DiviNet Wice.box WB01-A Manuel utilisateur
WICE.box User Manual1
USER MANUAL
WICE.box MODEL NO: WB01-A
W
WICE.box
USER MANUAL
WICE.box User Manual 1
•Risk of Electric Shock. Do
Not Open
•Do Not Expose this unit to Rain
or Moisture
•No user Serviceable parts in-
side. Refer servicing to qualified
service personnel only.
CAUTION
CAUTION NOTICE
Copyright
This manual is copyrighted with all rights reserved. No
portion of this manual may be copied or reproduced by any
means.
DiviNet Access Technologies Ltd reserves the right to
revise this document and to make changes in the content
from time to time without obligation on the part of DiviNet
Access Technologies Ltd to provide notification of such
revision or change.
Trademarks
DiviNet, WICE.box, WICE.MAN, and RAMNetare
Trademarks of Divinet Access Technologies Ltd.
All other brand names, logos and trademarks mentioned in
this manual are a property of their respective owners.
WICE.box User Manual2
TABLE OF CONTENTS
Table of Contents
♦Packing List -----------------------1
♦Installation of WICE.box -----------2
♦Front Panel Controls ---------------5
♦Remote Control -------------------6
♦Trouble Shooting ------------------13
♦Technical Specifications------------14
♦Service Record --------------------15
♦Notes -----------------------------16
WICE.box User Manual 1
1. PACKING LIST
Please check the contents of the package
immediately upon opening the sealed box and before
installation. The package should contain the
following:
♦WICE.box unit
♦Remote Control
♦Audio Video Cable (AV Cable)
♦User Manual
If any of the items are found missing please contact
where it was purchased from.
Optional Accessories depending upon the model are:
♦Remote Interface Module for Keyboard
♦RF signal output for older TV sets and RF cable
♦Data Cable
♦S-Video Cable
WICE.box User Manual2
2. INSTALLATION OF WICE.box
White
RedYellow
The installation can be done only where a
WICE.MAN (RAMNet) connection is available.
Authorized personnel will do this connection. The
Fig.1 below shows the back panel of WICE.box.
This unit works on 230VAC, 50Hz power supply.
Fig.1
For televisions having AV type input, an AV cable
(provided with the kit) is connected from
“VIDEO”, “R-AUDIO-L” as show in Fig.2
Fig. 2
For televisions having only RF input, WICE.box
model with RF output is required. An RF cable is
connected from the point named “TV” to the
antenna input of the television as shown in Fig.3.
Fig.3
2. INSTALLATION OF WICE.box
WICE.box User Manual 3
2. INSTALLATION OF WICE.box
Any TV can be tuned for the WICE.box video signal
by using the “TEST SIGNAL” switch when it gives
vertical bars to TV.
Fig.4.1 (WICE.box on DSL network)
Fig.4.2(WICE.box on DSL network)
♦Input Connectivity :
For WICE.box on DSL network, as shown in Fig. 4.1,
connect the input telephone line to the splitter
(LINE). The splitter has two more ports, connect one
port (Phone) to the Telephone and the other port
(MODEM) to the DSL Modem. Both connections are
through normal twisted pair cables. Connect the
Ethernet port of the DSL Modem to the Input of
WICE.box (RAMNET port) through UTP cable. Connect
computer to the COMPUTER port (optional) of
WICE.box User Manual4
2. INSTALLATION OF WICE.box
WICE.box and AV cable to VIDEO/AUDIO ports of
WICE.box.
For WICE.box on Pure Ethernet network, as shown in
Fig. 4.2, connect the port line from Distribution Module
to the Input of WICE.box (RAMNET port) through UTP
cable. Connect computer to the COMPUTER port
(optional) of WICE.box and AV cable to VIDEO/AUDIO
ports of WICE.box.
♦Data Connectivity :
A straight UTP cable is used to connect a computer to
WICE.box. This provides data connectivity to the
computer via the RAMNet connection coming to the
WICE.box. Any standard Ethernet card (10/100Mbps)
working at 10 Mbps can be used inside the PC.
♦Video Output :
Most TV sets provide a composite video input. It can
be connected to the Video output (yellow) of the
WICE.box via the A-V cable. For old TV sets which do
not have a AV input, you may need a different model
of WICE.box which provides RF output.
♦Audio Output:
Stereo left and right channel connectors can be
connected to any stereo type audio input of a
television via the same AV cable that is used for video.
For TVs not having stereo audio input, any one audio
output (left or right) can be connected to the audio
input of the TV.
Headphone output in stereo is also available for
personal listening. You can turn down the TV volume
when using a headphone with WICE.box.
♦S-Video output :
It is a video output signal used for better picture
2. INSTALLATION OF WICE.box
WICE.box User Manual 5
quality. Some newer TV sets have an S-Video input
facility where a suitable S-Video cable can be
connected to view the picture. The same can be used
to get better picture quality from a LCD projector in a
home theatre.
Other features include:
•SURROUND SOUND (back panel)
•KARAOKE FACILITY (front panel)
Note: Some features like Surround Sound, Karaoke
Microphone input and RF output may not be active in
regular model of WICE.box.
2. INSTALLATION OF WICE.box
WICE.box User Manual6
The Remote Control of WICE.box is as shown in below.
The Main menu can be seen on the TV screen by pressing
the MENU button on the remote control. You may use the
PROG~or the PROG€ to change the current option from
the displayed list. Pressing the OK button will perform the
The front panel of WICE.box is
shown in Fig.4
Fig.5
Buttons:
MENU
When it is pressed it displays
the menu.
~~ UP
It is a menu navigation button.
To move up one item in any
menu list of options press it
once.
€DOWN
It is a menu navigation button.
To move down one item in any
menu list of options press it
once.
OK
It is used to select the current
menu option.
4. REMOTECONTROL
WICE.box User Manual 7
4. REMOTE CONTROL
ƒƒ-VOLUME DOWN
Decreases volume level.
+„„ VOLUME UP
It increases volume level.
Note : Press ƒƒ-and +„„ simultaneously to Mute the
audio. To resume the audio, press either button and set
the volume.
Main Menu options
Channels
1.Go to CHANNELS option and press OK button.
2.To surf through the channels use the PROG~or the
PROG €button or the channels can be directly
accessed by pressing “-/—” button and by pressing the
desired channel numbers.
VOD (Video On Demand)
1. Go to VOD option and press OK button.
2. Enter the password (default 1234).
3. To browse through movie list, press the PROG~or
the PROG€button and then press the OK button to
start playing the movie.
4. The movie can be forwarded by pressing the FF „„
button and fast rewind using the REW ƒƒ button
and pressing play button after selecting the size of
tracks to be skipped.
5. The movie can be paused by pressing the PAUSE
button and continue from the same position by
pressing the PLAY button.
6. While watching VOD if you switch to some other
application (Channels, Radio) and after some time
you again come back to VOD, it will ask you to
continue the same movie or start the new movie.
To continue the same movie press OK and to cancel
Table des matières
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
