DNP QW410 Manuel utilisateur

QW410 Printer

Up & Running Guide

About your new QW410 printer!

Ultra Compact and Lightweight.

Weighing in at less than 13 lbs, it

is now easier for anyone to carry

this printer from event-to-event.

Its small size allows you to carry

it in standard shoulder bags.

Innovative Print Sizes. The

QW410 4.5” printhead and

superior electronics and

mechanisms allow for many print sizes for more fun and

enjoyment for your customers. The QHD 4.5x8” Pano Print

media allows for a unique print size, without the need for

cropping for 16:9 high denition aspect ratio shots, for example.

It can also print many other sizes and aspect ratios to give you

options that can make your event unique and fun…like 2x4”,

3x4”, 4x4”, 4x4.5”, among others.

Lay Flat Function. Equipped with an innovative mechanism that

reduces the curl of the print, if needed. This function will switch

on automatically as needed, or you can control it yourself.

Supports External Battery. This printer has big energy savings…

it uses 35% less energy and allows for battery-powered

operation that can operate an entire event!

Wireless Ready. With DNP supplied wireless options, the QW410

is compatible with the mobile and wireless world, supporting

macOS, iOS, and most other Wi operating environments.

DNP Quality. The QW410 may be small, but it delivers big on

DNP photo quality color prints, the quality you have come to

expect from DNP.

Printer Terms & Components

PAPER TRAY

PAPER SCRAP

BIN

RIBBON

COMPARTMENT

PAPER

COMPARTMENT

PAPER SPOOLS

(WITH SPACERS)

Connecting the Printer for the First Time

ATTENTION:

Save the original box and packaging material! You can

store the printer in the box when its not in use. You can

also use the box for transporting or shipping the printer.

1. Unpack your printer. Remove your new printer from the

shipping box. Remove any packaging material (plastic, tape,

etc.) from the printer.

2. Verify that you have the following components.

• (1) QW410 printer

• (1) Paper tray

• (2) Paper spools

• (2) Paper spool spacers

• (1) Printer power cord

• (1) USB Cable

NOTE:

You also need a box of QW410 printer media to use your

new printer!

3. Place your printer in the printing location. Set your printer

on a level, sturdy surface. Placing the printer on an unstable

surface could cause the printer to fall, cause you injury, or

damage the printer components during printing.

4. Install the printer driver. Go to the DNP website and

download the printer driver.

dnpphoto.com/en-us/QW410-Drivers-and-Firmware

Follow the onscreen prompts as you install the driver.

5. Connect your printer. Make

sure your printer is powered

OFF. Connect the power cord

to the printer (blue circle)

and plug it into a wall outlet.

Connect a USB cable to the

type-B USB port and to the

computer (yellow circle).

Power ON the printer and

computer.

6. If necessary, use the paper

spacers. If you’re using 4 inch paper, install the spacers so

the paper aligns with the print head for proper printing. The

spacers lock into place so that they do not move during use.

If you’re using 4.5 inch paper, do not use the spacers.

Replacing the Printer Paper

1. Empty the scrap bin. If you haven’t already, remove the

paper tray from the front of the printer. Remove the scrap

bin and throw away any scraps. Set the scrap bin aside.

2. Remove the old paper (if necessary). Remove the paper

spools from the paper compartment. Remove the old paper

from the spools and throw it away.

3. Prep the new paper roll. Open the printer media box and

remove a roll of paper. Remove the plastic but do not

remove the edge seal at this time. Check that the paper

edges are at and are not protruding from the center of the

roll. Place the new paper roll on the paper spools. Be sure

to press the spools against the paper roll to set the paper

tightly against the spools.

4. Orient the paper roll. Make sure

the paper roll is oriented so that

the leading edge of the paper

roll is coming over the top of the

paper roll and directed towards

the bottom of the paper roll.

5. Set the new paper roll in the

printer. Place the spool and new

paper roll in the printer paper

compartment. Remove the seal

on the paper. Advance the paper

so that the paper from the top to

the bottom of the roll and into

the printer paper compartment.

Continue feeding the paper until

the printer beeps. The ERROR LED

changes from ashing red and

orange to ashing red.

6. Replace the scrap bin. Reset the scrap bin in the printer.

NOTE:

The POWER LED light turns green when the ribbon,

paper, and scrap bin are properly installed. If the ERROR

LED ashes red, make sure ribbon, paper, and scrap bin

are properly seated.

7. Replace the paper tray. The paper tray can hold up to 20

prints. However, it is recommended that prints are removed

from the tray at regular intervals to prevent jams.

Replacing the Printer Ribbon

1. Press the button on the top of the printer to open the ribbon

compartment.

2. If an existing ribbon is in

place, remove the ribbon

and discard it.

3. Orient the new ribbon so

that the supply side (larger

side) is towards you and

the take-up side (smaller

side) is towards the back of

the printer.

4. Align the left sides of the ribbon with the grooves and then

lower the right sides of the ribbons until they click into place.

5. Remove any slack from the ribbon by rotating the ribbon

towards the supply side.

6. Close the ribbon compartment.

SUPPLY TAKE-UP

PLACE THIS

SIDE FIRST

PLACE THIS

SIDE SECOND

Questions about warranties, drivers, advanced printer features,

or other products? Look for the Welcome Card in your printer

box or get more information here:

dnpphoto.com/support

DNP Imagingcomm America Corp.

4524 Enterprise Dr. NW

Concord NC 28027

All particulars of the product and its use contained in the document are provided by DNP Imagingcomm America Corporation

(DNP IAM) in good faith. All warranties implied or expressed, including but not limited to implied warranties of merchantability,

or tness of purpose, are excluded. Neither the whole nor any part of the information contained in, or the product described in,

this document may be adapted or reproduced in any material form without the prior written authorization of DNP IAM.

Tomo™, Hot Folder Print™, PrintCenter™, DS-Series Printers™, and PrintTurbine™ are trademarks and NexLab® is a regi󰏭ered

trademark of DNP Imagingcomm America Corporation.

PrintRush® and Party Print® are regi󰏭ered trademarks of Dai Nippon Printing Company LTD. Other product names and

companies mentioned herein are the trademarks of their respective owners.

Autres manuels pour QW410

Table des matières

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur