DSC PowerSeries PC1616 Manuel utilisateur
For a detailed review of the entire system, please view the DSC Power Series system manual.
This manual includes instruction variations for LED and LCD keypads. Any instructional differences are
indicated by the use of ‘OR’.
Arm and Disarm
Arm:
To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY]
button OR enter your [security code] + [*] + [0] to Quick Arm.
To arm all sensors in STAY mode when you are not leaving the premises, press and hold the [STAY]
button OR enter your [security code] and do not leave the premises.
To arm all in NIGHT mode, where both the interior and exterior are armed, press [*] + [1] after first
arming in STAY mode.
Disarm:
To disarm, enter your [security code] .
Quick Guide: DSC Power Series PC1616
Battery
The DSC Power Series 1616 operates on a UB 1270 battery.
Loss of AC power and use of backup battery power is indicated by NO AC.
A low battery condition is indicated by BAT.
For instructions on replacing your battery, please visit our Battery Replacement Page.
Bypassing Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, press [*] to enter the function menu.
Press [1] OR [*], then your [security code].
Enter the two digit number of the zone to be bypassed OR use the [<>] keys to find the zone.
Press [*] to select the zone.
A [B] will appear once a zone has been bypassed.
To exit bypassing mode and return to Ready state, press [#].
To unbypass a zone, enter the two digit zone number OR use [<>] to find the zone, then press [*]. The
[B] will disappear from the display.
To exit and return to Ready state, press [#].
Change Time and Date
Press [*] + [6] + [Master security code] OR use the [<>] to find the [Time and Date] option from the
menu, then press [1].
Either enter the time in 24-hour format, i.e., 16:30 for 4:30pm OR use the [<>] scroll keys to find the
desired time.
Either enter the date in MM:DD:YY format, i.e., 03/02/15 for March 2, 2015 OR use the [<>] scroll keys
to find the desired date.
Press [#] to exit.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a protected door/window
is opened.
To turn the door chime function off, press and hold the [Chime] key for two seconds OR press [*] +
[4].
To turn the door chime function on, press and hold the [Chime] key for two seconds OR press
[*] + [4].
Reset
To view the display after an alarm event, press [*] + [3] OR use the [<>] to view sensors in the alarm
event.
To clear your alarm history after an event, first arm your system with your [security code], then disarm
your system to clear the event history.
To clear the display after a fire alarm, hold the [Reset] button for several seconds to clear the fire
alarm history.
Trouble Condition alarms will clear from the display when the condition no longer exists.
Security Codes
You can program additional user codes and attributes. Additional users will be restricted to arming and
disarming functions, while the Master user code can perform all functions.
To program a new user, press [*] + [5] + [Master security code].
Enter the two digit number to be programmed, i.e., 06 for Access Code 6 OR use the [<>] to find the
desired user code and press [*] to select.
Enter the new user’s new code.
Continue adding additional user codes or press [#] to exit.
To erase an access code, select the code using [*] as the first digit. The system will automatically erase
the access code.
Some user codes have been pre-programmed:
User Level
Explanation
Assigned User Code
Master
Can perform all functions
and assign codes.
[40], can only be changed
by an installer.
User
Access defined by Master.
[1]-[32]
Supervisor
Similar to Master level, but
can be changed without
requiring an installer.
[41], [42]
Duress
Code secretly sends a
duress report. Any user
code can be made a
Duress code.
[33], [34]
Zone Bypassing
Can manually bypass zones
and arm/disarm the
system.
[3]
Onetime User Code
Can disarm the system
once per day. Reset daily at
midnight.
[8]
For a complete list of user codes and attributes please see the DSC Power Series system manual.
Trouble Conditions
When a trouble condition is detected, the Trouble or System indicator will turn on and the keypad will beep
every 10 seconds.
To silence the Trouble Condition beeps, press [#].
To view the Trouble Condition, press [*] + [2].
To override the Trouble Condition and continue to arm, press [*] + [2], then press [9].
For a list of possible Trouble Conditions, please see the DSC Power Series system manual.
Autres manuels pour PowerSeries PC1616
10
Table des matières
Autres manuels DSC Panneau de contrôle
DSC
DSC PowerSeries PC1616 Manuel utilisateur
DSC
DSC PowerSeries PC1616 Manuel utilisateur
DSC
DSC AFD2000 Manuel utilisateur
DSC
DSC Maxsys PC6010 Manuel du propriétaire
DSC
DSC WP8010 Instructions de montage
DSC
DSC PowerSeries PC1616 Manuel utilisateur
DSC
DSC PC1580BABT Manuel utilisateur
DSC
DSC PC2585 Manuel utilisateur
DSC
DSC PC2000 Manuel utilisateur
DSC
DSC CLASSIC PC1555 Manuel utilisateur
DSC
DSC PowerSeries Neo Manuel utilisateur
DSC
DSC Power Series Manuel utilisateur
DSC
DSC PC5508 Manuel utilisateur
DSC
DSC neo HS2016 Manuel utilisateur
DSC
DSC Power Series PC1616 Manuel utilisateur
DSC
DSC PowerSeries PC1616 Manuel utilisateur
DSC
DSC PC550 Manuel utilisateur
DSC
DSC PowerSeries Neo Manuel utilisateur
DSC
DSC PowerSeries PC1616 Manuel utilisateur
DSC
DSC CFP-102 Manuel utilisateur
