DSC Power Series PC1616 Manuel utilisateur
DSC Power Series PC1616 - Quick Guide
https://alpha.adt.com/help/20.html[11/8/2018 11:27:26 PM]
DSC Power Series PC1616 - Quick Guide
For a detailed review of the entire system, please view the DSC Power Series 1616 manual.
There are two variations of the keypad for this system. This quick guide contains information for both,
indicated by the use of ‘OR’ in the instructions.
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Date &
Time
Settings
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY]
button.
To arm all sensors in STAY mode when you are not leaving the premises, press and hold the [STAY]
button OR enter your [security code] and do not leave the premises.
To arm all in NIGHT mode, where both the interior and exterior are armed, press [*] + [1] after first
Select
DSC Power Series PC1616 - Quick Guide
https://alpha.adt.com/help/20.html[11/8/2018 11:27:26 PM]
arming in STAY mode.
To Quick Arm, press [*] + [0]. To enable or disable the Quick Arm feature on your device, enter [*] +
[9] + [Master Code] + [4].
Disarm:
To disarm, enter your [security code].
For more information on this topic please visit the complete DSC PC1616 manual.
Battery
The DSC Power Series 1616 operates on a UB 1270 battery.
Loss of AC power and use of backup battery power is indicated by NO AC.
A low battery condition is indicated by BAT.
For instructions on replacing your battery, please go to the Battery Replacement Page for this
battery.
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, press [*] to enter the function menu.
Press [1] OR [*], then your [security code].
Enter the two digit number of the zone to be bypassed OR use the [<>] keys to find the zone.
Press [*] to select a zone.
A [B] will appear once a zone has been bypassed.
To exit bypassing mode and return to Ready state, press [#].
To unbypass a zone, enter the two digit zone number OR use [<>] to find the zone, then press [*].
The [B] will disappear from the display.
For more information on this topic please visit the complete DSC PC1616 manual.
Change Date and Time
Press [*] + [6] + [Master security code] OR use the [<>] to find the [Time and Date] option from the
menu, then press [1].
Either enter the time in 24-hour format, i.e., 16:30 for 4:30pm OR use the [<>] scroll keys to find the
desired time.
Either enter the date in MM:DD:YY format, i.e., 03/02/15 for March 2, 2015 OR use the [<>] scroll
keys to find the desired date.
DSC Power Series PC1616 - Quick Guide
https://alpha.adt.com/help/20.html[11/8/2018 11:27:26 PM]
Press [#] to exit.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a protected
door/window is opened.
To turn the door chime function off, press and hold the [Chime] key for two seconds OR press [*] +
[4].
To turn the door chime function on, press and hold the [Chime] key for two seconds OR press [*] +
[4].
Reset
To view the display after an alarm event, press [*] + [3] OR use the [<>] to view sensors in the alarm
event.
To clear your alarm history after an event, first arm your system with your [security code], then
disarm your system to clear the event history.
To clear the display after a fire alarm, hold the [Reset] button for several seconds to clear the fire
alarm history.
Trouble Condition alarms will clear from the display when the condition no longer exists.
Security Codes
You can program additional user codes and attributes. Additional users will be restricted to arming and
disarming functions, while the Master user code can perform all functions.
To program a new user, press [*] + [5] + [Master security code].
Enter the two digit number to be programmed, i.e., 06 for Access Code 6 or use the [<>] to find the
desired user code and press [*] to select.
Enter the new user’s new access code.
Continue adding additional user codes or press [#] to exit.
To erase an access code, select the code using [*] as the first digit. The system will automatically
erase the access code.
Some user numbers have been pre-programmed:
User Level Explanation Assigned User Code
Master Can perform all functions and assign codes [40], can only be changed by
an installer
DSC Power Series PC1616 - Quick Guide
https://alpha.adt.com/help/20.html[11/8/2018 11:27:26 PM]
Return to Top
User Access defined by Master User [1] - [32]
Supervisor Similar to Master level, but can be changed without
requiring an installer. [41], [42]
Duress Code secretly sends a duress report. Any user code can be
made a Duress code. [33], [34]
Zone
Bypassing Can manually bypass zones and arm/disarm the system. [3]
Onetime User
Code
Can disarm the system once per day. Reset daily at
midnight. [8]
For more information on this topic please visit the complete DSC PC1616 manual
Trouble Conditions
When a trouble condition is detected, the Trouble or System indicator will turn on and the keypad will
beep every 10 seconds.
To silence the Trouble Condition beeps, press [#].
To view the Trouble Condition, press [*] + [2].
To override the Trouble Condition and continue to arm, press [*] + [2], then press [9].
For more information on this topic please visit the complete DSC PC1616 manual.
Volume
The volume on the DSC PC1616 is not adjustable.
How can we help?
Search
Table des matières
Autres manuels DSC Panneau de contrôle
DSC
DSC neo HS2016 Manuel utilisateur
DSC
DSC MAXSYS PC4020NK Guide de l'utilisateur
DSC
DSC PowerSeries PC1616 Manuel utilisateur
DSC
DSC Power632 Manuel utilisateur
DSC
DSC PowerSeries PC1616 Manuel utilisateur
DSC
DSC PC5020 Manuel utilisateur
DSC
DSC PowerSeries PC1616 Manuel utilisateur
DSC
DSC MAXSYS PC4020 Manuel utilisateur
DSC
DSC PowerSeries Neo Manuel utilisateur
DSC
DSC PC1580BABT Manuel utilisateur
DSC
DSC Classic PC1565 Manuel utilisateur
DSC
DSC PowerSeries Neo Manuel utilisateur
DSC
DSC PowerSeries Neo Manuel utilisateur
DSC
DSC ALEXOR PC9155 Mode d’emploi
DSC
DSC WP8010 Instructions de montage
DSC
DSC Envoy NT9010DMK Manuel utilisateur
DSC
DSC Power Series Manuel utilisateur
DSC
DSC PowerSeries PC1616 Manuel utilisateur
DSC
DSC MAXSYS PC4612 Manuel de service
DSC
DSC PC5508 Manuel utilisateur
