Dormakaba RTS88 Manuel utilisateur

RTS Series Package 26

With slotted angle bracket

Offset slide arm aluminum door and frame - pivots

Installation instructions

08279471 – 02-2020

| EN |

2RTS88 Closers 02-2020

08279471

dormakaba RTS88 Package 26 with Slotted Angle Bracket

Installation Instructions

Table of Contents

Table of contents

1 Installation instructions 3

1.1 Prepare frame and install closer 3

1.2 Prepare top of door 4

2 Adjustments 5

2.1 Adjust closing speeds 5

2.2 Optional 8511 applied stop (or stop by others) 5

dormakaba RTS88 Package 26 with Slotted Angle Bracket

Installation Instructions

08279471 02-2020RTS88 Closers 3

Frame

Closer

. Prepare frame and install closer

1 Installation instructions

Fig.

1.1.1 Prepare header and side jamb according to

template.

1.1.2 Fasten mounting bracket to side jamb with

three No. 8-32 pan head machine screws.

1.1.3 Fasten header to mounting bracket with two

No. 10-32 flat head machine screws.

1.1.4 Fasten angle bracket to closer with two hex

head machine screws and flat washers.

1.1.5 Install 2 fillister head machine screws into

mounting tabs on closer; make approximately 3

turns.

1.1.6 Install closer into header by inserting

mounting tabs into mounting bracket.

1.1.7 Raise end of closer with angle bracket.

1.1.8 Fasten angle bracket with the two 1/4-20 pan

head machine screws.

1.1.9 Closer should remain centered in header.

1.1.10 Tighten the 2 fillister head machine screws

securely.

1.1.11 Install cover plate by sliding tab into frame.

1.1.12 Fasten opposite end to mounting bracket with

two No. 8-32 flat head machine screws.

Header

Side

jamb

Mounting

bracket

Angle bracket

Fillister head

machine

screws (x2)

Closer

Cover plate

105

dormakaba RTS88 Package 26 with Slotted Angle Bracket

Installation Instructions

08279471 02-2020RTS88 Closers

Top of door

. Prepare top of door

Fig.

1.2.1 Prepare top of door according to template.

1.2.2 Assemble shock spring.

1.2.3 Slide assembled shock spring into track so end

with screw faces the 90° and 105° markings on

the track.

1.2.4 Align edge of shock spring assembly to coincide

with 90° or 105° deadstop in closer.

1.2.5 Secure shock spring assembly to track with

button head machine screw and 1/8” hex

wrench.

1.2.6 Insert slide block pin through slide block before

inserting slide block into track.

1.2.7 Fasten track to door with four No. 10-32 flat

head machine screws.

1.2.8 Slide arm onto spindle as shown, and tighten

the 1/4-20 socket head cap screw securely.

1.2.9 Position door at approximately 45° of opening.

1.2.10 Preload arm to a position where the hole in

arm aligns with slide block pin.

1.2.11 Thread slide block pin into arm wiht 3/16” hex

wrench.

1.2.12 TIGHTEN SECURELY!

Header

Side

jamb

Button

head

machine

screw

Closer

Cover plate

Slide block pin

(not shown)

Slide block

No. 10-32 flat

head machine

screws

Arm

1/4-20

socket head

cap screw

Shock spring

Track

Applied stop

Shock spring Track

105

90° shock spring

setting shown

dormakaba RTS88 Package 26 with Slotted Angle Bracket

Installation Instructions

08279471 02-2020RTS88 Closers 5

Adjustments - closing speeds

8511 applied stop

2 Adjustments

2.1.1 Valve “A” - controls closing speed from

maximum opening angle to 0°.

• Clockwise - decreases closing speed

• Counter-clockwise - increases closing speed

2.1.2 Valve “B” - increases closing speed from

maximum openig angle to 20°.

Counter-clockwise - increases closing speed.

Valve “B”

“A”

“B”

Valve “A”

. Adjust closing speeds

Fig.

. Optional  applied stop (or stop by others)

Fig.

2.1.1 Prepare header according to template above. 2.1.2 Install applied stop as shown in Fig 2. with

three No. 10-32 flat head machine screws.

1”

[25]

1”

[25]

1/8”

[3]

2”

[51]

Clearance

Front view

Bottom view

Cutout in stop

For 10-32 machine screws use No.21

drill and tap

One hole in cover plate

Two holes in frame

8511 applied stop

1-1/4”

[32] 7/8”

[22]

14-1/4”

[362]

1/2”

[13] 17-1/2”

[445]

35”

[889]

Side view

www.dormakaba.us

dormakaba

DORMA USA, Inc.

T: 800-523-8483

Autres manuels pour RTS88

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Dormakaba Système d'ouverture de porte

Dormakaba

Dormakaba UNIVERSAL PT 60 Manuel utilisateur

Dormakaba

Dormakaba ED250 Manuel utilisateur

Dormakaba

Dormakaba PT 22 Manuel utilisateur

Dormakaba

Dormakaba TS93 Series Manuel utilisateur

Dormakaba

Dormakaba Muto Premium XL80 Manuel utilisateur

Dormakaba

Dormakaba ED100 Manuel utilisateur

Dormakaba

Dormakaba 8956 T PKT90 Manuel utilisateur

Dormakaba

Dormakaba Best SL6000 SIS Manuel utilisateur

Dormakaba

Dormakaba FFT FLEX Green Manuel d'installation et d'exploitation

Dormakaba

Dormakaba ED50 Manuel utilisateur

Dormakaba

Dormakaba ED100 Manuel utilisateur

Dormakaba

Dormakaba 8900 FH Manuel utilisateur

Dormakaba

Dormakaba ED 100 LE Manuel utilisateur

Dormakaba

Dormakaba G-EMF Series Manuel utilisateur

Dormakaba

Dormakaba ED 250 LE Manuel utilisateur

Dormakaba

Dormakaba TS 97 FL XEA Manuel utilisateur

Dormakaba

Dormakaba 8900 T Manuel utilisateur

Dormakaba

Dormakaba UNIVERSAL GK 50 Manuel utilisateur

Dormakaba

Dormakaba 7400 SIS Manuel utilisateur

Dormakaba

Dormakaba ES 200 EASY PLUS Manuel utilisateur

Dormakaba

Dormakaba TS 98 XEA Manuel utilisateur

Dormakaba

Dormakaba RTS Series Manuel utilisateur

Dormakaba

Dormakaba ED50 Manuel utilisateur

Dormakaba

Dormakaba ED50 Manuel utilisateur

Manuels Système d'ouverture de porte populaires d'autres marques

Pamex

Pamex KT-INP35 Manuel utilisateur

Label

Label NEPTIS/LE Manuel utilisateur

Cal-Royal

Cal-Royal N-F77CVR Manuel utilisateur

Scrigno

Scrigno OPEN1000 Manuel utilisateur

TriMark

TriMark UM 34 Manuel utilisateur

BFT

BFT WIND RMB 130B 200 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Besam

Besam Swingmaster MP Mode d’emploi

CRL

CRL SENIOR PRIMA Manuel utilisateur

Assa Abloy

Assa Abloy SARGENT 1431 Series Manuel utilisateur

GAL

GAL MOVFR Fiche technique

Olide

Olide 120B Manuel utilisateur

Normstahl

Normstahl IDO7 Manuel utilisateur

Häfele

Häfele Finetta T 70 VF Manuel utilisateur

AGS

AGS D-PL Manuel

Stanley

Stanley MA900ñ Instructions d'installation

WITTUR

WITTUR Hydra Plus UD300 Manuel

Alutech

Alutech TR-3019-230E-ICU Instructions d'installation et d'utilisation