Draytek VigorAP 1062C Manuel utilisateur

VigorAP 1062C

802.11ax Ceiling-mount Access

Point

Quick Start Guide

Version: 1.0_(draft)

Firmware Version: V1.4.0

(For future update, please visit DrayTek web site)

Date: July 12, 2022

Intellectual Property Rights (IPR) Information

Copyrights

by copyright. No part may be reproduced, transmitted, transcribed, stored in

a retrieval system, or translated into any language without written permission

from the copyright holders.

Trademarks

The following trademarks are used in this document:

Microsoft is a registered trademark of Microsoft Corp.

Windows, Windows 8, 10, 11 and Explorer are trademarks of Microsoft

Corp.

Apple and Mac OS are registered trademarks of Apple Inc.

Other products may be trademarks or registered trademarks of their

respective manufacturers.

Safety Instructions and Approval

Safety

Instructions

Read the installation guide thoroughly before you set up the device.

The device is a complicated electronic unit that may be repaired only be

authorized and qualified personnel. Do not try to open or repair the

device yourself.

Do not place the device in a damp or humid place, e.g. a bathroom.

Do not stack the devices.

The device should be used in a sheltered area, within a temperature

range of 0 to +45 Celsius.

Do not expose the device to direct sunlight or other heat sources. The

housing and electronic components may be damaged by direct sunlight

or heat sources.

Do not deploy the cable for LAN connection outdoor to prevent

electronic shock hazards.

Keep the package out of reach of children.

When you want to dispose of the device, please follow local regulations

on conservation of the environment.

Warranty

We warrant to the original end user (purchaser) that the device will be free

from any defects in workmanship or materials for a period of one (1) year from

the date of purchase from the dealer. Please keep your purchase receipt in a

safe place as it serves as proof of date of purchase. During the warranty

period, and upon proof of purchase, should the product have indications of

failure due to faulty workmanship and/or materials, we will, at our discretion,

repair or replace the defective products or components, without charge for

either parts or labor, to whatever extent we deem necessary tore-store the

product to proper operating condition. Any replacement will consist of a new

or re-manufactured functionally equivalent product of equal value, and will

be offered solely at our discretion. This warranty will not apply if the product

is modified, misused, tampered with, damaged by an act of God, or subjected

to abnormal working conditions. The warranty does not cover the bundled or

licensed software of other vendors. Defects which do not significantly affect

the usability of the product will not be covered by the warranty. We reserve

the right to revise the manual and online documentation and to make changes

from time to time in the contents hereof without obligation to notify any

person of such revision or changes.

Declaration of Conformity

Hereby, DrayTek Corporation declares that the radio equipment type VigorAP 1062C is in compliance

with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address:

https://fw.draytek.com.tw/VigorAP 1062C/Document/CE/

Manufacturer: DrayTek Corp.

Address: No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan

Product: VigorAP 1062C

Frequency Information for Europe area:

2.4G WLAN

2412MHz - 2472 MHz, max. TX power: 19.95 dBm

5G WLAN

5160MHz - 5340 MHz, max. TX power: 22.84 dBm ;

5480MHz - 5720 MHz, max. TX power: 28.14 dBm

Requirements in AT/BE/BG/CZ/DZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/

CY/LV/LI/LT/ LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/ UK/HR.

5150MHz~5350MHz is for indoor use only.

This product is designed for 2.4GHz and 5GHz WLAN network throughout the EC region.

Declaration of Conformity

Hereby, DrayTek Corporation declares that the radio equipment type VigorAP 1062C is in compliance

with Regulation SI 2017 No. 1206.

The full text of the UKCA Declaration of Conformity is available at the following internet address:

https://fw.draytek.com.tw/VigorAP 1062C/Document/UKCA/

Manufacturer: DrayTek Corp.

Address: No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan

Product: VigorAP 1062C

Importer: CMS Distribution Ltd: Bohola Road, Kiltimagh, Co Mayo, Ireland

Frequency Information for UK area:

2.4G WLAN

2412MHz - 2472 MHz, max. TX power: 19.98dBm

5G WLAN

5160MHz - 5340 MHz, max. TX power: 22 dBm

5480MHz - 5720 MHz, max. TX power: 27 dBm

Requirements in UK. 5150MHz~5350MHz is for indoor use only.

This product is designed 2.4GHz and 5GHz WLAN network use in the UK & Ireland.

iii

Regulatory Information

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device may accept any interference received, including interference that may cause

undesired operation.

USA Local

Representative

Company name

ABP International Inc.

Address

13988 Diplomat Drive Suite 180 Dallas TX 75234

ZIP Code

75234

E-mail

[email protected]

Contact Person

Mr. Robert Messer

Tel.

19728311600

Caution

Any changes or modifications not expressly approved by the grantee of this device could void the

user's authority to operate the equipment.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

External Power Supply ErP Information

Manufacturer

DVE

AMIGO

Address

No.5, Baogao Rd,

Xindian Dist, New

Taipei City (23144),

Taiwan

No.5, Baogao Rd,

Xindian Dist, New

Taipei City (23144),

Taiwan

No.20, Qianyang First

Road, Yun-Mao-Tsun,

San Xing, Zhongshan,

Guangdong, China

Model identifier

DSA-12PF09-12 FUK

DSA-18PFR-12 FUK

AMS2000-1202000FV

DSA-12PF09-12 FEU

DSA-18PFR-12 FEU

AMS2000-1202000FB

Input voltage

100~240V

Input AC frequency

50/60Hz

Output voltage DC

12.0V

12V

Output current

1.0A

1.5A

Output power

12.0W

18.0W

24.0W

Average active efficiency

83.3%

85.5%

86.2%

Efficiency at low load 10%

80.8%

83.7%

79.1%

No-load power consumption

0.06W

0.07W

0.10W

*The external power supply used for each product will be model dependent.

For more update, please visit www.draytek.com.

1. Package Content .................................................................................................. 1

2. Panel Explanation................................................................................................. 2

3. Installation............................................................................................................. 3

3.1 Ceiling-mount Installation (Wooden Ceiling).............................................................................. 3

3.2 Ceiling-mount Installation (Plasterboard Ceiling)....................................................................... 4

3.3 Suspended Ceiling Installation................................................................................................... 5

4. Connection and Configuration............................................................................ 7

4.1 Notifications for Hardware Connection....................................................................................... 7

4.2 Web Configurations.................................................................................................................... 8

5. Customer Service............................................................................................... 10

Be a Registered Owner.................................................................................................................. 10

Firmware & Tools Updates ............................................................................................................. 10

Take a look at the package content. If there is anything missed or damaged,

please contact DrayTek or dealer immediately.

VigorAP 1062C Main Unit

Quick Start Guide

Kits & Screws

(Used for T-Rail Mounting)

Screws

(Used for Ceiling Mounting)

RJ-45 Cable (Ethernet)

Ceiling Mount Bracket

The type of the power adapter depends on the country that the AP will be

installed:

UK-type Power Adapter

EU-type Power Adapter

USA/Taiwan-type Power Adapter

AU/NZ-type Power Adapter

The maximum power consumption is 23 Watt.

LED

Status

Explanation

Blue LED

The system is in boot-loader mode.

Blinking

The system is in TFTP mode.

Green LED

Blinking

The system is in AP mode and work normally.

Red LED

Blinking

System error.

Off

VigorAP is turned off or not functioning.

Interface

Explanation

Ethernet Port

Connects to LAN or router.

Supports PoE power & Gigabit (2.5G).

Power Jack (DC IN)

Connecter for a power adapter.

Hole

Explanation

Factory Reset

Restores the unit back to factory default settings.

To use, insert a small item such as an unbent

paperclip into the hole. You will feel the button

inside depress gently. Hold it for 5 seconds.

The VigorAP will restart with the factory default

configuration and the LED will blink blue.

LED

Factory

Reset

VigorAP can be installed under certain locations: wooden ceiling, plasterboard

ceilings, light-weighted steel frame and wall.

-m

(

)

i. Place the bracket under the wooden ceiling and fasten four screws firmly.

ii. When the bracket is in place, fasten two screws firmly on the bottom of

VigorAP.

iii. Secure the access point firmly in place using the included screw as shown in

step iii.

Bracket

-m

(

)

i. Drill four holes in your ceiling using the ceiling mount bracket as a guide, and

insert the four included wall plugs/screw anchors (i).

ii. Align the ceiling mount bracket with your wall plugs/screw anchors and use

the four screws to fix it into place (ii).

iii. When the bracket is in place, fasten two screws firmly on the bottom of

VigorAP.

iv. Secure the access point firmly in place using the included screw as shown in

step iv.

Bracket

Table des matières

Autres manuels Draytek Point d'accès sans fil

Draytek

Draytek VigorAP 810 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur

Draytek

Draytek VigorAP 918R Series Manuel utilisateur

Draytek

Draytek VigorAP 710 Manuel utilisateur

Draytek

Draytek VigorAP 960C Manuel utilisateur

Draytek

Draytek VigorAP 910C Manuel utilisateur

Draytek

Draytek VigorAP 802 Manuel utilisateur

Draytek

Draytek VigorAP 700 Manuel utilisateur

Draytek

Draytek VigorAP 700 Manuel utilisateur

Draytek

Draytek VigorAP 960C Manuel utilisateur

Draytek

Draytek VigorAP 800 Manuel utilisateur

Draytek

Draytek VigorAP 810 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur

Draytek

Draytek VigorAP 910C Manuel utilisateur

Draytek

Draytek VigorAP 920C Manuel utilisateur

Draytek

Draytek VigorAP 1000C Manuel utilisateur

Draytek

Draytek VigorAP 802 Manuel utilisateur

Draytek

Draytek VigorAP 910C Manuel utilisateur

Draytek

Draytek VigorAP 810 Manuel utilisateur

Draytek

Draytek VigorAccess-A48M-2-SFP-A-1-AC Manuel utilisateur

Draytek

Draytek VigorAP 900 Manuel utilisateur

Draytek

Draytek VigorAP 910C Manuel utilisateur

Draytek

Draytek VigorAP 903 Manuel utilisateur

Draytek

Draytek VigorAP 1060C Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur