Dji Ronin SC2 Manuel utilisateur

v1.0

Quick Start Guide

Quick Start Guide 2

快速入门指南 12

快速入門指南 22

Panduan Mulai Cepat 26

クイックスタートガイド 30

퀵스타트 가이드 34

Panduan Mula Pantas 38

 42

Ръководство за бързо стартиране 46

Příručka pro rychlé spuštění 50

Hurtigstartvejledning 54

Kurzanleitung 58

Guía de inicio rápido 62

Οδηγός γρήγορης εκκίνησης 66

Pika-aloitusopas 70

Guide de démarrage rapide 74

Vodič za brzi početak rada 78

Rövid üzembe helyezési útmutató 82

Guida di avvio rapido 86

Snelstartgids 90

Hurtigstartveiledning 94

Skrócony przewodnik 98

Guia de início rápido 102

Guia de início rápido 106

Ghid de inițiere rapidă 110

Краткое руководство 114

Snabbstartsguide 118

Hızlı Başlangıç Kılavuzu 122

ﻊﻳﴪﻟﺍ ﻞﻴﻐﺸﺘﻟﺍ ﻞﻴﻟﺩ 126

PT-BR

Contents

CHS

CHT

DJI RSC 2 Quick Start Guide

DJI RSC 2 Overview

1. Tilt Motor

2. Tilt Lock

3. Screen

4. Side Dial

5. Camera Control Button

6. M Button

7. Joystick

8. Extended Grip/Tripod

9. Back Button

10. M4/NATO Port

11. Lock Knob

12. Lower Quick-Release Plate

13. Upper Quick-Release Plate

14. Image Transmission/Focus Motor Port

(USB-C)

15. Focus Motor Port (USB-C)

16. RSS Camera Control Port (USB-C)

17. Front Dial

18. Trigger

19. Power Button

20. Power Port (USB-C)

21. Pan Lock

22. Pan Motor

23. Roll Lock

24. Roll Motor

DJI RSC 2 Quick Start Guide

Getting Started

A. Downloading the DJI RONINTM App and Watching the Tutorials

B. Charging the Battery

Before using for the rst time, charge DJI RSC 2 through the power port using a charging

cable (included) and a USB adapter (not included). It is recommended to use a QC 2.0 or

PD (max. 18 W) USB adapter. Check the battery level on the screen.

C. Unfolding the Gimbal

Loosen the lock knob to the unlocked position, unfold the gimbal as shown, and tighten

the lock knob to the locked position.

Ronin App Tutorials

USB Power

Adapter

Power Outlet

100 - 240 V

Power Port

DJI RSC 2 Quick Start Guide

Tilt Lock

D. Attaching the Extended Grip/Tripod

E. Unlocking and Locking the Gimbal

To unlock the gimbal, toggle the tilt, roll, and pan lock levers to the unlocked position.

Adjust the gimbal position as shown and toggle the three locks to the locked position.

Pan Lock

Roll Lock

DJI RSC 2 Quick Start Guide

F. Powering On/O and Entering/Exiting Sleep Mode

Press and hold the power button to turn DJI RSC 2 on or o. Tap or press twice to enter

or exit sleep mode.

G. Activating DJI RSC 2

DJI RSC 2 needs to be activated through the Ronin app before using

for the rst time.

1. Press and hold the power button to power on the gimbal.

2. Enable Bluetooth on your mobile device and launch the Ronin app.

Note that a DJI account is required to launch the Ronin app. Once

detected in the list of Bluetooth devices, select DJI RSC 2 and input

the default Bluetooth password: 12345678. Make sure you are

connected to the internet and follow the on-screen instructions to

activate DJI RSC 2.

Mounting the Camera

Make sure to prepare the camera before mounting it to DJI RSC 2. Remove the lens cap and

check that the battery and memory card are inserted in the camera. Make sure DJI RSC 2 is

powered o or in sleep mode before mounting the camera.

1. Attach the Upper Quick-Release Plate

The camera lens and the arrow on the bottom of the upper quick-release plate must face

the same direction. Attach the upper quick-release plate to the camera by tightening the

screw.

A camera riser is required when using a focus motor or a small camera with a large lens, such as a

Sony A6400 with the Sony FE 24-70 f2.8 GM lens.

DJI RSC 2

Creat

User Proﬁle Status

Device Activation

Activation is required prior to using the

device. To do so, information regarding

your device and DJI account will be

uploaded to DJI. Please agree and

proceed to activation.

Agree and activate

DJI RSC 2 Quick Start Guide

2. Attach the Lower Quick-Release Plate and Lens Support

Toggle the lever on the lower quick-release plate to the unlocked position 1, insert the

camera 2, and toggle the lever to the locked position 3after it is engaged. Attach

the lens support to the lower quick-release plate 4. It is recommended to use the lens

support* when using a long or heavy lens.

To remove the camera from the lower quick-release plate, toggle the lever to the unlocked

position and remove the camera while pressing the safety lock beside the lever.

3. Attach the Camera to the Gimbal

Toggle the lever on the camera mounting plate to the unlocked position 1and insert the

lower quick-release plate 2. Toggle the lever to the locked position once the camera is

roughly balanced 3.

* The Lens-Fastening Strap (not included) is required to use SuperSmooth mode.

The position of the camera mounting plate can be adjusted by toggling the lever on the bottom as

desired.

Safety Lock

DJI RSC 2 Quick Start Guide

To remove the lower quick-release plate from the gimbal, toggle the lever on the camera

mounting plate to the unlocked position and remove the lower quick-release plate while

pressing the safety lock on the mounting plate.

Balancing

Balancing is required before shooting. Before balancing, make sure to power on the camera

if using an optical zoom lens and to select the focal length if using a varifocal lens. Make sure

DJI RSC 2 is powered o or in sleep mode before balancing.

1. Balancing the Vertical Tilt

a. Unlock the tilt axis and loosen the mounting plate knob 1.

b. Rotate the tilt axis so that the camera lens is pointing upward. Check to make sure

the camera is not top or bottom-heavy. If top-heavy, move the camera backward 2. If

bottom-heavy, move the camera forward 2.

c. Tighten the mounting plate knob while holding the camera upward. The vertical tilt is

balanced when the camera is steady while pointing upward.

4. Connect the Camera Control Cable

Choose the proper camera control cable according to the camera type. Plug one end of

the cable into the camera and plug the other end into the RSS camera control port of the

gimbal as shown above.

Lever

Safety Lock

RSS Camera Control Port

DJI RSC 2 Quick Start Guide

3. Balancing the Roll Axis

a. Unlock the roll axis. Loosen the knob on the roll arm 1.

b. Check the direction in which the roll motor swings. If the camera rotates to the left,

move the camera to the right 2. If the camera rotates to the right, move the camera to

the left 2.

c. Tighten the knob. The roll axis is balanced when the camera is steady.

d. Lock the roll axis.

2. Balancing Depth for the Tilt Axis

a. Rotate the tilt axis so that the camera lens is pointing forward. Toggle the lever to the

unlocked position 1.

b. Check to make sure the camera is not front or back-heavy. If front-heavy, move the

camera backward 2. If back-heavy, move the camera forward 2.

c. Toggle the lever to the locked position. The tilt axis is balanced when the camera is

steady while tilted up or down by 45°.

d. Lock the tilt axis.

DJI RSC 2 Quick Start Guide

4. Balancing the Pan Axis

a. Unlock the pan axis. Loosen the knob 1.

b. While holding the grip, tilt DJI RSC 2 forward, and rotate the pan arm until parallel with

you.

c. Check the movement of the pan axis. If the camera lens rotates to the left, push the pan axis

to the right 2. If the camera lens rotates to the right, push the pan axis to the left 2.

d. Tighten the knob. The pan axis is balanced if the camera is steady when rotating the

pan while tilting the grip.

Operation

After balancing, make sure the three axes are unlocked before powering on DJI RSC 2.

Screen Operation

Press the side dial to enter the menu, turn the side dial to scroll through the options, and

press conrm to select. Press the back button to go back to the previous menu.

Auto-Tune: after balancing, DJI RSC 2 must be auto-tuned before it can be used.

Press the side dial and select Auto Tune. Press the side dial again to begin.

Follow Mode Settings: tap to select follow mode and speed. The tilt motor controls the

tilt axis to follow, pan motor controls the pan axis to follow, and roll motor controls the

roll axis to follow.

Follow Mode

PF: pan follow, where only the pan axis follows the movement of the grip.

PTF: pan and tilt follow, where both the pan and tilt axes follow the movement of the

grip.

FPV: pan, tilt, and roll follow, where all three axes follow the movement of the grip.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels dji Accessoires pour appareils photo

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur

dji Ronin SC2 Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques