DStv 5 Manuel utilisateur
DStv Switch (5-1)
User Guide
Introduction
Some of the information in this guide can get a little technical; as always, we recommend the use of
a DStv Accredited Installer for all your installation needs. It’s easy to locate one in your area - just go
to www.dstv.com.
You’re one step closer to our world of extraordinary entertainment!
This DStv Switch has been specially designed and manufactured for your
DStv Explora and XtraView installations. You’ll need the DStv Switch in
order to connect your DStv Explora to most existing DStv installations.
This User Guide will help you with simple connections to your satellite
dish, your DStv Explora and some XtraView combinations. If you have
another kind of multiswitch or a custom installation, then please refer to
www.dstv.com for further information.
The DStv Switch (5-1) carries a 12-month warranty from the day you
bought it. Terms and Conditions can be found on www.dstv.com.
• The DStv Switch (5-1) has:
- Four inputs (labelled H/L, V/L, H/H, V/H);
- Four normal multiswitch outputs (labelled 1 to 4); and
- Two Explora outputs (labelled A and B). The DStv Explora can only be
connected to this output.
• Each multiswitch output (labelled 1 to 4) outputs a signal equivalent to a
normal multiswitch output or a single LNB output.
• The DStv Switch comes with 3 cables. You may need additional cabling,
depending on your set up.
• The DStv Switch self-terminates unused
ports, which means you don’t have to cap
them.
• You’ll know your switch is powered when
the blue light is on.
• Keep in mind - this switch is not a signal
booster. 1 2 3 4
Inputs
H/L V/L H/H V/H
A
B
Multiswitch outputs
Explora
outputs
DStv Switch (5-1)
1
DStv Switch - User Guide
Your DStv Switch (5-1)
Troubleshooting Tip
If the DStv Switch’s blue light is not on (indicating that it’s getting power), check that the outputs to
the decoder(s) are: 1) Securely connected (both to the switch and decoder), and 2) That the decoder(s)
themselves are switched on and getting power.
DStv Switch - User Guide
2
LNB Requirements
* IS20 is the satellite footprint used for DStv services in Southern Africa. E36B is for East and
West African countries.
** Unicable™, is a standard for single cable distribution of multiple satellite signals. SatCR (Satellite
Cable Router) and CSS (Channel Stacking Switch) both provide Unicable™ solutions.
• If you are in South Africa or Southern Africa (an IS20*installation), your
DStv Switch (5-1) requires input from a twin, quad or quattro LNB. It will
not work if connected to a single feed or UnicableTM LNB**, even if the feed
is split.
• If you’re in Angola or Mozambique (an E36B*installation), your DStv
Switch (5-1) requires inputs from either a quad or quattro LNB. It will not
work if connected to a twin LNB, single feed or UnicableTM LNB**, even if
the feed is split.
• If you are located anywhere else in Africa (an E36B*installation), your DStv
Switch (5-1) requires input from a twin, quad or quattro LNB. It will not
work if connected to a single feed or UnicableTM LNB**, even if the feed is
split.
If you are unsure of the LNB used in your installation, which satellite your installation connects to, or if
your installation has several multiswitches, we recommend contacting a DStv Accredited Installer. You
can find your nearest one at www.dstv.com
Connecting the Inputs from your Satellite Dish
The following diagrams show you how to connect the inputs from your
satellite dish.
Twin LNB Connection (IS20 only)
Twin LNB
Any LNB cable can
connect to any of these
two inputs
DStv Switch (5-1) H/L V/L H/H V/H
3
DStv Switch - User Guide
Please Note
• If you have a Unicable™ LNB, you can connect your LNB cable directly to the DStv Explora (there is
no need to use this switch).
• If you have a Unicable™ LNB with multiple decoders in your home, please contact your DStv
Accredited Installer.
• The DStv Switch (5-1) may not be required when connecting the DStv Explora to existing single-
cable distribution systems (like those found in apartments or complexes). Please refer to the
installer of the system for confirmation.
Quad LNB Connection
Quad LNB
At least two of the quad LNB cables
have to be connected to the H/L and
V/L inputs. Any LNB cable can go to
the any of the latter inputs.
Optional to
connect the
second two quad
LNB cables.
H/L V/L H/H V/H
Twin LNB Connection (E36B only)
Twin LNB
Any LNB cable can
connect to any of
these two inputs
H/L V/L H/H V/H
DStv Switch (5-1)
DStv Switch (5-1)
DStv Switch - User Guide
4
3 Cable Quad LNB Connection
(E36B Angola and Mozambique only)
Quad LNB
Any LNB cable can
connect to any of
these 3 inputs
H/L V/L H/H V/H
DStv Switch (5-1)
Quattro LNB Connection
Quattro LNB Use quattro
LNB output
labels to match
DStv Switch (5-1)
input labels.
H/L V/L H/H V/H
H/L
V/L
H/H
V/H
DStv Switch (5-1)
5
DStv Switch - User Guide
Connecting the DStv Switch (5-1) to one DStv Explora
Once the switch has been connected to the satellite dish, use the
supplied cable and connect output A or B on the switch to the input
labelled UNICABLE™ IN on the back of your DStv Explora.
1 2 3 4
DStv Explora
H/L V/L H/H V/H
A
B
Connecting the Switch to your Decoder(s)
The DStv Switch (5-1) has two Explora outputs (labelled A and B) and four
normal multiswitch outputs (labelled 1 to 4).
• The Explora outputs can only be connected to a DStv Explora, they aren’t
designed to connect to other decoder models. (Note: The DStv Switch (5-1)
can only be connected to one DStv Explora at any one time.)
• The four normal multiswitch outputs can be connected to up to four single
view decoders, one 4 Tuner HD PVR, or a mix of DStv decoders (other
than the DStv Explora). Again, remember that the DStv Explora cannot be
connected to these particular outputs.
DStv Switch - User Guide
6
These diagrams exclude the connections between decoders that are required for XtraView. For
information on XtraView installations, including connections and settings, please contact a DStv
Accredited Installer or go to www.dstv.com
7
DStv Switch - User Guide
H/L V/L H/H V/H
1234
A
B
DStv Explora 1
H/L V/L H/H V/H
1234
A
B
DStv Explora 2
Connecting the DStv Switch (5-1) to two DStv Exploras (IS20)
This installation requires a DStv Switch per DStv Explora. The DStv Switch
(5-1) can only be connected to one DStv Explora at any one time.
• Once the first switch has been connected to the satellite dish, connect
output A or B on the first switch to the input labelled UNICABLE™ IN on
the back of your first DStv Explora.
• Then, using the provided cables, connect the first DStv Switch to a second
DStv Switch. Connect the outputs labelled 1 and 2 on the first switch, to
the inputs marked H/L and V/L on the second switch.
• Once the DStv Switches have been connected, connect output A or B on
the second switch to the input labelled UNICABLE™ IN on the back of
your second DStv Explora.
1
2
DStv Switch - User Guide
8
H/L V/L H/H V/H
1234
A
B
DStv Explora 1
H/L V/L H/H V/H
1234
A
B
DStv Explora 2
Connecting the DStv Switch (5-1) to two DStv Exploras
(E36B Angola and Mozambique only)
This installation requires a DStv Switch per DStv Explora. The DStv Switch
(5-1) can only be connected to one DStv Explora at any one time.
• Once the first switch has been connected to the satellite dish, connect
output A or B on the first switch to the input labelled UNICABLE™ IN on
the back of your first DStv Explora.
• Then, using the provided cables, connect the first DStv Switch to a second
DStv Switch. Connect the outputs labelled 2, 3 and 4 on the first switch,
to the inputs marked V/L, H/H and V/H on the second switch.
• Once the DStv Switches have been connected, connect output A or B on
the second switch to the input labelled UNICABLE™ IN on the back of
your second DStv Explora.
1
2
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels DStv Changer
