DUROMAX XP702HP Manuel utilisateur
This manual provides information regarding the operation and maintenance of these products. We have
made every effort to ensure the accuracy of the information in this manual. We reserve the right to
change this product at any time without prior notice.
Please keep this manual available to all users during the entire life of the gasoline water pump.
CONTENTS
1. General Safeguards ................................................. 4
2. Location of Component Parts ................................... 6
3. Operation before Starting Up .................................... 7
4. Starting of Engine ..................................................... 12
5. Use in High Altitude .................................................. 14
6. Operation of Water Pump .......................................... 15
7. Shutting Down the Engine ......................................... 16
8. Maintenance ............................................................. 17
9. Transportation and Storage ...................................... 22
10. Troubleshooting ........................................................ 24
11. Specifications ............................................................. 25
3
12. Parts Diagrams .......................................................... 27
13. Warranty .................................................................... 31
Ⅰ. General Safeguards
Safety Precautions
Before starting the engine, perform inspections according to
the procedures described on pre-operation inspections
to avoid accidents and damage to your machine.
For safety, never attempt using this GEP (gasoline
engine powered) water pump to deliver inflammable or
corrosive liquids (such as gasoline and acids). Likewise,
corrosive mediums, seawater, chemical solvents, alkaline
liquids (such as used gasoline, liquor and honey) should be
avoided.
Place the water pump on a solid, level position surface to
avoid tilting or turnover that may give rise to spilling of fuel.
To prevent fire hazards, keep the pump well ventilated
during operation and maintain a distance of at least l meter
between the machine and the wall or other machines.
Keep away from inflammable substances.
Do not allow children and pets to enter the working area as
this may increase the chance of their getting burned by hot
surfaces of the operating parts.
Know how to stop the water pump quickly how to operate
the controls. Do not use the pump against the prescribed
operating rules.
Please read this operation manual to have a
thorough understanding of the content there
before use the product. Failure to do so may
lead to personal injury or mechanical damage.
4
WARNING： Safety Precautions
The gasoline fuel is highly inflammable and may explode
under certain conditions.
Fuel with the engine shut down and in a well-ventilated
environment. No smoking is allowed and no open fire or sparks
allowed to exist in areas where fueling is carried out or the fuel is
stored.
Do not allow the fuel to overflow the fuel tank. Be sure to
recap the tank and tighten it after refueling.
When fueling, take care not to spill the gasoline about as the
gasoline vapor may easily get ignited to cause a fire hazard. Be
sure to remove the spilled gasoline as by wiping before starting
the engine.
Do not run the engine indoors or in a poorly ventilated space
as the exhaust gas produced by the running engine contains toxic
carbon monoxide that may cause the loss of personal
consciousness or even death.
5
Ⅱ. Location of Component Parts
Discharge
Frame
Fuel Cap
Muffler
Air Cleaner
Controls
Recoil Start
Engine Switch
Oil Fill
Fill Cap
Discharge
Suction
Drain Cap
Oil Drain Bolt
Low Oil
Sensor
6
Ⅲ.Operation before Starting Up
1. Connecting the water inlet
Connect the water inlet with a commercially available
hose, connector and fastener clip. The inlet hose must be a
continuous non-foldable structure with a length not more than
required and should be placed near to the source of water so as
to achieve the pump should be fitted to the end of the hose with
the hose connector as shown in the figure below.
CAUTION: Before pumping water, attach the filter to the end of
the hose to filter out foreign matters in the water, the presence
of which may cause clogging and damage to the wane wheel.
NOTE: The hose connector and fastener clip should be securely
fastened to prevent air leaks and reduction in suction power. A
loose hose will reduce the pump performance and self-suction
capacity.
2. Connecting the water outlet
Connect the water outlet with a commercially available hose,
hose connector and fastener clip. Large diameter hoses are the
most effective while small ones will increase the flow resistance
and reduce the output power of the pump.
7
NOTE:
Be sure to the fastener clip is securely fastened to prevent
the outlet hose from coming off under high water pressure.
3.Checking the oil level
CAUTION:
•
The oil is one of the major factors affecting engine
performance and life. Do not use dirty oil or vegetable oil.
•
Be sure to check the oil level with the engine shut down and
placed on a level surface.
•
Please use the SE15-40, 4-stroke engine oil as
recommended.
•
Please use the type of oil with a proper viscosity according
to the local average temperature.
•
Oil shortage alarm system (OSAS) (installation position)
The OSAS is designed to avoid damage of the engine due
to the shortage of oil in the crankcase. The system will
automatically shut down the engine just before the
crankcase oil level drops down to the minimum line of
safety (with the engine switch staying in the ON position).
•
If the engine is shut down and cannot be started again,
check the oil level before initiating further troubleshooting
procedures. Remove the oil dipstick and wipe it dry.
Insert the dipstick into the oil filler but not screw it in.
Replenish the crankcase with the recommended type of oil
until the oil level comes up to the upper most position of the
refilled if the existing oil level is found too low.
8
CAUTION:
·Running the engine at a low oil level will cause damage to it.
4. Checking the fuel level
Uncap the fuel tank and check the fuel level. Pouring gasoline if
the fuel level is found too low.
Please use the type of gasoline recommended by the Dealer. Do
not use a mixture of gasoline and oil or dirty gasoline to prevent
dirt, dust or water from entering the fuel tank.
CAUTION:
•The gasoline fuel is highly inflammable and may explode
undercertain conditions.
•Do the fueling with the engine shut down and in a well-
ventilated environment. No smoking is allowed and no open
fire or sparks allowed to exist in areas where fueling is carried
out or the fuel is stored.
•Do not allow the fuel to overflow the fuel tank. Be sure to recap
the tank and tighten it after refueling.
9
·When fueling, take care not to spill the gasoline about as
the gasoline vapor may easily get ignited to cause a fire
hazard.
·Be sure to remove the spilled gasoline as by wiping before
starting the engine.
·Avoid frequent or extensive exposure of the skin to gasoline or
breathing in the gasoline vapor. Keep the gasoline out of the
reach of children.
·Fuel tank capacity: 1.0 gallons (US. 3.6 liters)
5. Checking the air cleaner
filter element
Screw the wing nut and remove
the washer and cleaner cover.
Check the filter element to see if
it is too dirty and clean it if
necessary.
CAUTION:
Do not run the engine without the
air cleaner as this may quicken
engine wear if dirt or dust is
sucked into the engine through the
carburetor.
10
Table des matières
Autres manuels DUROMAX Pompe à eau
Manuels Pompe à eau populaires d'autres marques
Sykes AmeriPumps
Sykes AmeriPumps GP100M Guide de dépannage
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Manuel utilisateur
Franklin Electric
Franklin Electric IPS Manuel utilisateur
Xylem
Xylem e-1532 Series Manuel utilisateur
Milton Roy
Milton Roy PRIMEROYAL Manuel utilisateur
STA-RITE
STA-RITE ST33APP Manuel utilisateur