Displays2go LECTFCRVA Manuel utilisateur
Attaching the Base to the Body
1. Position the Base and Body on a clean flat surface.
2. Align the pre-drilled holes in the Body with the threaded
inserts in the Base.
3. Using the provided screwdriver, attach the Body to the
Base with (4) Flat Head Screws as illustrated in Figure 2.
Tip: Do not fully tighten these screws until the unit is
otherwise fully assembled.
Figure 2
Figure 3
Attaching the Reading Top
1. Position the Reading Top over the Body as illustrated
in Figure 3.
2. Align the pre-drilled holes in the Body with the threaded
inserts in the Reading Top.
3. Using the provided screwdriver, attach the Reading Top
to the Body with (4) Flat Head Screws as illustrated
in Figure 3.
Tip: You should now fully tighten all 8 Flat Head Screws.
Ce manuel convient aux modèles suivants
1
Autres manuels Displays2go Système de pupitre
Manuels Système de pupitre populaires d'autres marques
Oklahoma Sound
Oklahoma Sound 800X Manuel utilisateur
AmpliVox
AmpliVox S355 Elite Lectern Manuel utilisateur
Oklahoma Sound
Oklahoma Sound 123 Manuel utilisateur
HoverCam
HoverCam Pilot X Manuel utilisateur
Oklahoma Sound
Oklahoma Sound PS12V Manuel utilisateur
Oklahoma Sound
Oklahoma Sound LWM-7 Manuel utilisateur
