DSE RJ Series Manuel utilisateur

INSTALLATION MANUAL

RJ SERIES - IP CAMERAS SPEED DOME

Page: 1 Page: 1

DSE SRL - ITALY - WWW.DSE.EU

RJ Series IP Cameras

Speed Dome of ONVIF IP network

Installation and Configuration

How to connect the camera How to make the

connection in the network How to configure the cameraconnection in the network How to configure the camera

INSTALLATION MANUAL

RJ SERIES - IP CAMERAS SPEED DOME

Page: 2 Page: 2

DSE SRL - ITALY - WWW.DSE.EU

Contents of this handbook

The range of cameras and RJ RK series is a range of IP cameras for network connection developed for use with NVRs.

This manual explains how to connect the camera, how to make the basic adjustments and how to configure the parameters for the

network connection.

INSTALLATION MANUAL

RJ SERIES - IP CAMERAS SPEED DOME

Page: 3 Page: 3

DSE SRL - ITALY - WWW.DSE.EU

Introduction

The DSE speed dome IP cameras RJ series of IP network cameras with H.264 compression at full

resolution FULLHD 1080P 1920x1080 pixels. These cameras "NUDE" that is not equipped with its resolution FULLHD 1080P 1920x1080 pixels. These cameras "NUDE" that is not equipped with its resolution FULLHD 1080P 1920x1080 pixels. These cameras "NUDE" that is not equipped with its

recording capability on NAS and SD card nor video surveillance systems including software. They

are developed to work with network video recorders NVR ONVIF ranging always provided in

combination to handle the recording and remote access functions.

The units are connected to a LAN via RJ45 port as a computer or other network drives and images

can be displayed on a PC using Internet Explorer browser.

The power of IP speed dome cameras RJ series is possible with the 12VDC adapter (included). the POE is not supported due to the

absorption of the illuminator.

The sensing element of this array is a CMOS SONY EXMOR, a benchmark in the field, used successfully in our most IP cameras

equipped (RH series).

The heart of the RJ series network cameras is the A5S66 Ambarella DSP processor

that allows performance to the top of the market with advanced image control

functions and Wide Dynamic Range in addition to an absolute stability of operation in

the long run.

The RJ series of network equipment using H.264 compression Hi-Profile.

The RJ Series cameras fully support the ONVIF international protocol and are

compatible with any IP recording software or network video recorder (NVR)

multi-protocol capable of handling this standard.

INSTALLATION MANUAL

RJ SERIES - IP CAMERAS SPEED DOME

Page: 4 Page: 4

DSE SRL - ITALY - WWW.DSE.EU

Technical data

See updated at tables: http://www.dseitalia.it/dati_telecamere_ip.htm

INSTALLATION MANUAL

RJ SERIES - IP CAMERAS SPEED DOME

Page: 5 Page: 5

DSE SRL - ITALY - WWW.DSE.EU

Installation

CONNECTIONS

The cameras speed dome series RJ have 2 sun connections: a mains socket and a 12VDC power plug,

•NETWORK PORT RJ45 - RJ45 FEMALE connector to connect the LAN. To connect to a hub or network switch using a standard

LAN cable. To directly connect a single PC using a crossover cable (crossover).

•12VDC - plug which connect the power supply 220VAC / 12VDC by at least 3A (included)

VERIFICATION OF CONNECTIONS

After connecting the camera to the power supply check that it performs an automatic rotational movement which certifies the proper

nutrition. If the camera does not perform any movement check the power supply.

After connecting the network cable to the switch verified that the LEDs of the switches that correspond to the port that is used to start

flashing. If you check remain off the network cable.

MOUNTING THE CAMERA

The cameras are to be fixed to the wall with the supplied mounting bracket. The connecting cord extends through the bracket.

The camera housing is watertight and can be exposed to rain. The connections must be protected from the

weather.

The cable entry may be provided at the center of the bracket if the cable passage is walled. Alternatively, there is a cable entry in the

bracket with tin grommet.

INSTALLATION MANUAL

RJ SERIES - IP CAMERAS SPEED DOME

Page: 6 Page: 6

DSE SRL - ITALY - WWW.DSE.EU

INSTALLATION MANUAL

RJ SERIES - IP CAMERAS SPEED DOME

Page: 7 Page: 7

DSE SRL - ITALY - WWW.DSE.EU

Network Configuration

After providing power to the camera via the 12VDC power supply and after having connected the camera to the network switch with

the LAN cable, the configuration of the network parameters must proceed in such a way to be able to make the cameras accessible

by computer. The cameras are supplied with IP address 192.168.2.100 factory.by computer. The cameras are supplied with IP address 192.168.2.100 factory.

SOFTWARE IPWIZARD

The CD supplied with the camera software is included IPWIZARD that requires no installation and can easily be run on any PC on The CD supplied with the camera software is included IPWIZARD that requires no installation and can easily be run on any PC on The CD supplied with the camera software is included IPWIZARD that requires no installation and can easily be run on any PC on

the network. The function of this software is to detect the presence of the camera in the network, regardless of its address, and

allow you to change the camera address in order to be consistent with your network. We recall that because the camera is visible

from the other PCs on the network it is necessary that the first 3 address parts are the same as other network PC and is equal also

the subnet mask. And 'advisable to connect a network camera at a time, and insert new ones after you have set earlier.

PRELIMINARY CHECKS

Before you must obtain from your network some information about the management of the IP addresses used on your network. E

'need to know an IP address can be assigned to the camera that is not equal to any other device already present in the network. If

you are uncertain about the operation of your network, you can use certain commands in DOS PROMPT.

On a network PC launched a DOS window available between the Windows accessory programs. Type IPCONFIG at the

command prompt and press ENTER. They will see the TCP / IP parameters. The second line is the IP address assigned to your

computer.

INSTALLATION MANUAL

RJ SERIES - IP CAMERAS SPEED DOME

Page: 8 Page: 8

DSE SRL - ITALY - WWW.DSE.EU

In the above example the address of the PC on which you are working is 192.168.2.3 and the subnet mask used is the classic

255.255.255.0. The camera can therefore assign an address chosen by the 192.168.2.XXX type, where XXX stands for a number

between 0 and 255. E '

important choose an address that is not already used by other devices of network. To verify that the chosen address is important choose an address that is not already used by other devices of network. To verify that the chosen address is important choose an address that is not already used by other devices of network. To verify that the chosen address is

free, try to make a PING from the same DOS window by typing PING followed by a space and by the IP you wish to assign to the

camera. If there is no device responds to that address, you will receive 4 REQUEST TIME OUT as in the following example:

All cameras support the automatic IP address assignment from a DHCP server. This mode, however, is not recommended

because in the event of power failure or restart of the equipment it is possible that the cameras IP address change necessitating a

reconfiguration of the NVR.

INSTALLATION MANUAL

RJ SERIES - IP CAMERAS SPEED DOME

Page: 9 Page: 9

DSE SRL - ITALY - WWW.DSE.EU

IPWIZARD OF USE TO ASSIGN IP ADDRESS

After connecting the camera you need to change the address of the camera to assign one consistent with its own network (first 3 parts of

the address common to all network equipment). Proceed as follows:

1. Insert the CD into a PC player and explore the content. You will find a file named IPWIZARD. IP WIZARD does not require

installation. E 'can copy the file to a USB key to easily run the program on any PC on the network. Double-click the icon and it will

launch the program.

2. Click on the SEARCH button. The program will start to search for the IP cameras RK series2. Click on the SEARCH button. The program will start to search for the IP cameras RK series

present in the network. Wait to complete the search. IPCSEARCH is able to detect even cameras with different address class from

that of the PC on which you are working.

3. When the search will see the list of detected cameras. If the camera is not3. When the search will see the list of detected cameras. If the camera is not

It was detected check the functionality of network links. In the IP ADDRESS column shows the IP address of the camera current.

Click on the camera and you'll see in the section below all other network parameters.

INSTALLATION MANUAL

RJ SERIES - IP CAMERAS SPEED DOME

Page: 10 Page: 10

DSE SRL - ITALY - WWW.DSE.EU

4. Of particular relevance are of the IP address (IP ADDRESS) which must have the same class 4. Of particular relevance are of the IP address (IP ADDRESS) which must have the same class

of the network (the first three groups of equal numbers) and the SUBNETMASK which must be the same as that used by the

network (typically 255.255.255.0).

the communication ports used by the camera that agrees are also reported not change if not really necessary. You can edit the

network parameters as desired by writing in the boxes. Press MODIFY or MODIFY NETWORK PORT for transferring the pattern

into the camera. Wait for the camera to accept the new settings. Check, by pressing the SEARCH button, the camera is detected

again with the new address.