Dok CR32 Manuel utilisateur
CR32
SCD (Smart Current Detection) Technology Charge 4 Devices While Holding 3 in Cradles
FM Clock Radio With Alarm LED Night Light
Universal Multi-
Charging Station
Tablets & MIDs
Features
01
Contents
Thank you for purchasing our product. For operation and security, read this manual
carefully and keep it handy for future reference.
Charge any 4 portable devices at once
• Features SCD Technology
Smart Current Detection ensures proper device protection by adjusting the
current flow needed to each device.
• Charges 4 Devices, 3 in Cradles
Charge any 4 devices, with capability of 3 standing upright, simultaneously.
• FM Clock Radio Alarm
Listen to FM radio or play music from your Smart device and still wake up with
Alarm Clock.
• LED Night Light
Contents............................................................................................................................................................................01
Features............................................................................................................................................................................01
Warnings and Precautions..............................................................................................................................................02
Important Safety Instructions.........................................................................................................................................03
......................................................................................................................04-09
What’s in the Gift box......................................................................................................................................................10
................................................................................................................................................11 12
...................................................................................................................................................................13
..............................................................................................................................................................13
................................................................................................................................................................13
Troubleshooting...............................................................................................................................................................17
Quick Start On Charging Your Device
Location of Functions -
Operations -16
Setting up the unit
Using the unit -16
Note: Charges all smart phones and tablets of 5V from 0~2.1A.
02
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MOISTURE AND CONDENSATION
If unit is exposed to moisture and extreme cold
temperatures, then moved to a warm environment,
condensation may form on internal components. Under
these circumstances, powering the unit on may cause
damage to the unit or cause harm to the user. Allow the
unit to stand in a warm environment for 1 to 3 hours and
allow the unit to air dry safely.
Main plug is used to disconnect device and it
should remain readily operable during intended
use. In order to disconnect the apparatus from the
mains completely, the mains plug should be
disconnected from the mains socket outlet
completely. (for apparatus with power cordset as
disconnect device)
Battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
Location of label on the apparatus if that label was
affixed under a lid or on the bottom of the
apparatus with a mass not exceeding 7kg.
SAFETY
When connecting or disconnecting the AC cord, grip
the plug and not the cord itself. Pulling the cord may
damage it and create a hazard.
When you are not going to use the unit for a long period
of time, disconnect the AC cord.
WHEN IN USE
Do not use this unit in extremely hot, cold, dusty, or
humid conditions.
Do not restrict the air flow of the unit by placing it on
carpet or covering.
FCC Information
This device complies with part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1). This device may not cause harmful interference.
(2). This device must accept any interference received,
including interference that may cause undesirable
operation.
WARNING: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or
moisture.
CAUTION: Use of controls or adjustments or
performance of procedures other than those
specified may result in hazardous radiation
exposure.
*Caution Marking and rating plate was
located at bottom enclosure of the apparatus
03
Quick Start On Charging Your Device
04
Remove items from package
OPEN
OPEN
Round Bottom Phones
Other Devices
Flat Bottom Phones
Tablets & MIDs
1. Connecting your devices and the unit;
a) Flip open back panel
b) Connect your device to a USB port
How to use the CR32 to charge your device
Install 2pcs of AAA batteries
Connect unit to power outlet
AC 100V~240V
For phones and
small devices, 4pcs of USB ports can be applied
Tablets must be connected to
these designated red USB ports
2. Connect your device to any of the 4 USB ports available
3. Wrap your cord:
"
7
~
"
6
e
v
a
L
e
05
Quick Start On Charging Your Device
(DC 5V/2.1A)
4. Your phone's shape will determine if an insert is needed. Use the insert for flat
bottom phones. Round bottom phones do not need the insert.
5. Wrap excess cable around cable organizer leaving enough cable to allow phone
to be inserted into cradle.
A
For FLAT bottom phones
a. For FLAT bottom phones
B
For ROUND bottom phones
1. PUSH
2. LOCK
Optional Insert
CLOSE
06
Quick Start On Charging Your Device
b. For ROUND bottom phones, take out the insert.
c. For other devices
1. PUSH
2. LOCK
CLOSE
CLOSE
Quick Start On Charging Your Device
07
d. For TABLETS & MIDs
1. PUSH
2. LOCK
CLOSE
AUX IN cable
AUX IN port is available to listen to any device's media.
Connect headphone jack to AUX IN with provided cable.
Close rear panel after connection is complete,
then put the device into the cradle.
08
Quick Start On Charging Your Device
09
Quick Start On Charging Your Device
6. Disconnect and leave the USB cord for easy re-connection
If necessary, disconnect your USB cable from your existing smart phone
power adaptor, then use the charging cable that comes with your phone.
NOTE: Old model phones may not come with a USB charging cable. Contact
your phone's service provider or review the cables available in this catalog.
Remove USB cable
from 120V adaptor
Table des matières
Autres manuels Dok Station d'accueil
