DUROMAX XP652WP Manuel utilisateur
1
Gasoline Water Pump
Owner’s Manual
Max Tool Customer Service
Monday -Thursday 6am to 7pm, Friday - Saturday 6am to 3pm. PST
Product Support (Product: information, application & warranty questions)
or call 1-800-629-3325 (option 3)
Monday -Thursday 6am to 7pm, Friday - Saturday 6am to 3pm. PST
2
This manual provides information regarding the operation and maintenance of these products. We have
made every effort to ensure the accuracy of the information in this manual. We reserve the right to
change this product at any time without prior notice.
Please keep this manual available to all users during the entire life of the gasoline water pump.
CONTENTS
ĉ. General Safeguards ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ1
Ċ. Location of Component Parts ĂĂĂĂĂĂĂĂĂĂĂĂĂ3
ċ. Operation before Starting Up ĂĂĂĂĂĂĂĂĂĂĂĂĂ4
Č. Starting of Engine ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ9
č
. Use in Highland Areas
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ11
Ď. Operation of Water Pump ĂĂĂĂĂĂĂĂĂĂĂĂĂĂ12
ď. Shutting Down the Engine ĂĂĂĂĂĂĂĂĂĂĂĂĂĂ13
Đ. Maintenance ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ14
đ. Transportation and Storage ĂĂĂĂĂĂĂĂĂĂĂĂĂĂ19
Ē. Troubleshooting
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
21
ē. Specifications ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ23
3
ĉ. General Safeguards
Safety Precautions
Before starting the engine, perform inspections according to the
procedures described on pre-
operation inspections to avoid
accidents and damage to your machine.
For safety, never attempt using this GEP (gasoline engine
powered)
water pump to deliver inflammable or corrosive liquids
(such as gasoline and acids). Likewise, corrosive mediums,
seawater, chemical solvents, alkaline liquids (such as used gasoline,
liquor and honey) should be avoided.
Place the water pump on a solid, l
evel position surface to avoid
tilting or turnover that may give rise to spilling of fuel.
To prevent fire hazards, keep the pump well ventilated during
operation and maintain a distance of at least l meter between the
machine and the wall or other machine
s. Keep away from
inflammable substances.
Do not allow children and pets to enter the working area as this
may increase the chance of their getting burned by hot surfaces of
the operating parts.
Know how to stop the water pump quickly how to operate the
co
ntrols. Do not use the pump against the prescribed operating
rules.
WARNING˖Safety Precautions
The gasoline fuel is highly inflammable and may explode under
certain conditions.
Do the fueling with the engine shut down and in a well-
ventilated
Please read this operation manual to have a
thorough understanding of the content there
before use the product. Failure to do so may
lead to personal injury or mechanical damage.
4
environment. No smoking is allowed and no open fire or sparks
allowed to exist in areas where fueling is carried out or the fuel is
stored.
Do not allow the fuel to overflow the fuel tank. Be sure to recap
the tank and tighten it after refueling.
When fueling, take care not to spill the gasoline about as the
gasoline vapor may easily get ignited to cause a fire hazard. Be sure
to remove the spilled gasoline as by wiping before starting the
engine.
Do not run the engine indoors or in a poorly ventilated space as
the exhaust gas produced by the running engine contains toxic
carbon monoxide that may cause the loss of personal
consciousness or even death.
5
Ċ. Location of Component Parts
6
ċ. Operation before Starting Up
1. Connecting the water inlet
Connect the
water inlet with a commercially available hose,
connector and fastener clip. The inlet hose must be a continuous
non-
foldable structure with a length not more than required and
should be placed near to the source of water so as to achieve the
pump should be fitted to the end of the hose with the hose connector
as shown in the figure below.
CAUTION: Before pumping water, attach the filter to the end of the
hose to filter out foreign matters in the water, the presence of which
may cause clogging and damage to the wane wheel.
NOTE: The hose connector and fastener clip should be securely
fastened to prevent air leaks and reduction in suction power. A loose
hose will reduce the pump performance and self
-suction capacity.
2. Connecting the water outlet
Connect the water outlet with a commercially available hose, hose
connector and fastener clip. Large diameter hoses are the most
effective while small ones will increase the flow resistance and
reduce the output power of the pump.
7
NOTE:
Be sure to the fastener clip is securely fastened to prevent
the
outlet hose from coming off under high water pressure.
3.Checking the oil level
CAUTION:
g
The oil is one of the major factors affecting engine performance
and life. Do not use dirty oil or vegetable oil.
g
Be sure to check the oil level with the engine shut down and
placed on a level surface.
Please use the SE15-40, 4-stroke engine oil as recommended.
Please use the type of oil with a proper viscosity according to the
local average temperature.
Oil shortage alarm system (OSAS) (installation position)
The OSAS is designed to avoid damage of the engine due to the
shortage of oil in the crankcase. The system will automatically shut
down the engine just before the crankcase oil level drops down to
th
e minimum line of safety (with the engine switch staying in the ON
position).
If the engine is shut down and cannot be started again, check the
oil level before initiating further troubleshooting procedures.
Remove the oil dipstick and wipe it dry.
Insert
the dipstick into the oil filler but not screw it in.
Replenish the crankcase with the recommended type of oil until
8
the oil level comes up to the upper most position of the refilled if the
existing oil level is found too low.
CAUTON:
gRunning the engine at a low oil level will cause damage to it.
4. Checking the fuel level
Uncap the fuel tank and check the fuel level. Pouring gasoline if
the fuel level is found too low.
Please use the type of gasoline recommended by the Dealer
(Using the low lead content or lead-
free gasoline type is good for
minimizing carbon deposits inside the combustion chamber).
Do not use a mixture of gasoline and oil or dirty gasoline to
prevent dirt, dust or water from entering the fuel tank.
CAUTION:
gThe
gasoline fuel is highly inflammable and may explode under
certain conditions.
gDo the fueling with the engine shut down and in a well-
ventilated
environment. No smoking is allowed and no open fire or sparks
allowed to exist in areas where fueling is carried out or
the fuel is
stored.
g
Do not allow the fuel to overflow the fuel tank. Be sure to recap
the tank and tighten it after refueling.
9
g
When fueling, take care not to spill the gasoline about as the
gasoline vapor may easily get ignited to cause a fire hazard
. Be sure
to remove the spilled gasoline as by wiping before starting the
engine.
g
Avoid frequent or extensive exposure of the skin to gasoline or
breathing in the gasoline vapor. Keep the gasoline out of the reach of
children.
gFuel tank capacity: 1.0 gallons (US. 3.6 liters)
5. Checking the air cleaner filter element
Screw the wing nut and remove the washer and cleaner cover.
Check the filter element to see if it is too dirty and clean it if
necessary.
CAUTION:
Do not run the eng
ine without the air cleaner as this may quicken
engine wear if dirt or dust is sucked into the engine through the
carburetor.
10
6. Checking and filling the pump with cooling water
The pump must be filled with water before it is put to operation.
CAUTION:
g
Do not attempt running the pump without cooling water or the
pump will get overheated. Extensive running without cooling water
may also damage the air tightness of the pump. If the pump is found
running dry, stop the engine and pouring in water wh
en it cools
down.
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels DUROMAX Pompe à eau
Manuels Pompe à eau populaires d'autres marques
Sykes AmeriPumps
Sykes AmeriPumps GP100M Guide de dépannage
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Manuel utilisateur
Franklin Electric
Franklin Electric IPS Manuel utilisateur
Xylem
Xylem e-1532 Series Manuel utilisateur
Milton Roy
Milton Roy PRIMEROYAL Manuel utilisateur
STA-RITE
STA-RITE ST33APP Manuel utilisateur