DURKOPP ADLER 911 Guide produit

911

CNC-controlled sewing unit with large

sewing area

Operating Instructions

Installation Instructions

Service Instructions

Postfach 17 03 51, D-33703 Bielefeld Potsdamer Straße 190, D-33719 Bielefeld

Telefon +49 (0) 5 21/ 59 25-00 Telefax +49 (0) 5 21/ 9 25 24 35 www.duerkopp-adler.com

Ausgabe / Edition: Änderungsindex Teile-Nr./Part.-No.:

08/2010 Rev. index: 00.0 Printed in Federal Republic of Germany 0791 911001

Property of Dürkopp Adler AG and copyrighted. Reproduction or publication of the content in any

manner, even in extracts, without prior written permission of Dürkopp Adler AG, is prohibited.

Foreword

This instruction manual is intended to help the user to become familiar

with the machine and take advantage of its application possibilities in

accordance with the recommendations.

The instruction manual contains important information on how to

operate the machine securely, properly and economically. Observation

of the instructions eliminates danger, reduces costs for repair and

down-times, and increases the reliability and life of the machine.

The instruction manual is intended to complement existing national

accident prevention and environment protection regulations.

The instruction manual must always be available at the machine/sewing

unit.

The instruction manual must be read and applied by any person that is

authorized to work on the machine/sewing unit. This means:

–Operation, including equipping, troubleshooting during the work

cycle, removing of fabric waste,

–Service (maintenance, inspection, repair) and/or

–Transport.

The user also has to assure that only authorized personnel work on the

machine.

The user is obliged to check the machine at least once per shift for

apparent damages and to immediatly report any changes (including the

performance in service), which impair the safety.

The user company must ensure that the machine is only operated in

perfect working order.

Never remove or disable any safety devices.

If safety devices need to be removed for equipping, repairing or

maintaining, the safety devices must be remounted directly after

completion of the maintenance and repair work.

Unauthorized modification of the machine rules out liability of the

manufacturer for damage resulting from this.

Observe all safety and danger recommendations on the machine/unit!

The yellow-and-black striped surfaces designate permanend danger

areas, eg danger of squashing, cutting, shearing or collision.

Besides the recommendations in this instruction manual also observe

the general safety and accident prevention regulations!

General safety instructions

The non-observance of the following safety instructions can cause

bodily injuries or damages to the machine.

1. The machine must only be commissioned in full knowledge of the

instruction book and operated by persons with appropriate training.

2. Before putting into service also read the safety rules and

instructions of the motor supplier.

3. The machine must be used only for the purpose intended. Use of

the machine without the safety devices is not permitted. Observe all

the relevant safety regulations.

4. When gauge parts are exchanged (e.g. needle, presser foot, needle

plate, feed dog and bobbin) when threading, when the workplace is

left, and during service work, the machine must be disconnected

from the mains by switching off the master switch or disconnecting

the mains plug.

5. Daily servicing work must be carried out only by appropriately

trained persons.

6. Repairs, conversion and special maintenance work must only be

carried out by technicians or persons with appropriate training.

7. For service or repair work on pneumatic systems, disconnect the

machine from the compressed air supply system (max. 7-10 bar).

Before disconnecting, reduce the pressure of the maintenance unit.

Exceptions to this are only adjustments and functions checks made

by appropriately trained technicians.

8. Work on the electrical equipment must be carried out only by

electricians or appropriately trained persons.

9. Work on parts and systems under electric current is not permitted,

except as specified in regulations DIN VDE 0105.

10. Conversion or changes to the machine must be authorized by us

and made only in adherence to all safety regulations.

11. For repairs, only replacement parts approved by us must be used.

12. Commissioning of the sewing head is prohibited until such time as

the entire sewing unit is found to comply with EC directives.

13. The line cord should be equipped with a country-specific mains

plug. This work must be carried out by appropriately trained

technicians (see paragraph 8).

It is absolutely necessary to respect the safety

instructions marked by these signs.

Danger of bodily injuries !

Please note also the general safety instructions.

Contents Page:

Part 2: Installation Instructions 911 – Original Instructions

1. Scope of delivery .............................................. 3

2. General .................................................... 3

3. Installing the sewing unit

3.1 Transport.................................................... 4

3.2 Removingthesecuritydevices ...................................... 5

3.3 Settingtheworkingheight......................................... 6

3.3.1 Sewingunitswithrollers .......................................... 6

3.3.2 Sewing units without rollers ........................................ 7

3.4 Fittingthefootpedal............................................. 8

4. Attaching the machine parts removed for shipping

4.1 Threadreelholder.............................................. 9

5. Electrical connection

5.1 Connectingtothemains .......................................... 10

5.2 Checking the nominal voltage ....................................... 10

5.3 Directionofrotationofthesewingmotor ................................ 10

6. Pneumatic connection .......................................... 11

7. Oil lubrication ................................................ 12

8. Putting into operation ........................................... 13

1. Scope of delivery

CNC-controlled sewing unit/pattern stitcher (max. sewing field

size 300 x 200 mm) based on the machine head class 867 and a

control unit DAC III with a special software.

Double-lockstitch machine equipped with: automatic sewing foot and

clamp lifting, sewing stroke adjustment.

Thread trimmer, needle thread monitoring, thread pulling device and

multiple thread tension device, made of the following:

–3Compressed air maintenance unit with compressed air gun 1

–2Stand (adjustable in height)

–4Thread stand

–Tools and small parts in the accessories.

–Additional equipment (optional)

2. General

ATTENTION!

The sewing unit must be set up by trained specialist personnel.

All work on the electrical equipment of this special sewing unit may

only be carried out by qualified electricians or other appropriately

trained persons.

The mains plug must be pulled out.

The enclosed operating instructions of the motor manufacturer have

to be observed without fail.

3. Installing the sewing unit

3.1 Transport

Transport the sewing unit using a lifting cart or a forklift, or its own

castors if available.

ATTENTION!

Before putting the sewing unit into operation, screw out the height

adjustable legs 1 until good stability is reached.

Lifting the sewing unit

–Use only a lifting cart or a forklift.

Moving the sewing unit

–In order to move the sewing unit via its own castors, loosen the

nuts 3 of the legs 1 and screw in the legs.

–After the transport, screw out the legs 1 until the castors 2 lift off.

–Fasten the nuts 3.

132

3.2 Removing the security devices

Before installing the sewing unit all three securing devices have to be

removed.

If the sewing unit has to be transported to another place, please

remount the securing devices again.

3.3 Setting the working height

3.3.1 Sewing units with rollers

The working height can be set between 760 mm and 910 mm

(measured up to the upper edge of the table top).

Caution: Risk of injury!

Do not lift the sewing unit using the table top.

Put a lifting cart or a forklift underneath the sewing unit before

loosening the clamping screw.

Set the height of the sewing unit by equally pulling the tubular feet of

the stand.

–Loosen screws 1 (8x).

–Set the table top to the desired height to be level.

To avoid a tilting, pull out / push in the tubular feet equally on both

sides.

–Fasten screws 1.

Autres manuels pour 911

Table des matières

Autres manuels DURKOPP ADLER Machine à coudre

DURKOPP ADLER

DURKOPP ADLER 512-211-01 Mode d'emploi

DURKOPP ADLER

DURKOPP ADLER 275 Series Mode d’emploi

DURKOPP ADLER

DURKOPP ADLER 827 Mode d'emploi

DURKOPP ADLER

DURKOPP ADLER 869-M Premium Mode d'emploi

DURKOPP ADLER

DURKOPP ADLER 767 - Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 805 Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER H867 Manuel d'utilisation

DURKOPP ADLER

DURKOPP ADLER 967 Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 806 Mode d'emploi

DURKOPP ADLER

DURKOPP ADLER DAC BASIC - CLASS 271 PART II V 12-2010 Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 805 Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 838 Mode d'emploi

DURKOPP ADLER

DURKOPP ADLER 669 ECO Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 745-34 - Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 838 Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 8700 Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 581 Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 580 - Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 512/532 Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 867-M Premium Manuel d'utilisation original

DURKOPP ADLER

DURKOPP ADLER 745-35-10 F Mode d'emploi

DURKOPP ADLER

DURKOPP ADLER 838 Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 540 - 100 Manuel utilisateur

DURKOPP ADLER

DURKOPP ADLER 531 - Manuel utilisateur

Manuels Machine à coudre populaires d'autres marques

Riccar

Riccar RL634DE Manuel utilisateur

Singer

Singer 2517 Manuel utilisateur

Pfaff

Pfaff 3307-1 SERIES Manuel utilisateur

Janome

Janome Quilt Maker Pro 18 VERSA Manuel utilisateur

Siruba

Siruba C007JP Manuel utilisateur

Husqvarna Viking

Husqvarna Viking Designer SE Manuel utilisateur

Singer

Singer 148-5 Manuel utilisateur

IKEA

IKEA SY Manuel utilisateur

Pfaff

Pfaff 571 Manuel utilisateur

Singer

Singer 15-91 Manuel utilisateur

Brother

Brother BB370 Manuel utilisateur

Pegasus

Pegasus WT100 Series Manuel utilisateur

Reliable

Reliable 7100DB Manuel utilisateur

Pfaff

Pfaff 937 Manuel utilisateur

Singer

Singer 6038 Manuel utilisateur

Singer

Singer 413K Manuel utilisateur

Pfaff

Pfaff 1471 E1 Manuel utilisateur

Kenmore

Kenmore 16677 - Serger Sewing Machine Manuel utilisateur