Ditto S-200 Manuel utilisateur

Global Fingerprint Identification Business Solution

Fingerprint Identification Door Lock

User's Manual

S-200

Thank you for using our Ditto product.

Before using this product, read "Cautions for safety" carefully to

ensure correct use.

Please keep this User's manual for your reference at any time.

Caution for establishment and using 1

Name of each parts 2

Main function and characteristics of product 3

Registration of password and fingerprint 5

Deletion of password and fingerprint 9

Using when you enter and leave 11

Additional functions 13

Establishment drawing 15

Establishment order 16

In case of Error or unusual situation 18

Product specification 19

Product quality warranty 20

Standard of consumer loss compensation 21

- 1 -

Before using this product, read "Cautions for safety" carefully to ensure correct use

Please use it according to marked caution for your safety and protecting from product

damage.

When you establish this product

Please do not establish it under high temperature and moisture

Please avoid it from direct sunlight and rain

When you use this product

All functions of this product are initialized when it delivered.

After establishment, please register your or your family member's fingerprint as a master

according to official's direction.

Please do not register other person's fingerprint as a master

(As for registration and using of this product, please refer to each part manual)

Please do not apply unreasonable strong power to slide cover when you enter and leave.

Please do not wipe it as benzene and alcohol

When you carry this product

Please do not drop and impact on it.

Please do not carry it when the slide cover was opened.

Cautions for A/S

We do not take responsibility for any loss or demage by intention after establishment

Please call our customer center when you have any trouble to use this product or when

it out of order.

Suggestions for establishment and use

This manual and contents about specification of

product

can be changed voluntarily for performance improvement

product

- 2 -

Product composition

1.IN BODY

1. Battery case

2. Auto lock button

3. Registation button

Open/Lock select button

5. Deletion button

6. Outside lock button

(Outside

interception.....)

7. Open/Lock Lever

8. Latch

9. Latch ring

2.OUT BODY

1. No guide window

2. LED Lamp

3. Fingerprint sensor

4. No function button

5. Input/Confirm button

6. Lock button

Contents

Fingerprint Identification door lock:1 User's Manual: 1

Screw for fixing: 16 Latch : 1

Battery(AA size): 4 Drawing for drilling 1

Name of each part

- 3 -

1.Interception function to outside

No one can not enter from outside if you set this function

2.Identification function by master

It is impossible to register, modify and delete without master.

3.Password( 3~9digits)

You can use this function when the sensor out of order or your fingerprint is

damaged

4.Deletion function of part

You can delete and change fingerprint with registered ID.

5.Adoption of outside communication terminal

This function makes it possible to easy ungrade and self-test.

6.Power saving function

You can use it for a long time without change of battery

7.Protection function of circuit

This function protect circuit from static electricity and moisture and help to do

stable operation.

8.Adoption slide cover

We maximize sensor protect and waterproof function

9. Lock function by one touch 원터치 잠금 기능

It operated by pressing only one button when you lock and open

10. Adoption emergency power supply (9v)

Main function and characteristics

- 4 -

This function makes it possible to enter and leave when the battery is discharged

11. Convenient No. key

It is convenient to use when you enter/leave

12.Display function of user

It is easy to administrate registration, modification and etc due to given ID of

fingerprint and password

13.Optical indication window

It offers you convenient service with indicate operation state shown in display

window. Also you can hide above information according to your needs.

14.Low voltage warning function

Buzzer for the time to change battery

15.Hand/Auto lock function

When you establish auto lock function, doors are locked automatically after 7sec.

Also You can change mode to hand operation when enter and leave does frequently

16.System suspension function when identification is refused 3times

This system is suspended for 30seconds when identification is refused 3times

17. Convenient power interception switch

Please press CLOSE button outside to intercept power.

18. Selection of invisible password function according to user's need

It prevent exposure of your password when you enter and leave with it.

- 5 -

1.First Fingerprint Registration

At first, you have to register your fingerprint as a master because there is no fingerprint

information when it delivered. If there is one person to register as master, please register

reliable fingerprint to easy identification . Also registration of several fingerprints are

available.

①After establishment, if you open the cover or put any button, you can register

your fingerprint as a master.

②The first ID will indicate [] .

The ID can be changed by user's fondness using NUM/CLR button [ ]

Please press ENTER button[ ] after confirming ID

(Master ID : []~[ ])

③Please put your fingerprint to register sensor when the LED is turned red.

Caution

Please don't move your finger when you register your fingerprint.

④The LED will change green color if you put your fingerprint to right place for

registration. The LED will turn off after finishing registration and remove your

fingerprint from the sensor.

⑤The LED will change red again and repeat the action which you have done

No. ④3 times. If the registration is finished by normally, display window

indicate [],[ ],[ ]. If the registration failed, system restarted

from

first order. Please do it again you have done in above.

⑥When the registration is completed, the LED will change green and you can

hear buzzer sound. Also you can check your ID through the display window.

You can set option function after finishing registration.

(Registration, Deletion, Modification)

Please notice that all function will be operated after master identification.

Registration mode

- 6 -

2.Master Fingerprint Registration

(You can not be a master if you use password)

We encouraged that the master should be one of you family members who has a reliable

fingerprint. (Master ID : []~[ ])

①If you raise slide cover or press any button, electric power is supplied

system automatically. If power supply, the LED flickered green color

after

self-test

②When the LED flickered green color, please press registration button outside[ ]

until you can hear buzzer sound.

③Please input registered fingerprint as master when the LED flickered

green

color and display window indicates [].

④The LED will indicate new ID after identification as a master, if you use the ID

without change please choose ENTER button[ ]. Also you can choose your ID

through using NUM/CLR button[ ]. After confirming your ID, please press ENTER

button[ ]

The registration to be completed in the accordance with the three times input of the

master's fingerprint after ID selection.

(For input way, please refer to No 3~4 in First fingerprint registration)

3. User registration

User's ID : From [] to[ ]

■Fingerprint registration

①If you press registration button[ ] shortly once, you can hear buzzer sound

②Please input registered fingerprint as master when the LED flickered

green

color and display window indicates [].

③The LED will indicate new ID after identification as a master, if you use the ID

without change please choose ENTER button[ ]. Also you can choose your ID

through using NUM/CLR button[ ]. After confirming your ID, please press ENTER

button[ ]. At this time the lamp in button flickered green color

- 7 -

☞Reference:

When you make mistake ID input, you can return to First ID

you press NUM/CLR [] button long.

④Please input fingerprint which you want to register when the LED change to red.

Caution

Please don't move your finger when you register your fingerprint.

⑤If you put your finger to right place LED change to green color. After finishing

registration LED turned off. Please remove your finger at this time.

⑥The LED will change red again and repeat the action which you have done

No. ④3 times. If the registration is finished by normally, display window

indicate [],[ ],[ ]. If the registration failed, system restarted from first

order. Please do it again you have done in above.

⑦When the registration is completed, the LED will change green and you can

hear buzzer sound. Also you can check your ID through the display

window.

⑧After indicating new ID, the lamp in button flickered. If you want to

input

additional fingerprint, please press NUM/CLR button[ ] . If you want to finish

registration, please press ENTER button[ ] .

⑨If you press ENTER button[ ] there is a registration success confirm process in

system The system change to identification mode, After registration is ended.

When LED flickered green color, if you input fingerprint, you can enter or leave. In this

time display window indicates registered ID.

■Password registration

☞Password is available from 3 to 9digits.

①Please press registration button[ ] shortly.

②Please input registered fingerprint as master when the LED flickered

green

color and display window indicates [].

③The LED will indicate new ID after identification as a master, if you use the ID

without change please choose ENTER button[ ]. Also you can choose your ID through

using NUM/CLR button[ ]. After confirming your ID, please press ENTER button[ ].At

this time the lamp in button flickered green color.

④If you press NUM/CLR button[ ] after ID selection, display window indicates

- 8 -

[].

⑤According to the number of your press of NUM/CLR button[ ], the digit will

increased.

⑥Please press ENTER button to register it when you select first No of

your

password.

⑦The display window indicates []. To select the second No of password,

please press NUM/CLR button[ ]. If display window indicates the number, please

press ENTER button[ ].

⑧If password for registration consist of many characters, please repeat above

action in ⑦and⑧as the number of password.

⑨To finish password registration, please press ENTER button[ ] again.

☞

EX)If you want to register 3456 as a password

The display indicate double digit. First number indicate order of password,

and

second number indicate number which you want to register.

Please press NUM/CLR button [] 3 times. If FND indicate [], please

press

ENTER[ ].

Please press NUM/CLR button []4 times. If FND indicate [], please

press

ENTER[ ].

Please press NUM/CLR button [] 5 times. If FND indicate [], please

press

ENTER[ ].

Please press NUM/CLR button [] 6 times. If FND indicate [], please

press

ENTER[ ].

The first number [],[ ],[ ],[ ]in above indicates the order

password. And second number [],[ ],[ ],[ ] indicates password.

When you finish to register [],[ ],[ ],[ ] as a password, please

press

ENTER button[ ] to complete password registration.

Table des matières

Manuels Serrure de porte populaires d'autres marques

Assa Abloy

Assa Abloy effeff 827A-IP Manuel utilisateur

We.lock

We.lock SECBNEBL51 Manuel utilisateur

Iseo

Iseo MA1A Manuel utilisateur

ID Lock

ID Lock 150 Manuel utilisateur

Lockly

Lockly ACCESS TOUCH PRO Manuel utilisateur

iLoq

iLoq G50S Manuel utilisateur

SDC

SDC Z7835 Manuel utilisateur

ilco

ilco 452 Manuel utilisateur

Samsung

Samsung shs-h705 Manuel utilisateur

TRU-BOLT

TRU-BOLT 08102017 Manuel utilisateur

CDVI

CDVI 500-LADJ Manuel utilisateur

Igloohome

Igloohome Deadbolt 2S Metal Grey Instructions d'installation et d'entretien

eSSL

eSSL FL-300 Manuel utilisateur

JAKO

JAKO JKBTNX4 Manuel utilisateur

Dorma

Dorma MUNDUS PREMIUM GK 50 Guide de l'utilisateur

SCOOP

SCOOP Pullbloc 4.1 FS Panik Manuel utilisateur

Yale

Yale MORTISE 8800 SERIES Manuel utilisateur

Siegenia

Siegenia KFV AS3500 Manuel utilisateur