DMP Electronics XRSuper6 Manuel utilisateur

QUICK REFERENCE

32-Character Display

Armed LED

Power LED

Data Entry Digit keys

COMMAND Key

Back Arrow Key

Select Keys

JONES RESIDENCE

FRI 12:51 PM

Backlit Logo

and Proximity

Antenna

1 2 3 4

9 0 CMD

5 6 7 8

Away

All Home

Monitor

(Chime)

Perimeter Sleep

Check-in Report

(Latch Key)

Sensor Reset

(Fire Reset)

Easy Exit

Keypad Key Arming System Operation

Press Key 1 Arm All or Away for Home/Sleep/Away systems

Press Key 2 Sensor (Fire) Reset on all systems

Press Key 3 Arm Home for Home/Sleep/Away systems

Press Key 4 Check-in Report on all systems

Press Key 5 Monitor (Chime) on all systems

Press Key 6 Arm Perimeter for All/Perimeter systems

Press Key 7 Arm Sleep for Home/Sleep/Away systems

Press Key 8 Easy Exit for Home/Sleep/Away systems

This quick reference guide is for use with DMP XT30/XT50 Series, XRSuper6, XR20 and XR40 panels.

800-641-4282

INTRUSION • FIRE • ACCESS • NETWORKS

www.dmp.com 2500 North Partnership Boulevard

Designed, Engineered and

Assembled in U.S.A. Springeld, Missouri 65803-8877

9101

Checking Zone status before

ARMING

If one or more zones are not in a normal condition, the keypad displays SYSTEM

NOT READY. Pressing any Select Key during this display shows the zone names that

are NOT READY.

ARM System 1. Enter your user code. The keypad displays ALL PERIM or HOME SLEEP AWAY

2. Select HOME or PERIM to arm the Perimeter only

3. Select SLEEP to arm the Perimeter and Interior (except bedroom areas).

4. Select ALL or AWAY to arm the Perimeter, Interior, and Bedroom.

5. If a problem exists on any zones, the zone name and problem display followed

by: OKAY BYPASS STOP.

a. Select OKAY to force arm the zone(s) before arming.

b. Select BYPASS to bypass the zone(s) before arming.

c. Select STOP to stop the system from arming. Correct and return to step 1.

6. The keypad next displays EXIT: ## INSTNT and begins to count down the number

of seconds remaining for you to exit.

7. You can select INSTNT while EXIT: ## INSTNT displays to immediately arm all

zones and remove entry/exit delay.

DISARM All Areas Enter your user code to disarm the system.

DISARM All Areas

(while in alarm)

1. Enter your user code

2. Keypad displays CANCEL VERIFY

3. If alarm is false, press Select key under CANCEL to cancel alarm.

4. If the alarm is valid or you are unsure of the cause of alarm, press the Select

key under VERIFY to alert the Monitoring Center that you verify the alarm they just

received.

Quick Arm HOME or PERIM Press Key 3 for 2 seconds to arm the perimeter.

Quick Arm AWAY or ALL Press Key 1 for 2 seconds.

Quick Arm SLEEP Press Key 7 for 2 seconds to arm the perimeter and interior areas and leave the

bedroom area off.

Turn Chime (monitor) on/off. Press Key 5 Chime (Monitor)

Sensor Reset

Press Key 2 for 2 seconds, then enter your user code if required to reset the system.

Your keypad may be congured to manually send a Panic, Emergency, or Fire alarm to the central station:

Police Alarm Press and hold the two Select keys adjacent to the Police button for 2 seconds,

until a beep from the keypad is heard.

Emergency Alarm Press and hold the two Select keys adjacent to the Emergency button for 2

seconds, until a beep from the keypad is heard.

Fire Alarm Press and hold the two Select keys adjacent to the Fire button for 2 seconds, until

a beep from the keypad is heard.

Top Row Select Keys

Police Emergency

Fire

Autres manuels pour XRSuper6

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels DMP Electronics Panneau de contrôle

DMP Electronics

DMP Electronics XR6 COMMAND PROCESSOR Manuel utilisateur

DMP Electronics

DMP Electronics XR550 series Manuel utilisateur

DMP Electronics

DMP Electronics XR150FC Series Manuel utilisateur

DMP Electronics

DMP Electronics SecurityCommand XR6 Manuel utilisateur

DMP Electronics

DMP Electronics XR100 Mode d'emploi

DMP Electronics

DMP Electronics XTLtouch Manuel utilisateur

DMP Electronics

DMP Electronics XT30INT Manuel utilisateur

DMP Electronics

DMP Electronics XT30 Series Manuel utilisateur

DMP Electronics

DMP Electronics XR200 Manuel utilisateur

DMP Electronics

DMP Electronics XT Series Mode d'emploi

DMP Electronics

DMP Electronics XRSuper6 Manuel utilisateur

DMP Electronics

DMP Electronics XR550 series Manuel utilisateur

DMP Electronics

DMP Electronics XTLC Mode d'emploi

DMP Electronics

DMP Electronics XT Series Fiche technique

DMP Electronics

DMP Electronics Addressable Fire Alarm Control Panel XR2500F Manuel utilisateur

DMP Electronics

DMP Electronics XT50 Series Manuel utilisateur

DMP Electronics

DMP Electronics XR6 COMMAND PROCESSOR Mode d'emploi

DMP Electronics

DMP Electronics XR550INT Series Manuel utilisateur

DMP Electronics

DMP Electronics XR200 Mode d'emploi

DMP Electronics

DMP Electronics XR150FC Series Manuel utilisateur

DMP Electronics

DMP Electronics XT Lite Manuel utilisateur

DMP Electronics

DMP Electronics XTLplus Manuel utilisateur

DMP Electronics

DMP Electronics XR150 series Manuel utilisateur

DMP Electronics

DMP Electronics XR150CAN Series Manuel utilisateur

Manuels Panneau de contrôle populaires d'autres marques

RDZ

RDZ PC-HRX Manuel utilisateur

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuel technique

Efka

Efka Variocontrol V810 Manuel utilisateur

Cebora

Cebora 208-10 Manuel utilisateur

AMX

AMX AutoPatch CP-15 Manuel utilisateur

Satel

Satel CA-6 KLED-S Manuel utilisateur

Evolution

Evolution IQ plus 800 Manuel utilisateur

Fagor

Fagor 8040 TCO CNC Manuel utilisateur

Trane

Trane ComfortLink II XL950 Control Manuel utilisateur

AKO

AKO PROCool AKO-17635-2 Manuel utilisateur

ABB

ABB 6136/30M-101 Manuel utilisateur

Telikou

Telikou BK-603 Belt Pack Manuel utilisateur

Mapei

Mapei Mapeheat Thermo Touch Manuel utilisateur

Bosch

Bosch D9412GV4 Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuel utilisateur

Sminn

Sminn BOX L VF1L EI Manuel utilisateur

Balboa

Balboa TP600 Manuel utilisateur

Nice

Nice HSCU1 Caractéristiques techniques