPG-200 Series Instructions d'installation et d'utilisation

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur