Dukane 8979WUA Manuel utilisateur
1
ENGLISH
Projector
8975WUA/8979WUA
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely
and utilize well the product.
WARNING Ź%HIRUHXVLQJWKLVSURGXFWEHVXUHWRUHDGDOOPDQXDOVIRUWKLV
product. After reading them, store them in a safe place for future reference.
Ź+HHGDOOWKHZDUQLQJVDQGFDXWLRQVLQWKHPDQXDOVRURQWKHSURGXFW
Ź)ROORZDOOWKHLQVWUXFWLRQVLQWKHPDQXDOVRURQWKHSURGXFW
)LUVWRIDOO ............................................ 2
Entries and graphical symbols explanation ......2
Important safety instruction ..............................2
Regulatory notices .............................. 3
About Electro-Magnetic Interference ................3
About Waste Electrical and Electronic Equipment
... 4
Contents of package........................... 4
Preparing for the remote control ......... 5
Arrangement ....................................... 6
Connecting with your devices ............. 7
)DVWHQLQJWKHDGDSWHUFRYHU ............... 8
Connecting power supply ................... 8
Turning on the power .......................... 9
Adjusting the projector's elevator ..... 10
Adjusting the lens position ................ 10
Displaying the picture ....................... 11
Turning off the power ........................ 12
Replacing the lamp ........................... 13
&OHDQLQJDQGUHSODFLQJWKHDLU¿OWHU
.. 15
Using the CD manual ....................... 17
6SHFL¿FDWLRQV ................................... 18
Troubleshooting
- Warranty and after-service ........... 20
Contents
NOTE
In this manual, unless any comments are accompanied, “the manuals”
means all the documents provided with this product, and “the product” means this
projector and all the accessories came with the projector.
430-8975WUA-8979WUA-Concise-00
2
First of all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and the product
as follows, for safety purpose. Please know their meanings beforehand, and heed them.
Important safety instruction
7KHIROORZLQJVDUHLPSRUWDQWLQVWUXFWLRQVIRUVDIHO\XVLQJWKHSURGXFW%HVXUHWR
follow them always when handling the product. The manufacturer assumes no
responsibility for any damage caused by mishandling that is beyond normal usage
GH¿QHGLQWKHVHPDQXDOVRIWKLVSURMHFWRU
WARNING
This entry warns of a risk of serious personal injury or even death.
CAUTION This entry warns of a risk of personal injury or physical damage.
NOTICE This entry notices of fear of causing trouble.
WARNING ŹNever use the product in or after an abnormality (ex. giving
off smoke, smelling strange, took a liquid or an object inside, broken, etc.) If an
abnormality should occur, unplug the projector urgently.
ŹSituate the product away from children and pets.
Ź.HHSVPDOOSDUWVDZD\IURPFKLOGUHQDQGSHWV,IVZDOORZHGFRQVXOWD
physician immediately for emergency treatment.
ŹDo not use the product when there is fear of a thunderbolt.
ŹUnplug the projector from the power outlet if the projector is not used for the
time being.
Ź
Do not connect the projector to a power supply while no lens unit is attached to it.
ŹDo not open or remove any portion of the product, unless the manuals direct
LW)RULQWHUQDOPDLQWHQDQFHOHDYHLWWR\RXUGHDOHURUWKHLUVHUYLFHSHUVRQQHO
Ź8VHRQO\WKHDFFHVVRULHVVSHFL¿HGRUUHFRPPHQGHGE\WKHPDQXIDFWXUHU
ŹDo not modify the projector or accessories.
ŹDo not let any things or any liquids enter to the inside of the product.
ŹDo not wet the product.
Ź
Do not place the projector where any oils, such as cooking or machine oil, are used.
Oil may harm the product, resulting in malfunction, or falling from the mounted position.
ŹDo not apply a shock or pressure to this product.
- Do not place the product on an unstable place such as the uneven surface or
the leaned table.
- Do not place the product unstably. Place the projector so that it does not
protrude from the surface where the projector is placed on.
- Place your hands on the grip on the bottom of the projector when carrying the
projector.
- Remove all the attachments including the power cord and cables, from the
projector when carrying the projector.
Ź
Do not look into the lens and the openings on the projector, while the lamp is on.
Ź
Do not approach the lamp cover and the exhaust vents, while the projection lamp
is on. Also after the lamp goes out, do not approach them for a while, since too hot.
3
ENGLISH
Regulatory notices
About Electro-Magnetic Interference
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
This product may cause interference if used in residential areas. Such use must
be avoided unless the user takes special measures to reduce electromagnetic
emissions to prevent interference to the reception of radio and television
broadcasts.
In Canada
&$1,&(6$10%$
In the US and places where the FCC regulations are applicable
7KLVGHYLFHFRPSOLHVZLWKSDUWRIWKH)&&5XOHV2SHUDWLRQLVVXEMHFW
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
&ODVV$GLJLWDOGHYLFHSXUVXDQWWR3DUWRIWKH)&&5XOHV
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to case harmful interference in which case the user will be required to
correct the interference at his own expense.
INSTRUCTIONS TO USERS: Some cables have to be used with the core set.
8VHWKHDFFHVVRU\FDEOHRUDGHVLJQDWHGW\SHFDEOHIRUWKHFRQQHFWLRQ)RUFDEOHV
that have a core only at one end, connect the core to the projector.
CAUTION: &KDQJHVRUPRGL¿FDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\
responsible for compliance could void the user’s authority to operate the
equipment.
4
Contents of package
Your projector should come with the items
shown below. Check that all the items are
included. Require of your dealer immediately if
any items are missing.
(1) Remote control with two AA batteries
(2) Power cord
(3) Computer cable
(4) Lens cover
Information sheet
(6) Security label
(7) See Dukane web site
(8) Adapter cover
NOTE.HHSWKHRULJLQDOSDFNLQJPDWHULDOVIRUIXWXUHUHVKLSPHQW%HVXUH
to use the original packing materials when moving the projector. Use special
caution for the lens.
7KHSURMHFWRUPD\PDNHDUDWWOLQJVRXQGZKHQWLOWHGPRYHGRUVKDNHQVLQFH
DÀDSWRFRQWUROWKHDLUÀRZLQVLGHRIWKHSURMHFWRUKDVPRYHG%HDZDUHWKDW
this is not a failure or malfunction.
(5)
(6)
(2)
(3)
(4)
(1)
About Waste Electrical and Electronic Equipment
The mark is in compliance with the Waste Electrical and Electronic
Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment
including any spent or discarded batteries or accumulators as unsorted
municipal waste, but use the return and collection systems available.
If the batteries or accumulators included with this equipment, display
the chemical symbol Hg, Cd, or Pb, then it means that the battery has a
heavy metal content of more than 0.0005% Mercury or more than, 0.002%
Cadmium, or more than 0.004% Lead.
Regulatory notices (continued)
(7)
WARNING Ź.HHSVPDOOSDUWVDZD\IURPFKLOGUHQDQGSHWV7DNHFDUH
not to put in the mouth. If swallowed, consult a physician immediately for
emergency treatment.
(8)
www.
5
ENGLISH
Preparing for the remote control
Please insert the batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not use the
remote control for long period, remove the batteries from the remote control and
store them in a safe place.
1. Holding the hook part of the battery
cover, remove it.
2. Align and insert the two AA batteries
(HITACHI MAXELL, Part No.LR6 or
R6P) according to their plus and minus
terminals as indicated in the remote
control.
3. Replace the battery cover in the direction of the arrow
and snap it back into place.
WARNING ŹAlways handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
ZKLFKFRXOGUHVXOWLQ¿UHLQMXU\DQGRUSROOXWLRQRIWKHVXUURXQGLQJHQYLURQPHQW
When replacing the batteries, replace both of the batteries with new batteries
of the same type. Do not use a new battery with a used battery.
%HVXUHWRXVHRQO\WKHEDWWHULHVVSHFL¿HG'RQRWXVHEDWWHULHVRIGLIIHUHQW
types at the same time. Do not mix a new battery with used one.
Make sure the plus and minus terminals are correctly aligned when loading a battery.
.HHSDEDWWHU\DZD\IURPFKLOGUHQDQGSHWV
Do not recharge, short circuit, solder or disassemble a battery.
'RQRWSODFHDEDWWHU\LQD¿UHRUZDWHU.HHSEDWWHULHVLQDGDUNFRRODQGGU\SODFH
If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
Obey the local laws on disposing the battery.
2
13
6
WARNING ŹInstall the projector where you can access the power outlet
easily.
ŹInstall the projector in a stable horizontal position.
'RQRWXVHDQ\PRXQWLQJDFFHVVRULHVH[FHSWWKHDFFHVVRULHVVSHFL¿HGE\WKH
manufacturer. Read and keep the manuals of the accessories used.
)RUVSHFLDOLQVWDOODWLRQVXFKDVFHLOLQJPRXQWLQJEHVXUHWRFRQVXOW\RXU
GHDOHUEHIRUHKDQG6SHFL¿FPRXQWLQJDFFHVVRULHVDQGVHUYLFHVPD\EH
required.
'RQRWSXWWKHSURMHFWRURQLWVVLGHIURQWRUUHDUSRVLWLRQ
'RQRWDWWDFKQRUSODFHDQ\WKLQJRQWKHSURMHFWRUXQOHVVRWKHUZLVHVSHFL¿HG
in the manual.
Ź'RQRWLQVWDOOWKHSURMHFWRUQHDUWKHUPDOO\FRQGXFWLYHRUÀDPPDEOHWKLQJV
ŹDo not place the projector where any oils, such as cooking or machine oil, are
used.
ŹDo not place the projector in a place where it may get wet.
CAUTION Ź3ODFHWKHSURMHFWRULQDFRROSODFHZLWKVXI¿FLHQWYHQWLODWLRQ
.HHSDVSDFHRIFPRUPRUHEHWZHHQDVLGHRIWKHSURMHFWRUDQGRWKHU
objects such as walls.
Do not stop up, block nor cover the projector's vent holes.
'RQRWSODFHWKHSURMHFWRUDWSODFHVWKDWDUHH[SRVHGWRPDJQHWLF¿HOGVGRLQJ
so can cause the cooling fans inside the projector to malfunction.
ŹAvoid placing the projector in smoky, humid or dusty place.
'RQRWSODFHWKHSURMHFWRUQHDUKXPLGL¿HUV
NOTICE Ź3RVLWLRQWKHSURMHFWRUWRSUHYHQWOLJKWIURPGLUHFWO\KLWWLQJWKH
projector’s remote sensor.
Ź'RQRWSODFHWKHSURGXFWLQDSODFHZKHUHUDGLRLQWHUIHUHQFHPD\EHFDXVHG
ŹSet the ALTITUDE of the SERVICE item in the OPTION menu correctly. It is
recommended to leave it at AUTO usually. If the projector is used with a wrong
setting, it may cause damage to the projector itself or the parts inside.)RU
details, see User’s Manual - Operating Guide.
Arrangement
Refer to table T-1 at the back of this manual as well as the following to determine
the screen size and projection distance. The values shown in the table are
calculated for a full size screen.
Projector top
Projector bottom
Ⓗ×Ⓥ : Screen size
ⓐ:
Projection distance
(from the front of the
projector unit)
ⓑ,ⓒ: Screen height
7
ENGLISH
Connecting with your devices
%HIRUHFRQQHFWLQJWKHSURMHFWRUWRDGHYLFHFRQVXOWWKHPDQXDORIWKHGHYLFHWR
FRQ¿UPWKDWWKHGHYLFHLVVXLWDEOHIRUFRQQHFWLQJZLWKWKLVSURMHFWRUDQGSUHSDUH
the required accessories, such as a cable in accord with the signal of the device.
Consult your dealer when the required accessory did not come with the product or
the accessory is damaged.
After making sure that the projector and the devices are turned off, perform the
FRQQHFWLRQDFFRUGLQJWRWKHIROORZLQJLQVWUXFWLRQV5HIHUWR¿gures F-1 to F-4 at the
back of this manual.
)RUGHWDLOVVHHUser’s Manual - Operating Guide%HIRUHFRQQHFWLQJWKHSURMHFWRU
to a network system, be sure to read User’s Manual - Network Guide too.
WARNING Ź8VHRQO\WKHDSSURSULDWHDFFHVVRULHV2WKHUZLVHLWFRXOG
FDXVHD¿UHRUGDPDJHWKHSURMHFWRUDQGGHYLFHV
8VHRQO\WKHDFFHVVRULHVVSHFL¿HGRUUHFRPPHQGHGE\WKHSURMHFWRU¶V
manufacturer. It may be regulated under some standard.
1HLWKHUGLVDVVHPEOHQRUPRGLI\WKHSURMHFWRUDQGWKHDFFHVVRULHV
'RQRWXVHWKHGDPDJHGDFFHVVRU\%HFDUHIXOQRWWRGDPDJHWKHDFFHVVR-
ries. Route a cable so that it is neither stepped on nor pinched out.
Ź
+HDWPD\EXLOGXSLQWKH86%ZLUHOHVVDGDSWHUWRDYRLGSRVVLEOHEXUQVGLV-
connect the projector power cord for 10 minutes before touching the adapter.
:KHQXVLQJWKH86%ZLUHOHVVDGDSWHUEHVXUHWRFRQQHFWWKHDGDSWHUWRWKH
further USB TYPE A port from the LAN port and use the supplied adapter
cover (8).
CAUTION Ź)RUDFDEOHZLWKDFRUHDWRQO\RQHHQGFRQQHFWWKHHQGZLWK
the core to the projector. That may be required by EMI regulations.
Ź%HIRUHFRQQHFWLQJWKHSURMHFWRUWRDQHWZRUNV\VWHPEHVXUHWRREWDLQWKH
consent of the administrator of the network.
Ź
Do not connect the LAN port to any network that might have the excessive
voltage.
Ź
7KHGHVLJQDWHG86%ZLUHOHVVDGDSWHUWKDWLVVROGDVDQRSWLRQLVUHTXLUHGWRXVH
WKHZLUHOHVVQHWZRUNIXQFWLRQRIWKLVSURMHFWRU%HIRUHFRQQHFWLQJWKH86%ZLUHOHVV
adapter, turn off the power of the projector and disconnect the power cord.
Ź
%HIRUHUHPRYLQJWKH86%VWRUDJHGHYLFHIURPWKHSRUWRIWKHSURMHFWRUEHVXUH
WRXVHWKH5(029(86%IXQFWLRQRQWKHWKXPEQDLOVFUHHQWRVHFXUH\RXUGDWD
NOTE 'RQRWWXUQRQRURIIWKHSURMHFWRUZKLOHFRQQHFWHGWRDGHYLFHLQ
operation, unless that is directed in the manual of the device.
6RPHLQSXWSRUWVDUHVHOHFWDEOHLQWKHXVH)RUGHWDLOVVHHUser's Manual -
Operating Guide.
%HFDUHIXOQRWWRPLVWDNHQO\FRQQHFWDFRQQHFWRUWRDZURQJSRUW
,IDQRYHUVL]HG86%VWRUDJHGHYLFHEORFNVWKHLANSRUWXVHD86%H[WHQVLRQ
FDEOHWRFRQQHFWWKH86%VWRUDJHGHYLFH
8
Connecting power supply
1. Put the connector of the power cord into the AC (AC
inlet) of the projector.
2.
)LUPO\SOXJWKHSRZHUFRUG¶VSOXJLQWRWKHRXWOHW,QD
couple of seconds after the power supply connection,
the POWER indicator will light up in steady orange.
Please remember that when the DIRECT POWER ON
function activated, the connection of the power supply
make the projector turn on.
WARNINGŹ'RQRWFRQQHFWWKHSURMHFWRUWRDSRZHUVXSSO\ZKLOHQROHQV
unit is attached to it.
ŹPlease use extra caution when connecting the power cord, as incorrect or
IDXOW\FRQQHFWLRQVPD\UHVXOWLQ¿UHDQGRUHOHFWULFDOVKRFN
'RQRWWRXFKWKHSRZHUFRUGZLWKDZHWKDQG
Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one. Never modify the power cord.
Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
'RQRWGLVWULEXWHWKHSRZHUVXSSO\WRPXOWLSOHGHYLFHV'RLQJVRPD\RYHUORDG
WKHRXWOHWDQGFRQQHFWRUVORRVHQWKHFRQQHFWLRQRUUHVXOWLQ¿UHHOHFWULF
shock or other accidents.
&RQQHFWWKHJURXQGWHUPLQDOIRUWKH$&LQOHWRIWKLVXQLWWRWKHJURXQGWHUPLQDO
of the building using an appropriate power cord (bundled).
NOTICEŹ7KLVSURGXFWLVDOVRGHVLJQHGIRU,7SRZHUV\VWHPVZLWKDSKDVH
to-phase voltage of 220 to 240 V.
Fastening the adapter cover
:KHQXVLQJWKH86%ZLUHOHVVDGDSWHUEH
sure to connect the adapter to the further USB
TYPE A port from the LAN port and use the
supplied adapter cover
.
1.
Loosen the screw (marked with triangle) on
the bottom left of the USB TYPE A ports.
2. Insert the tab of the cover into the hole at the upper right of
the USB TYPE A ports in the direction of the arrow.
3. Align the screw holes on the projector and the cover. Then
insert the screw removed from the projector into the hole and
tighten the screw.
WARNING Ź.HHSVPDOOSDUWVDZD\IURPFKLOGUHQDQG
pets. Take care not to put in the mouth.
Ź+HDWPD\EXLOGXSLQWKH86%ZLUHOHVVDGDSWHUWRDYRLG
possible burns disconnect the projector power cord for 10
minutes before touching the adapter.
3
1
2
Tab
AC
Power
cord
9
ENGLISH
Turning on the power
1. 0DNHVXUHWKDWWKHSRZHUFRUGLV¿UPO\DQGFRUUHFWO\FRQQHFWHGWRWKH
projector and the outlet.
2. Make sure that the POWER indicator is
lighted in steady orange. Then remove the
lens cover.
3. Press the STANDBY/ON button on
the projector or the ON button on the
remote control.
The projection lamp will light up and the
POWER indicator will begin blinking in
green. When the power is completely on, the
indicator will stop blinking and light in steady
green.
WARNING Ź$VWURQJOLJKWLVHPLWWHGZKHQWKHSURMHFWRU¶VSRZHULVRQ'R
not look into the lens of the projector or look inside of the projector through any
of the projector’s openings.
NOTE3OHDVHSRZHURQWKHSURMHFWRUSULRUWRWKHFRQQHFWHGGHYLFHV
7KHSURMHFWRUKDVWKH',5(&732:(521IXQFWLRQZKLFKFDQPDNHWKH
SURMHFWRUDXWRPDWLFDOO\WXUQRQ)RUPRUHLQIRUPDWLRQSOHDVHVHHUser’s
Manual - Operating Guide.
POWER indicator
ON button
STANDBY/ON button
10
Adjusting the projector’s elevator
When the place to put the projector is slightly uneven to
the left or right, use the elevator feet to place the projector
horizontally. Using the feet can also tilt the projector
in order to project at a suitable angle to the screen,
elevating the front side of the projector within 9 degrees.
This projector has 2 elevator feet and 2 elevator buttons.
An elevator foot is adjustable while pushing the elevator
button on the same side as it.
1. Holding the projector, push the elevator buttons to
loose the elevator feet.
2. Position the front side of the projector to the desired
height.
3. Release the elevator buttons in order to lock the
elevator feet.
4. After making sure that the elevator feet are locked,
put the projector down gently.
5. If necessary, the elevator feet can be manually
twisted to make more precise adjustments. Hold the
projector when twisting the feet.
Adjusting the lens position
Shifting the lens position shifts the projection
position.
After pressing the LENS SHIFT button on the
control panel or the remote control, use the
cursor buttons to shift the lens position.
CAUTION Ź
'RQRWSXW\RXU¿QJHUVRUDQ\RWKHU
things around the lens. The moving lens could catch
them in the space around the lens and result in an injury.
NOTEThe projector may ignore operation by buttons while moving the lens.
*HQHUDOO\EHWWHULPDJHTXDOLW\FDQEHJRWZKHQWKHOHQVLVVHWWRWKHFHQWHU
LENS SHIFT
button
To loose an
elevator foot,
push the elevator
button on the
same side as it.
7R¿QHO\
adjust, twist
the foot.
LENS SHIFT button
CAUTION Ź'RQRWKDQGOHWKHHOHYDWRUEXWWRQVZLWKRXWKROGLQJWKH
projector, since the projector may drop down.
Ź'RQRWWLOWWKHSURMHFWRURWKHUWKDQHOHYDWLQJLWVIURQWZLWKLQGHJUHHVXVLQJ
the adjuster feet. A tilt of the projector exceeding the restriction could cause
malfunction or shortening the lifetime of consumables, or the projector itself.
,WLVSRVVLEOHWRLQVWDOOWKHSURMHFWRUIRUDQ\GLUHFWLRQZLWKVSHFL¿HGPRXQWLQJ
accessories. Consult with your dealer about such a special installation.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Dukane Projecteur
Dukane
Dukane ImagePro 8947 Manuel utilisateur
Dukane
Dukane 6710UL Manuel utilisateur
Dukane
Dukane ImagePro 8756A Manuel utilisateur
Dukane
Dukane 8120WIA Manuel utilisateur
Dukane
Dukane 8142WISS Manuel utilisateur
Dukane
Dukane ImagePro 8755H Manuel utilisateur
Dukane
Dukane ImagePro 8914 Manuel d'utilisation et d'entretien
Dukane
Dukane 28A7100HC Manuel utilisateur
Dukane
Dukane ImagePro 6662UL Manuel utilisateur
Dukane
Dukane 6660WUSSB Manuel utilisateur
Dukane
Dukane ImagePro 8792H Manuel utilisateur
Dukane
Dukane ImagePro 8753 Manuel utilisateur
Dukane
Dukane Digital-Multimedia Projector None Manuel utilisateur
Dukane
Dukane 28A8046 Manuel utilisateur
Dukane
Dukane ImagePro 8039B Manuel utilisateur
Dukane
Dukane ImagePro 8100 Manuel utilisateur
Dukane
Dukane 8755K-RJ Manuel utilisateur
Dukane
Dukane ImagePro 28A8800 Manuel utilisateur
Dukane
Dukane 6752WU Manuel utilisateur
Dukane
Dukane ImagePro 7300 Manuel utilisateur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
