Duerkopp Adler 589 Manuel utilisateur

589

Automatic double-chainstitch buttonholer

Operating instructions

Installation instructions

Service instructions

Postfach 17 03 51, D-33703 Bielefeld Potsdamer Straße 190, D-33719 Bielefeld

Telefon + 49 (0) 5 21 / 9 25-00 Telefax + 49 (0) 5 21 / 9 25 24 35 www.duerkopp-adler.com

Anleitung, komplett / Manual, complete

589

Postfach 17 03 51, D-33703 Bielefeld • Potsdamer Straße 190, D-33719 Bielefeld Sprache: Deutsch / Englisch

Telefon +49 (0) 521 / 9 25-00 • Telefax +49 (0) 5 21 / 9 25 24 35 • www.duerkopp-adler.com

Ausgabe / Edition: 07/2003 Printed in Federal Republic of Germany Teile-Nr.:/Part-No.: 0791 589001

Übersicht Summary

Bedienanleitung

Aufstellanleitung

Serviceanleitung

Bauschaltplan

9870 579020 B

Operating instructions

Installation instructions

Service instructions

Interconnection-diagram

9870 579020 B

Foreword

This instruction manual is intended to help the user to become familiar

with the machine and take advantage of its application possibilities in

accordance with the recommendations.

The instruction manual contains important information on how to

operate the machine securely, properly and economically. Observation

of the instructions eliminates danger, reduces costs for repair and

down-times, and increases the reliability and life of the machine.

The instruction manual is intended to complement existing national

accident prevention and environment protection regulations.

The instruction manual must always be available at the machine/sewing

unit.

The instruction manual must be read and applied by any person that is

authorized to work on the machine/sewing unit. This means:

–Operation, including equipping, troubleshooting during the work

cycle, removing of fabric waste,

–Service (maintenance, inspection, repair) and/or

–Transport.

The user also has to assure that only authorized personnel work on the

machine.

The user is obliged to check the machine at least once per shift for

apparent damages and to immediatly report any changes (including the

performance in service), which impair the safety.

The user company must ensure that the machine is only operated in

perfect working order.

Never remove or disable any safety devices.

If safety devices need to be removed for equipping, repairing or

maintaining, the safety devices must be remounted directly after

completion of the maintenance and repair work.

Unauthorized modification of the machine rules out liability of the

manufacturer for damage resulting from this.

Observe all safety and danger recommendations on the machine/unit!

The yellow-and-black striped surfaces designate permanend danger

areas, eg danger of squashing, cutting, shearing or collision.

Besides the recommendations in this instruction manual also observe

the general safety and accident prevention regulations!

General safety instructions

The non-observance of the following safety instructions can cause

bodily injuries or damages to the machine.

1. The machine must only be commissioned in full knowledge of the

instruction book and operated by persons with appropriate training.

2. Before putting into service also read the safety rules and

instructions of the motor supplier.

3. The machine must be used only for the purpose intended. Use of

the machine without the safety devices is not permitted. Observe all

the relevant safety regulations.

4. When gauge parts are exchanged (e.g. needle, presser foot, needle

plate, feed dog and bobbin) when threading, when the workplace is

left, and during service work, the machine must be disconnected

from the mains by switching off the master switch or disconnecting

the mains plug.

5. Daily servicing work must be carried out only by appropriately

trained persons.

6. Repairs, conversion and special maintenance work must only be

carried out by technicians or persons with appropriate training.

7. For service or repair work on pneumatic systems, disconnect the

machine from the compressed air supply system (max. 7-10 bar).

Before disconnecting, reduce the pressure of the maintenance unit.

Exceptions to this are only adjustments and functions checks made

by appropriately trained technicians.

8. Work on the electrical equipment must be carried out only by

electricians or appropriately trained persons.

9. Work on parts and systems under electric current is not permitted,

except as specified in regulations DIN VDE 0105.

10. Conversion or changes to the machine must be authorized by us

and made only in adherence to all safety regulations.

11. For repairs, only replacement parts approved by us must be used.

12. Commissioning of the sewing head is prohibited until such time as

the entire sewing unit is found to comply with EC directives.

13. The line cord should be equipped with a country-specific mains

plug. This work must be carried out by appropriately trained

technicians (see paragraph 8).

It is absolutely necessary to respect the safety

instructions marked by these signs.

Danger of bodily injuries !

Please note also the general safety instructions.

Contents page:

Part 2: Installation Instructions Class 589

1. Items supplied ..................................................3

2. General and shipping braces .........................................3

3. Installing the machine

3.1 Adjustingtheworkingheight...........................................4

3.2 Attachingtheyarnstand .............................................4

3.3 aligning and connecting the pedal........................................5

4. Electrical connection ..............................................6

5. Pneumatic connection

5.1 Connecting the maintenance unit ........................................7

5.2 Setting the operating pressure..........................................7

6. Lubrication

6.1 Filling the oil reservoirs ..............................................8

7. Sewing test.....................................................9

1. Items supplied

What items are supplied depends on your order. Prior to installation

please check that all the required parts are present.

–1head

–2operating panel

–3stand

–4pedal linkage

–5pedal

–6yarn stand

–7table plate

–8main switch

–9control box

–10 maintenance unit

–optional extras (depending on the order)

–tools and minor components in the accessory kit

2. General and shipping braces

CAUTION:

The machine must be set up by trained specialist personnel.

All work on the electrical equipment of this special sewing machine

may only be carried out by qualified electricians or other appropriately

trained persons.

The mains plug must be removed.

Shipping braces

All shipping braces must be removed before the machine is installed.

–Remove safety straps and battens on the machine head, table and

stand.

3. Installing the machine

3.1 Adjusting the working height

The working height is continuously adjustable between 85 and 120 cm

(measured to the upper edge of the table plate).

–Undo locking screws 1 and 2 on both sides of the stand.

–Adjust the table of the machine to the required working height.

–Tighten locking screws 1 and 2.

3.2 Attaching the yarn stand

–Insert the reel stand 3 in the hole in the table plate and secure it

with the nuts and washers.

–Fit and align the yarn-reel bracket 5 and unwinding arm 3 as

shown in the illustration.

NB: the yarn-reel holder and the unwinding arm must be vertically

in line.

–Depending on the type of yarn reel the centring piece 6 must be

set as shown in the above illustration. Incorrect settings may lead

to faults in operation.

3.3 Aligning and connecting the pedal

–Align the pedal 4 laterally on the stand brace 5 so that the middle of

the pedal is roughly beneath the needle.

–Screw the pedal 4 firmly to the stand brace.

–Screw the set value initiator 1 firmly to the stand brace.

–Attach the pedal linkage 3 to the set value initiator 1.

–Slightly undo clamping screw 2.

–Adjust the pedal linkage so that when released the pedal 4 is at an

angle of about 10°.

–Tighten clamping screw 2.

4. Electrical connection

CAUTION:

The mains voltage must coincide with the rated voltage specified on

the name plate.

The machine adapts the local mains voltage via connection terminals 1

to 5 and A to D of the transformers in the control box.

Both the transformer terminals are factory-set to a mains voltage of

230 V.

For different mains voltages the terminals must be connected as

follows:

Strip terminal 2:

Voltage blue brown-and-white

200V A B

230V A C

240V A D

On strip terminal 5 the brown-and-white and blue-and-white wire

jumpers must be changed. Both connection terminals are given in the

table.

Example:

“L-4" means place the wire jumper between terminals L and 4.

Strip terminal 5:

Voltage brown-and-white blue-and-white

190V L - 4 N - 3

200V L - 4 N - 2

210V L - 4 N - 1

220V L - 5 N - 3

230V L - 5 N - 2

240V L - 5 N - 1

–Undo screws 3.

–Carefully remove the cover 4.

–Check the configuration of the connections to the transformer

plug strips.

–If necessary change the connections in line with the mains

voltage.

–Re-attach the cover 4 with screws 3.

Autres manuels pour 589

Table des matières

Autres manuels Duerkopp Adler Machine à coudre

Duerkopp Adler

Duerkopp Adler 171 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 745-34 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 669 Premium Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 4120-5 Guide de dépannage

Duerkopp Adler

Duerkopp Adler 744-122 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 739-23 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 175 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 265 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 745-8 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 973-S-204-4/. Mode d’emploi

Duerkopp Adler

Duerkopp Adler 550-16-23 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 204-370 Guide de dépannage

Duerkopp Adler

Duerkopp Adler 745-34 Manuel

Duerkopp Adler

Duerkopp Adler 175 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 743-105 s Mode d’emploi

Duerkopp Adler

Duerkopp Adler 4220-6 Guide de dépannage

Duerkopp Adler

Duerkopp Adler 205-64 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 4181i-3 Guide de dépannage

Duerkopp Adler

Duerkopp Adler 550-867 s Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 530 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 527-105 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 510 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 550-16 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 296-FA21 Manuel utilisateur

Manuels Machine à coudre populaires d'autres marques

Riccar

Riccar RL634DE Manuel utilisateur

Singer

Singer 2517 Manuel utilisateur

Pfaff

Pfaff 3307-1 SERIES Manuel utilisateur

Janome

Janome Quilt Maker Pro 18 VERSA Manuel utilisateur

Siruba

Siruba C007JP Manuel utilisateur

Husqvarna Viking

Husqvarna Viking Designer SE Manuel utilisateur

Singer

Singer 148-5 Manuel utilisateur

IKEA

IKEA SY Manuel utilisateur

Pfaff

Pfaff 571 Manuel utilisateur

Singer

Singer 15-91 Manuel utilisateur

Brother

Brother BB370 Manuel utilisateur

Pegasus

Pegasus WT100 Series Manuel utilisateur

Reliable

Reliable 7100DB Manuel utilisateur

Pfaff

Pfaff 937 Manuel utilisateur

Singer

Singer 6038 Manuel utilisateur

Singer

Singer 413K Manuel utilisateur

Pfaff

Pfaff 1471 E1 Manuel utilisateur

Kenmore

Kenmore 16677 - Serger Sewing Machine Manuel utilisateur