Dreamline DUET Manuel utilisateur
Duet Tub Door & QWALL-TUB Kit
Tub Door AND SHOWER BACKWALLS KIT INSTALLATION
INSTRUCTIONS
IMPORTANT
DreamLineTM reserves the right to alter, modify or redesign products at any time
without prior notice. For the latest up-to-date technical drawings, manuals or any
other details please refer to the support.BathAuthority.com web page.
STEP 1: Install Shower Backwalls
Shower Backwalls Installation Instructions
STEP 2: Install Shower Door
Shower Door Installation Instructions
Please read these instructions carefully before installing. If you have any questions regarding
installation, please call our technical support specialists Monday through Friday 9:00 AM –5:00
PM EST at Phone: 1-866-731-2244, Fax:1-866-227-1533 or e-mail our technical support
group at
For more information on DreamLine Shower Kit please visit www.BathAuthority.com
DUET
SHOWER DOOR INSTALLATION INSTRUCTIONS
IMPORTANT
DreamLineTM reserves the right to alter, modify or redesign products at any time
without prior notice. For the latest up-to-date technical drawings, manuals or any
other details please refer to the support.bathauthority.com web page.
Please carefully read the instructions before installing. If you have any questions
regarding installation, please call our technical support specialists Monday through
Friday 9:00 AM – 5:00 PM EST at 1-866-731-8378, ext. 3 or e-mail our technical
support group at
For more information on DreamLineTM Shower Doors please visit www.BathAuthority.com
Rev 1.1 1
Preparation
1. After opening all boxes and packages, read this introduction carefully. Check that all of
the needed parts are included in the package, by marking all the components on the
“Detailed Diagram of Shower Door Components”. Examine boxes and packages for
shipping damage. If the unit has been damaged, has a finishing defect, or has missing
parts, please contact our customer support department within 3 business days of the
delivery date. Please note that DreamLine TM will not replace any damaged products
or missing parts free of charge after 3 business days or if the product has been
installed. Feel free to contact DreamLineTM if you have any questions.
2. Please note that you should consult your local building codes with questions on
installation compliance standards. Building and plumbing codes may vary by
location, and DreamLine is not responsible for code compliance standards for your
project.
3. Please insure that prior to the installation the installation surface is leveled and solid and
will be able to support the total weight of the unit. Also make sure the walls are at right
angles. While some adjustment in leveling of the door is possible, irregular installation
surface level or improper angle of side walls will result in serious problems for your
installation. Please, note that some adjustments and drilling might be necessary during
the installation process.
4. Please, NOTE! This door has only ½” out-of-plumb adjustment. Make sure your
walls are as close to being plumb as possible.
Tools Required
Caulk Tape
Measure Pencil Screwdriver
Phillips
Level Gun
Caulk Drill
Electric Hammer Miter saw or Hacksaw
Drill bit Drill bit
(Ø=5/16") (Ø=1/8")
Rev 1.1 2
Detailed Diagram of Shower Door Components
1
23
4
6
7
8
9
10
11
12
13
14
5
Packing List
01 Upper guide rail 1pc 08 Round head screw ST4.2×16 16pcs
02 Wall profile 2pcs 09 Round head screw ST4.2×30 18pcs
03 Glass profile 2pcs 10 Decorative cover 10pcs
04 Bottom guide rail 1pc 11 Roller 4pcs
05 Glass door 2pcs 12 Handle bracket 4pcs
06 Handle 2pcs 13 Guide block (left, right, middle) 1 set
07 Wall anchor 8pcs 14 Rubber stopper 6pcs
NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the
detailed diagram and packing list in your manual as a reference. Before discarding the
carton, check for small hardware bags that tend to fall to the bottom of the box. If any parts
are damaged or missing, please contact DreamLineTM for replacement.
Rev 1.1 3
Shower Door Installation
1. Measure the distance between two walls.
This distance is marked as “W”.
See Fig. 1 for details.
Fig. 1
W
2. The Upper guide rail (01) and the Bottom
guide rail (04) has been precut for the
installation between the walls with a distance
of:
a) 48”
If W=48”, then it is unnecessary to cut the
Guide rails and you can continue to Step 3.
If W<48”,you will need to cut:
•Upper guide rail (01) from one end.
The cutting length will be D;
D=48”−W.
•Bottom guide rail (04) from both ends.
The cutting length will be D/2.
b) 60”
If W=60”, then it is unnecessary to cut the
Guide rails and you can continue to Step 3.
If W<60”,you will need to cut:
•Upper guide rail (01) from one end.
The cutting length will be D;
D=60”−W.
•Bottom guide rail (04) from both ends.
The cutting length will be D/2.
See Fig. 2 for details.
Fig. 2
D
D/2
D/2
Rev 1.1 4
3. Secure Upper guide rail (01) and Bottom
guide rail (04) to the Glass profiles (03)
with the Flat head screws ST4.2x25 (09).
See Fig. 3 and Fig. 4 for details.
Fig. 3
Fig. 4
1
2
3
4
Rev 1.1 5
4. Push the Wall profiles (02) all the way over the Glass
profiles (03) at both sides. Make sure the flange of the
wall profile faces inside the shower.
See Fig. 5 and Fig. 6 for details.
Fig. 5
Fig. 6
1
2
Rev 1.1 6
5. Move the finished frame to the
designated position and push it against
the walls. If your top and bottom wall
opening measurements are different or if
the walls are out-of-plumb, make
adjustment by slightly pulling the Wall
profiles out of the Glass Profiles.
Use the level to adjust the frame in the
vertical position.
See Fig. 7 for details.
Fig. 7
6. Using help to hold this frame in the right
position, mark the drill holes on the wall
through the holes on the flange of the
Wall Profile.
Gently set the assembled unit aside; drill
the holes using Ø 5/16” drill bit and
insert the Wall anchors (07).
See Fig. 8 for details.
Fig. 8
4
3
2
1
Ø 5/16”
Rev 1.1 7
7. Apply silicone along the wall profile and around the
holes on the wall. Also apply silicone under the bottom
guide rail. Place the shower frame back in to the
designated position and secure it to the walls using
Round head screws ST4.2×30 (09).
See Fig. 9 for details.
Fig. 9
8. Secure the Rollers (11) to the top of
the Glass door (05). Mind the position
of the rollers.
Attach the Handle brackets (12) to the
Glass doors (A & B). The handle
brackets should face the same direction
as the rollers. Then secure the Handles
(06) to the Handle brackets using
Round head screw ST4.2×16 (08).
Cover the holes with the Decorative
cover provided.
See Fig. 10 for details.
Fig. 10
1
2
4
3
2
1
Rev 1.1 8
PLEASE NOTE:
•On the outside Glass door (A) the Handle and the
Rollers should face out.
•On the inside Glass door (B) the Handle and the Rollers
should face inside.
See Fig. 11 and Fig. 12 for details.
Fig. 11
Fig. 12
A
B
Rev 1.1 9
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Dreamline Cabine de douche
Dreamline
Dreamline HORIZON Manuel utilisateur
Dreamline
Dreamline UNIDOOR MADRID D245872MB01 Series Manuel utilisateur
Dreamline
Dreamline MIRAGE-X SHDR-1948723L Series Manuel utilisateur
Dreamline
Dreamline FLEX Manuel utilisateur
Dreamline
Dreamline MYSTERIE SHDR-61AMZ48 Series Manuel utilisateur
Dreamline
Dreamline ENIGMA-X Manuel utilisateur
Dreamline
Dreamline SPARKLE Manuel utilisateur
Dreamline
Dreamline ENIGMA AIR SHEN-6434480 Series Manuel utilisateur
Dreamline
Dreamline Prism DLT-1132320 Manuel utilisateur
Dreamline
Dreamline SHEN-1332460 Series Manuel utilisateur
Dreamline
Dreamline Elegance Manuel utilisateur
Dreamline
Dreamline AQUA-Q SWING SD-373472Q Series Manuel utilisateur
Dreamline
Dreamline Oceana DLG-63 Manuel utilisateur
Dreamline
Dreamline SHDR-22287200-01 Manuel utilisateur
Dreamline
Dreamline LINEA SHDR-3230721 Series Manuel utilisateur
Dreamline
Dreamline UNIDOOR PLUS STYLE F Manuel utilisateur
Dreamline
Dreamline Charisma SHDR-1348760 Series Manuel utilisateur
Dreamline
Dreamline ENIGMA SHDR-6060791272 Manuel utilisateur
Manuels Cabine de douche populaires d'autres marques
US HORIZON
US HORIZON SORRENTO Series Manuel utilisateur
Arblu
Arblu PERSEO ANGOLO Q-R 2SL+1LF Guide d'installation
Novellini
Novellini R90 base p.80 Manuel de service
SANPLAST
SANPLAST KP1DJa/TX5b Manuel utilisateur
Insignia
Insignia 9015 Manuel utilisateur
Kohler
Kohler Sterling 2375 Series Manuel utilisateur