Dräger Interlock 7000 Manuel utilisateur

Dräger Interlock® 7000

User Guide

Victoria’s Alcohol Interlock Program

D-6664-2014

WHAT IS THE DRÄGER INTERLOCK 7000?

The Dräger Interlock® 7000 is a reliable and precise

alcohol measuring instrument with integrated vehicle

immobiliser. It prevents a person under the influence

of alcohol from starting the vehicle. The Dräger

Interlock® 7000 consists of two components:

handset and control box. If required, the device

can be additionally equipped with a camera.

HOW DOES THE DRÄGER INTERLOCK 7000 WORK?

Before you can start the engine, the device measures

the alcohol content in your breath. When no alcohol

is detected, you can drive, however, if alcohol is

detected, you will not be able to start your vehicle.

Retests are required while driving and are carried out

at random intervals. The Dräger Interlock® 7000 does

not interfere with a running engine. Therefore, your

driving will not be disrupted by the device.

The Dräger Interlock® 7000 can differentiate

between mouth alcohol and breath alcohol. Mouth

alcohol caused by food and beverages that contain

small amounts of alcohol can affect the test result.

You cannot start the vehicle for a pre-defined period

of time if a certain breath alcohol concentration is

detected.

The Dräger Interlock® 7000 records all alcohol

readings, vehicle starts, engine shut-offs and

violations. This data is downloaded at each

monthly service and sent to VicRoads for review.

IMPORTANT TO KNOW

–Keep the unit clean and dry at all times.

–Use a clean and dry mouthpiece when providing

breath samples.

–Do not eat, consume alcohol, use alcohol based

products, including mouthwash or smoke for 15

minutes before using the Dräger Interlock® 7000.

–Alcohol can continue to rise for up to 2 hours after

your last drink and it can take further 10 hours for

your body to return to a zero reading after large

volumes have been consumed.

–Make sure ambient air does not contain alcohol or

solvent vapours, e.g. air fresheners.

–Ensure that the breath test is provided from the

driver’s seat in order for the test to be accepted.

–Avoid placing the Dräger Interlock® 7000 on the

vehicle floor. If the device is not secured, it may

interfere with the pedals and the safe operation of

the vehicle.

–You must not use the Dräger Interlock® 7000

while driving. If you are asked for a breath test,

you have 5 minutes to pull over and present the

breath test. Do not turn the vehicle off.

–It is not allowed to tamper with, abuse, misuse

and/or neglect the Dräger Interlock® 7000 or

the Dräger Interlock® 7000 camera.

–Contact your Service Agent with any questions

of concern.

HOW DO I START THE VEHICLE?

1. Wait 15 minutes after eating, drinking, smoking

or using alcohol based products.

2. Ensure a clean mouthpiece is inserted properly

into the Dräger Interlock® 7000.

3. Switch the ignition on.

4. The display will show “Ready for test – Please

blow”.

5. Take a deep breath and blow steadily into the

mouthpiece.

6. During the test you will hear the device clicking

three times. When you hear the third click, briefly

suck in some air. The coloured LEDs and the

display will indicate that the breath test is complete.

The Dräger Interlock® 7000 will display the following

messages if the blow pattern is correct:

–“Test passed” – A green LED confirms the result

and the vehicle can be started.

–“Test failed” – A red LED confirms the result. In

this case, the vehicle cannot be started.

WHAT IF I FAIL THE INITIAL TEST?

After a failed initial breath test due to detection of

alcohol, the vehicle will not start and a “Temporary

Lockout” will be activated.

A countdown will show on the display the amount

of time remaining before another breath test can be

presented. Once the temporary lockout period has

expired, repeat steps 3 – 6 under “How do I start

the vehicle” to present another breath test.

In case mouth alcohol is detected, the message

“Interferent detected – Repeat test” will appear.

Press the “OK” button to take a new test.

HOW DO I KNOW IF I AM BLOWING AND SUCKING

CORRECTLY?

The Dräger Interlock® 7000 will let you know if you

are not presenting a correct sample. If an error

occurs during the breath test, the device will alert

you with audible and visual signals. If you hear a

beep during the measurement, stop blowing and

look at the display. The following guidelines will help

you to find and eliminate the problem:

–“Blow longer!” – You need to blow longer.

–“Blow stronger!” – You need to blow harder.

–“Suck after blow” – You did not suck back

correctly.

Press the “OK” button to take a new test.

BREATH TESTS WHILST DRIVING

The Dräger Interlock® 7000 will ask for random

breath test, “Rolling Retests”, while you are driving.

When a retest is due, the unit will beep and the blue

light will flash. The display will read “Retest required –

Please blow.”

–Pull over, out of traffic when it is safe to do so.

–Don’t panic – You have 5 minutes to provide the

breath sample.

–There is no need to turn the vehicle off.

–Take the breath test as you would to start your

vehicle.

–Once you see “Test passed” on the display,

secure the device and continue your trip.

If you fail or do not provide a retest within the 5 minute

frame, the vehicle’s horn will sound and lights will

flash. You must pull over out of traffic and turn your

vehicle off to deactivate the vehicle’s horn and lights.

If a retest is failed, the Dräger Interlock® 7000 will

start a 30 minute lockout period.

VIOLATION RESET

Excessive violations will cause the Dräger Interlock® 7000

to require a service earlier than scheduled.

A “VIOLATION RESET” can be caused by:

–Failed rolling retests.

–Rolling retests that are not presented within

5 minutes.

–Battery disconnection more than 20 minutes.

–Tampering with the Dräger Interlock® 7000.

–Trying to circumvent the Dräger Interlock® 7000.

If you see “Device Lockout in XX days”, you need

to contact your Service Agent to have the Dräger

Interlock® 7000 serviced. Failure to do this within the

displayed time will result in a permanent lockout.

For example, you may be due for a service in 18 days,

but a violation caused by continually ignoring the

Rolling Retest request has brought your service date

forward to 7 days. You will see “Device Lockout in

XX day(s)” displayed on the handset. In this situation,

you must call your Service Agent and make an

appointment within that time or the Dräger

Interlock® 7000 will be in a permanent lockout.

SERVICE REQUIREMENTS

The Dräger Interlock® 7000 must be serviced every

month. The following services are included in your

monthly fees and will occur at each service:

–Check seals for tampering.

–Check for misuse, abuse or neglect of the unit.

–Download of data for VicRoads.

–Test equipment is functioning correctly.

This will take about 15 minutes to complete

(20 minutes if a calibration is required).

Your scheduled services will be set to the day of

installation for each month, called the anniversary

date. For example, if the Dräger Interlock® 7000 is

installed on the 23rd of January, the next service

date will be set to the 23rd of every month.

At each service, your next anniversary date will be

programmed into the Dräger Interlock® 7000. The

display will show a reminder message 7 days before

your service is required, warning you that the Dräger

Interlock® 7000 is due.

You are given an additional 7 days grace after your

service date. If your alcohol interlock is not serviced

within this time, it will enter into a permanent lockout

state.

A permanent lockout will require you to either have

your vehicle towed to the Service Centre or request a

Service Unlock Code. Both will be at your expense.

EMERGENCY CONTACTS

All calls are logged, and resulting actions recorded.

Please note that emergency calls resulting from

actions caused by you acting outside the parameters

of the program will be at additional costs and

payment prior to a service will be requested.

Only services relating to faulty equipment or

installation, where evidence of tampering, misuse,

abuse, neglect or vehicle accident is not apparent

will be free of charge. However, it is your

responsibility to bring the vehicle with the

Dräger Interlock® 7000 to the Service Centre.

Draeger Australia Pty. Ltd.

8 Acacia Place

Notting Hill VIC 3168 Australia

Phone 1300 780 689

Fax +61 3 9265 5166

[email protected]

www.draeger.com/Interlock7000

DSP-ITL-066, Rev 3

For service appointments or emergencies, please

contact your local Dräger authorised Service Agent on:

90 71 656 | 15.02-1 | Communications & Sales Marketing | PP | LE | Printed in Germany |

Autres manuels pour Interlock 7000

Table des matières

Autres manuels Dräger Équipement de test

Dräger

Dräger Alcotest 7510 Manuel d'instructions

Dräger

Dräger Interlock 5 00 Series Manuel utilisateur

Dräger

Dräger Alcotest 7510 Manuel d'instructions

Dräger

Dräger Interlock 7500 Manuel utilisateur

Dräger

Dräger Aerotest Simultan HP Manuel utilisateur

Dräger

Dräger Alcotest 3820 Manuel utilisateur

Dräger

Dräger Alcotest 5000 Manuel utilisateur

Dräger

Dräger Aerotest 5000 Manuel utilisateur

Dräger

Dräger Alcotest 5000 Manuel utilisateur

Dräger

Dräger Alcotest 6810 med Manuel utilisateur

Dräger

Dräger Alcotest 7000 med Manuel utilisateur

Dräger

Dräger Alcotest 9510 Standard IR Manuel utilisateur

Dräger

Dräger Interlock 7000 Manuel d'utilisation

Dräger

Dräger Alcotest 3000 Manuel utilisateur

Dräger

Dräger Alcotest 7510 Manuel utilisateur

Dräger

Dräger Quaestor 5000 Manuel utilisateur

Dräger

Dräger Alcotest 7000 Manuel utilisateur

Dräger

Dräger Alcotest 9510 Manuel utilisateur

Dräger

Dräger Alcotest 5000 Manuel utilisateur

Dräger

Dräger FS 1100 Manuel utilisateur

Dräger

Dräger Alcotest 3820 Manuel utilisateur

Dräger

Dräger 8103530 Manuel utilisateur

Dräger

Dräger Alcotest 7000 Manuel utilisateur

Dräger

Dräger Alcotest 5000 Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur