DuroStar DS4016CS Manuel utilisateur

CHAINSAW OWNER’S MANUAL

MODEL: DS4016CS

Caution: Before using our chain saw, please read this manual

carefully to understand the proper use of your unit

Keep this manual

available for reference at all times.

OWNER’S MANUAL

-1-

SAFETY FIRST

Instructions contained in warnings within this manual marked with a

concern critical points which must be taken into consideration to prevent possible

serious bodily injury, for this reason you are requested to read all the instructions

carefully and follow them without failure.

symbol

NOTES ON TYPES OF WARNINGS IN THE MANUAL

This mark indicates the instructions must be followed to prevent accidents which

could lead to serious bodily injury or death.

This mark indicates the instructions must be followed, otherwise it will lead to

mechanical failure, breakdown, or damage.

This mark indicates the hints or directions useful in the use of the product.

CONTENTS

1. Warning labels on the machine ……………………………………………… 2

2. Symbols on the macine ……………………………………………………… 3

3. Specifications ………………………………………………………………… 4

4. Safety precautions …………………………………………………………… 5

5. Installing guide bar and saw chain ………………………………………… 8

6. Fuel and chain oil …………………………………………………………… 9

7. Operating …………………………………………………………………… 11

8. Sawing ………………………………………………………………………… 13

9. Maintenance …………………………………………………………………… 15

10.Maintenance of saw chain and guide bar …………………………………… 17

11.Storage ………………………………………………………………………… 18

△

！WARNING

IMPORTANT

NOTE

12.Troubleshooting guide ……………………………………………………… 18

Owner’s Manual

- 2 -

1.WARNING LABELS ON THE MACHINE

a. Read owner's manual before operating this

machine

b. Wear head, eye, and ear protection

c. Use the chain saw with two hands

d. Warning! Kickback danger

e. Warning/Attention

Never remodel the product. We won’t warrant the machine if you use the

remodeled product or you don’t observe the proper usage written in the manual.

△

！WARNING

- 3 -

OWNER’S MANUAL

2. SYMBOLS ON THE MACHINE

For safe operation and maintenance, symbols are carved in relief on the

machine. Per these indications, please be careful not to make a mistake.

a. The port to refill the “Mixed Gasoline”.

b. The port to refill the “Chain Oil”.

c. Flipping the engine switch to “O” direction

will stop the engine.

d. Pulling out the choke knob closes the choke.

e. “MIN” direction - the oil flow decreases.

“MAX” direction - the oil flow increases.

f. The position of the Carburetor Adjustments

Owner’s Manual

- 4 -

3. SPECIFICATIONS

Name Chain Saw

Type Single cylinder, air cooled, two stroke

Model DS4016CS

Displacement（cc）40

Max. Power/Speed

（kW/r/min）

1.2/8500

Ignition System Pointless(CDI)

Carburetor Diaphragm

Start Mode Recoil Starting

Spark Plug BPMR7A 、RCJ6Y 、L6RTC

Spark Plug Gap（mm）0.6~0.7

Fuel Mixture (40:1)

Lubricating Oil FC two-stroke engine oil

Chain Oil Bar & Chain Oil

Fuel Tank Capacity（oz.）10.48

0.7

1.0

Oil Tank Capacity（oz.）7.10

297X255X245

300X240X250

Sprocket（Teeth×Pitch）6T×0.375"

Guide Bar Size 16"

Pitch 0.375"

Gauge 0.050"

0.050"

Weight (Power unit only)

（kg）

9.92 lbs.

OWNER’S MANUAL

-5-

4.SAFETY PRECAUTIONS

BEFORE USING THE MACHINE

a. Read this owners manual carefully to understand how to operate this unit

properly.

b. You should never use the product when under the influence of alcohol,

when suffering from exhaustion or lack of sleep, when suffering from

drowsiness because of having taken cold medicine, or at any other time

when a possibility exists that your judgment might be impaired or that you

might not be able to operate the machine properly and in a safe manner.

c. Never use the product under circumstances like those described below:

1). When the ground is slippery or when other conditions exist which might

make it impossible to maintain a steady posture.

2). At night, at times of heavy fog, or at any other times when your field of

vision might be limited and it would be difficult to gain a clear view of the

area.

3). During rain storms, during lighting storms, at times of strong or

gale-force winds, or at any other times when weather conditions might

make it unsafe to use this product.

d. Lack of sleep, tiredness, or physical exhaustion results in lower attention

spans, this in turn leads to accidents and injury. Limit the amount of time

of using the machine continuously to somewhere around 10 minutes per

session, and take 10~20 minutes of rest between work sessions. Try to

keep the total amount of work performed in a single day under 2 hours or

less.

WORKING EQUIPMENT AND CLOTHING

a. When using the product, you should wear proper clothing and protective

equipment as follows.

(1) Helmet

(2) Protection goggles or face protector

(3) Thick work gloves

(4) Non-slip-sole work boots

(5) Ear protectors

b. And you should carry with you.

1) Attached tools and files.

2) Properly reserved fuel and chain oil.

3) Things to notify your working area (Rope, warning signs)

4) Whistle (for collaboration or emergency)

5) Hatchet or saw (for collaboration or emergency)

Owner’s Manual

- 6 -

WARNING CONSIDERING HANDLING OF FUEL

a. The engine of this product is designed to run on a mixed

fuel which contains highly flammable gasoline. Never store

cans of fuel or refill the fuel tank in any place where here is

a boiler, stove, wood fire, electrical sparks, welding sparks,

or any other source of heat or fire which might ignite the

fuel.

b. Smoking while operating the product or refilling its fuel tank is extremely

dangerous. Always be sure to keep lit cigarettes away from the product

always.

c. When refilling the tank always turn off the engine first and take a careful

look around to make sure that there are no sparks or open flames

anywhere nearby before refueling.

d. If any fuel spillage occurs during refueling, use a dry rag to wipe up spills

before turning the engine back on again.

e. After refueling, screw the fuel cap back tightly onto the fuel tank and then

carry the product to a spot3ft. or more away from where it was refueled

before turning on the engine again.

BEFORE STARTING ENGINE

a. Check work area, the cutting object, and cutting direction. If there are

any obstacles, remove them.

b. Never start until you have a clear work area, secure footing, and a planned

retreat path from the failing tree.

c. Use caution and keep bystanders and animals out of the working area.

d. Inspect the machine and look for worn, loose, or damaged parts. Never

operate a machine that is damaged, improperly adjusted, or is not

completely and securely assembled. Make sure that the saw chain stops

moving when the throttle control trigger is released.

WHEN STARTING THE ENGINE

a. Always hold the machine firmly with both hands when the engine is running.

Use a firm grip with thumb and fingers encircling the handles.

b. Keep all parts of your body away from the machine when the engine is

running.

c. Before starting the engine, make sure the saw chain is not touching

anything.

OWNER’S MANUAL

-7-

WHEN OPERATING THE ENGINE

a. Keep the handles dry, clean, and free of oil or fuel mixture.

b. Never touch the muffler, spark plug, or other metal parts of the engine while

the engine is in operation or immediately after stopping the engine. Doing

so could result in serious burns or electrical shock.

c. Use extreme caution when cutting small size brush and saplings because

slender material may catch in the saw chain and be whipped toward you or

pull you off balance.

d. When cutting a limb that is under tension, be alert for spring back so that

you will not be struck when the tension in the wood fibers is released.

e. Check the tree for dead branches that could fall during the felling

operation.

f. Always shut off the engine before setting it down.

a. Kickback may occur when the nose or tip of the guide bar touches an

object, or when the wood closes in and pinches the saw chain in the cut.

Tip contact in some cases may cause a lightning fast reverse reaction,

kicking the guide bar up and back towards the operator. Either of these

reactions may cause you to lose control of saw which could result in

serious personal injury.

b. Do not rely exclusively on the safety devices built into your saw. As a chain

saw user you should take several steps to keep cutting jobs free from

accident or injury.

1)With a basic understanding of kickback, you can reduce or eliminate

the element of surprise. Sudden surprise contributes to accidents.

2)Keep a good grip on the saw with both hands, the right hand on the

rear handle, and the left hand on the front handle, when the engine is

running. Use a firm grip with thumbs and fingers encircling the chain

saw handles. A firm grip will help you reduce kickback and maintain

control of the saw.

3)Make certain that the area in which you are cutting is free from

obstructions. Don not let the nose of the guide bar contact a log,

branch, or any other obstructions which could be hit while you are

operating the saw.

4)Cut at high engine speeds.

5)Do not overreach or cut above shoulder height.

△

！

WARNING

OWNER’S MANUAL

-8-

5.INSTALLING GUIDE BAR AND SAW CHAIN

A standard saw unit package contains the items as

illustrated

(1) power unit

(2) Bar protector

(3) Guide bar

(4) Saw chain

(5) Plug wrench

(6) Hexagon wrench

Open the box and install the guide bar and the saw

chain on the power unit as follows:

a. Loosen the nuts and remove the chain cover.

b. Gear the chain to the sprocket, while fitting the saw

chain around the guide bar, mount the guide bar to

the power unit. Adjust the position of chain tension

nut on the chain cover to the lower hole of the

guide bar.

(1) Tensioner nut

(2) Chain cover

Pay attention to the correct direction of the saw chain

a. Mount the bar to the studs of the power unit, and

fit the saw chain around the guide bar, adjust the

position of chain tensioner nut on the chain.

b. Tighten the tensioner screw.

(Style 1 or Style 2）

(1) Tighten

(2) Loosen

(3) Tensioner screw

A new chain will expend its length in the beginning of use. Check and readjust

the tension frequency as a loose chain can easily derail or cause rapid wear of

itself and the guide bar.

NOTE

Style 1

（3

）

（1）

（2）

Style 2

Table des matières

Autres manuels DuroStar Tronçonneuse

DuroStar

DuroStar DS5018CS Manuel utilisateur

Manuels Tronçonneuse populaires d'autres marques

Bushranger

Bushranger CS4210 Manuel utilisateur

Husqvarna

Husqvarna 136, 141 Manuel utilisateur

Echo

Echo CS-330EVL Manuel utilisateur

HART

HART HLCS01 Manuel utilisateur

Homelite

Homelite UH10817 Manuel utilisateur

Westfalia

Westfalia SCS 725 Manuel utilisateur

Nakayama

Nakayama EC2050 Manuel utilisateur

The Handy

The Handy THPCS16 Manuel utilisateur

McCulloch

McCulloch PRO MAC 54 Manuel

Husqvarna

Husqvarna 359 E-tech Manuel utilisateur

Craftsman

Craftsman 358.352162 Manuel utilisateur

Craftsman

Craftsman 358.350270 Manuel utilisateur

Craftsman

Craftsman 358.351610 Manuel utilisateur

Echo

Echo CS-8001(6digits)(36) Mode d’emploi

Poulan Pro

Poulan Pro 545047544 Manuel utilisateur

Ryobi

Ryobi RY3714VNM Manuel utilisateur

Homelite

Homelite Ranger UT10926 Manuel utilisateur

McCulloch

McCulloch TimberBear TM502 Manuel utilisateur