Draytek VigorSwitch G1241 Manuel utilisateur

Quick Start Guide

European Community Declarations

Manufacturer: DrayTek Corp.

Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial

Park, Hsin-Chu, Taiwan 303

Product: VigorSwitch G1241

DrayTek Corp. declares that VigorSwitch G1241 is in compliance with the

following essential requirements and other relevant provisions of 2004/108/EC.

The product conforms to the requirements of Electro-Magnetic Compatibility

(EMC) Directive 2004/108/EC by complying with the requirements set forth in

EN55022/Class A and EN55024/Class A.

The product conforms to the requirements of Low Voltage (LVD) Directive

2006/95/EC by complying with the requirements set forth in EN60950-1.

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a class

A computing device pursuant to Subpart J of part 15 of FCC Rules, which are

designed to provide reasonable protection against such interference when

operated in a commercial environment.

All trade names and trademarks are the properties of their respective companies.

Version: 1.0

Date: September 16, 2014

Package Content

The 24-port Gigabit Web Smart Switch is a standard switch that meets all

IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. The switch has 24

10/100/1000Mbps TP ports.

The network administrator can logon the switch to monitor, configure and

control each port’s activity. In addition, the switch implements the QoS

(Quality of Service) and VLAN. It is suitable for office application.

VigorSwitch Rack Mount Kit Quick Start Guide

and CD

The type of the power cord depends on the country that the switch will be

installed:

UK-type power cord EU-type power cord USA-type power cord

Note: If any of these items is found missing or damaged, please contact

your local supplier for replacement.

Descriptions of Panel

LED Explanation

LED Color Explanation

Steady Green The switch is powered on.

PWR Off The switch is powered off.

Steady Green The switch is on and functioning properly.

Blinking Green The switch is rebooting and performing self-diagnostic tests.

SYS Off The power is off or the system is not ready / malfunctioning.

Steady Green The link to a 10/100/1000 Mbps Ethernet network is up.

Blinking Green The system is transmitting / receiving to/from a 10/100/1000

Mbps Ethernet network.

Link/ACT

Off Port disconnected.

Connector Explanation

Interface Description

Reset Button Reset the switch to its factory default configuration via the

RESET button. Press the RESET button for three seconds

and release. The switch automatically reboots and reloads its

factory configuration file. The RESET button is on the front

panel of the switch.



Installing Your Switch

A hierarchical network with minimum levels of switch may reduce the timing

delay between server and client station. Basically, with this approach, it will

minimize the number of switches in any one path; will lower the possibility of

network loop and will improve network efficiency.

If more than two switches are connected in the same network, select one switch

as root switch and connect all other switches to it. This is general if no VLAN or

other special requirements are applied.

All switch ports are in the same local area network.

(*The switch image is sample only)

For other examples of hardware installation, please refer to User’s Guide for

detailed information.

Autres manuels pour VigorSwitch G1241

Table des matières

Autres manuels Draytek Changer

Draytek

Draytek VigorSwitch V1281 Manuel utilisateur

Draytek

Draytek Vigor 3300 Series Guide de référence

Draytek

Draytek VigorSwitch G2121 Manuel utilisateur

Draytek

Draytek VigorSwitch G1280 Manuel utilisateur

Draytek

Draytek VigorSwitch P1100 Manuel utilisateur

Draytek

Draytek VigorSwitch P1282 Manuel utilisateur

Draytek

Draytek VigorSwitch P1280 Manuel utilisateur

Draytek

Draytek VigorSwitch PQ2121x Manuel utilisateur

Draytek

Draytek VigorSwitch P2100 Manuel utilisateur

Draytek

Draytek VigorSwitch G1080 Manuel utilisateur

Draytek

Draytek VigorSwitch G1240 Manuel utilisateur

Draytek

Draytek VigorSwitch P1085 Manuel utilisateur

Draytek

Draytek VigorSwitch G2540xs Manuel utilisateur

Draytek

Draytek VigorSwitch FX2120 Manuel utilisateur

Draytek

Draytek VigorSwitch P1280 Manuel utilisateur

Draytek

Draytek VigorSwitch P2121 Manuel utilisateur

Draytek

Draytek Vigor 3300 Series Manuel utilisateur

Draytek

Draytek VigorSwitch G1260 Manuel utilisateur

Draytek

Draytek VigorSwitch Q2200x Manuel utilisateur

Draytek

Draytek VigorSwitch P1282 Manuel utilisateur

Draytek

Draytek VigorSwitch G1241 Manuel utilisateur

Draytek

Draytek P2261 Manuel utilisateur

Draytek

Draytek VigorSwitch G2080 Manuel utilisateur

Draytek

Draytek VigorSwitch P2260 Instructions d'utilisation d'origine

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur