Dish Network Hopper with Sling Manuel

SET UP YOUR

HOPPER WITH SLING

STEP 1: Unpair Your Remote

If you are unable to turn on your original receiver, go to step 2.

AOpen the front panel on your

original receiver. Press the

SYSTEM INFO buon.

BLocate your remote from the list

on the right side of the screen.

Then, use your remote control to

highlight the “Unpair” opon and

press the SELECT buon.

QUICK TIP

You will not be able to use your

remote with your replacement

receiver unl you unpair it from

your original receiver.

STEP 2: Label and Disconnect Your Cables

ALocate the power cable

for the Hopper that

you are replacing, and

unplug it from the wall.

BLocate the cable

connected to the “Home

Video Network” port

and aach the blue label

to it. Then, unscrew this

cable from the receiver.

Do not unscrew it from

the wall.

CDetermine the cable

you are using to receive

audio/visual signal and

aach the correct label

to it. Then, unplug it from

the receiver, but not from

your TV.

• Orange label- RCA cables

• Red label- YPbPr cable

• Black label- HDMI cable 3

STEP 2: Label and Disconnect Your Cables (Cont.)

U.S. PATENTS 5602597,

5604544, 5606374, 6151479

MAY APPLY TO THIS PRODUCT.

US:5GXXXXXXXXXXX

DE50

FCC ID: DKNTK421

FCC ID: DKNTK422

CLocate the cable

connected to the

“Ethernet” port and

aach the yellow label

to it. Then, unplug the

cable from the receiver.

Do not unplug it from

the wall. (You may not

have this cable.)

U.S. PATENTS 5602597,

5604544, 5606374, 6151479

MAY APPLY TO THIS PRODUCT.

US:5GXXXXXXXXXXX

DE50

FCC ID: DKNTK421

FCC ID: DKNTK422

PHONEPHONE

DLocate the cable

connected to the

“Phone” port and aach

a white label to it. Then,

unplug the cable from

the receiver. Do not

unplug it from the wall.

(You may not have this

cable.)

U.S. PATENTS 5602597,

5604544, 5606374, 6151479

MAY APPLY TO THIS PRODUCT.

US:5GXXXXXXXXXXX

DE50

FCC ID: DKNTK421

FCC ID: DKNTK422

ELocate the antenna

connected to the

“Remote Antenna”

port and aach the

green label to it. Then,

unscrew the antenna

from the receiver.

STEP 3: Connect the Cables to Your Replacement Receiver

HOME

DISTRIBUTION

HOME

DISTRIBUTION

AConnect the Home Video

Network cable to the “Home

Video Network” port on your

Hopper with Sling.

RCA

COMPOSITE

RCA

COMPOSITE

YPbPr

COMPONENT

YPbPr

COMPONENT

BConnect either the RCA cables,

YPbPr cables, or HDMI cable

to the corresponding port(s) on

your Hopper with Sling.

STEP 3: Connect the Cables (Cont.)

U.S. PATENTS 5602597,

5604544, 5606374, 6151479

MAY APPLY TO THIS PRODUCT.

US:5GXXXXXXXXXXX

DE50

FCC ID: DKNTK421

FCC ID: DKNTK422

CConnect the Ethernet

cable to the “Ethernet”

port on the replacement

receiver. (You may not

have this cable.)

U.S. PATENTS 5602597,

5604544, 5606374, 6151479

MAY APPLY TO THIS PRODUCT.

US:5GXXXXXXXXXXX

DE50

FCC ID: DKNTK421

FCC ID: DKNTK422

DConnect the Phone

cable to the “Phone”

port on the replacement

receiver. (You may not

have this cable.)

U.S. PATENTS 5602597,

5604544, 5606374, 6151479

MAY APPLY TO THIS PRODUCT.

US:5GXXXXXXXXXXX

DE50

FCC ID: DKNTK421

FCC ID: DKNTK422

EConnect the remote

antenna to the “Remote

Antenna” port on the

replacement receiver.

PHONEPHONE

STEP 4: Power Your Equipment

APlug the power cord from your

Hopper into a power outlet, and

ensure that your TV is sll plugged

in. Turn your TV on.

BOpen the panel on the front of

the new receiver and ensure that

the Smart Card is secured rmly in

the slot.

STEP 4: Power Your Equipment (Cont.)

CYou will see a loading screen,

which could last for several

minutes.

DWhen the Install Wizard screen

appears, go to step 5.

QUICK TIP If you do not see the loading screen,

press the “Source/Input” buon located

on your TV unl this screen appears.

STEP 5: Pair Your Remote to Your Hopper

APress the SAT buon on your

remote control to pair it to your

Hopper with Sling. All of your

previous receiver’s recording

mers and other sengs will be

restored automacally.

BOnce your remote is paired, the

Install Wizard will proceed to the

next step automacally.

QUICK TIP

To avoid pairing your remote with mulple

receivers, ensure that you do not have any other

receivers in your home that are on the “Pair Remote

Control” step or in the “Diagnoscs” screen. 9

STEP 6: Set Up Text to Speech

AIf you would like to have a digital

voice read the text on screen,

use your remote control to

highlight the “Connue with Text

to Speech” buon. Then, press

SELECT.

BIf you do not want a digital voice to

read the text on screen, use your

remote control to highlight the

“Next” buon. Then, press SELECT.

QUICK TIP If you do not select either opon,

the Install Wizard will automacally

advance aer 30 seconds.

Autres manuels pour Hopper with Sling

Table des matières

Autres manuels Dish Network Récepteur

Dish Network

Dish Network SR200 Manuel utilisateur

Dish Network

Dish Network 118523 Manuel utilisateur

Dish Network

Dish Network Wireless Joey Manuel utilisateur

Dish Network

Dish Network Satellite Television Manuel utilisateur

Dish Network

Dish Network Solo ViP 411 Manuel utilisateur

Dish Network

Dish Network DuoDVR ViP 922 Manuel utilisateur

Dish Network

Dish Network Duo ViP 222 Manuel utilisateur

Dish Network

Dish Network DVR 522 Manuel utilisateur

Dish Network

Dish Network DISH 311 Manuel utilisateur

Dish Network

Dish Network 811 Manuel utilisateur

Dish Network

Dish Network Home Network Manuel utilisateur

Dish Network

Dish Network Duo ViP 222 Manuel utilisateur

Dish Network

Dish Network DISH 625 Instructions d'utilisation et d'installation

Dish Network

Dish Network WALLY Manuel utilisateur

Dish Network

Dish Network DISH 351 Instructions d'utilisation et d'installation

Dish Network

Dish Network SoloDVR ViP 612 Manuel utilisateur

Dish Network

Dish Network 512 Manuel utilisateur

Dish Network

Dish Network 123698 Manuel utilisateur

Dish Network

Dish Network 4K Joey Manuel utilisateur

Dish Network

Dish Network DishPro 322 Manuel utilisateur

Dish Network

Dish Network 622 guide Manuel

Dish Network

Dish Network ViP 722 Manuel utilisateur

Dish Network

Dish Network DISH322 Manuel utilisateur

Dish Network

Dish Network Solo 381 Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur