DirekTronik SX-SWE01B Manuel utilisateur
1
Mixed Input Type-C VGA HDMI
HDMI 2.0 HDBaseT Switch
Support 4K@60hz YUV4:4:4, 18Gbps, HDR
Best.nr: 20101099
2
Operating Instruction
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the life
of your equipment
3
Operating Instruction
Catalogue
1. Features................................................................................................................................................................4
2. Package Contents.................................................................................................................................................4
3. Specifications.......................................................................................................................................................4
4. Panel Descriptions................................................................................................................................................5
4.1 Menu Display.................................................................................................................................................6
5. Application Diagram............................................................................................................................................9
6. Remote Control Description................................................................................................................................9
7. IR system............................................................................................................................................................10
8. PC Tool Control.................................................................................................................................................10
8.1 Port setup......................................................................................................................................................10
8.2 Control interface...........................................................................................................................................11
8.3 Network Interface for device.......................................................................................................................12
9. Web Control.......................................................................................................................................................13
9.1 Change the IP address of your PC................................................................................................................13
9.2 Enter Web and Control.................................................................................................................................14
10. Command Control............................................................................................................................................15
11. Power Off and Reboot Input Priority Mode.....................................................................................................16
12. RS232 Pass through.........................................................................................................................................17
13. Micro USB for Firmware Upgrade..................................................................................................................17
13.1 MCU application layer upgrade.................................................................................................................17
13.2 GUI application layer upgrade...................................................................................................................17
13.3 GUI Web upgrade......................................................................................................................................17
MAINTENANCE..................................................................................................................................................19
PRODUCT SERVICE...........................................................................................................................................19
WARRANTY.........................................................................................................................................................19
MAIL-IN SERVICE..............................................................................................................................................19
LIMITEDWARRANTY LIMITS AND EXCLUSIONS.......................................................................................20
4
Operating Instruction
1. Features
Incorporate HDBaseT technology
HDMI 2.0 version support 4K@60Hz YUV4:4:4, 18G, HDR10
Support 1x VGA, 1x Type-C, 2x HDMI input
Support 1x HDMI and HDBT output simultaneously
Transmit up to 70m under 1080p@60Hz, 40m under 4K@60Hz
HDCP 2.2/1.4 compliant
Audio sampling rate upto 192KHz,support max 7.1CH
Support Analog audio embedded, Mic input
Support Analog/SPDIF audio extraction, analog output support PCM2.0,SPDIF output
support Dolby, DTS, max 5.1CH
With wide-band Bi-Direction IR routed control(38~56KHz), IR extend to control device
Support RS232 pass through
Support micro USB port for firmware upgrade
Support Panel Button with LCD, IR Routing, RS232, TCP/IP, PC Tool Control
Support POC (receiver powered by HDBaseT switch)
DC 24V/1A power supply
2. Package Contents
1). 1x Main Unit (HDBaseT Switch)
2). 1x Power supply DC24V/1A
3). 1x Remote control
4). 2xIR Transmitter cables, 3x Wide-Band IR Receiver cables
5). 1x CD for control software & user manual
6). 1x Receiver
3. Specifications
OperatingTemperatureRange -5to+40°C(23to+104°F)
Storage Temperature Range -10 to +60°C(14 to +140 °F)
OperatingHumidityRange 5to90%RH(nocondensation)
Input Video Signal 0.5-1.0 volts p-p
Input DDC Signal 5 volts p-p (TTL)
Bandwidth 18Gbit/s
Video Format Supported 4K@60Hz,YUV4:4:4
4k@30Hz/1080P/1080i/720P/576P/480P
HDCP Compliant HDCP2.2 and HDCP1.4
Output Video HDMI2.0 and HDMI 1.4 (over HDBaseT and HDMI)
Audio Format Supported PCM2.0, Dolby5.1, DTS5.1 digital audio
Maximum Transmission Distance 1080P 70m, 4K 40m(HDBT
output),4K/6M,1080p/15M(HDMI output)
Power Consumption 16.5wtts (Max.)
Dimensions 235 L x 137W x 39H mm
Mass (Main Unit) 1.175KG
5
Operating Instruction
4. Panel Descriptions
Front Panel
①LCD: Showing HDBaseT switch informations ②Function button: Up, Down, Left, Right
③Function button: Menu, Enter
Rear Panel
1RS232: RS232 pass through/RS232 for PC tool control; Ethernet: IP/Web control;
FW: micro usb port for firmware update; IR Ext: IR extender for control HDBaset switch
2PC: AudioinforVGAinputonly; HDMI: Analog PCM2.0 audio embedded
③Audio SPDIF out(Dolby, DTS, Max 5.1CH)
④Analog PCM2.0 audio out
⑤IR-in/IR Out for remote controlling
⑥DC 24V/1A power supply
⑦MIC in:for 48V microphone/MIC device(MIC mode,support HDMI/Type C/VGA)
⑧MIC switch: Left switch for 48v microphone mode;
Middle switch for MIC mode; Right switch for line mode(Analog PCM2.0 audio embedded)
⑨Video input: TypeC-1: Type C in; PC-2: VGA in; HDMI in: HDMI-3/HDMI-4
⑩Video output: HDMI: HDMI out; HDBT/POC: HDBT out (connect HDBaset receiver/other HDBaset
products/Cascade)
Note:When you need to use MIC in/Analog audio embedded function,please set the audio input mode for
“Analog” by panel/PC tool/Web GUI first,then switch the MIC switch to choose the audio
format(48v/Mic/Line).
Left Guide button Short press:left/right choose function option in submenu,in MIC
input VOL/analog out VOL adjustment: left(-) right(+)
Right Guide button
Up Guide
b
utton Short press:up/down choose function option in submenu
Down Guide
b
utton
Ente
r
Confir
m
b
utton Short press:ente
r
submenu/back to last status
Menu Main Menu Short press:display/direct back to main Menu
6
Operating Instruction
4.1 Menu Display
Press Menu button,menu include VIDEO SET、AUDIO SET、EDID SET、MIC IN VOL SET、ANAL OUT
VOL SET、IP QUERY、UART QUERY、REST SET, press any button to highlight LED screen, and auto
turn dark without any operation after 20 seconds.
1). VIDEO SET: For input switch,select VIDEO SET and press enter button,press left/right button select current
input signal, press enter button again auto back to main menu to finish setting.
2). AUDIO SET: Audio input set,support 3 modes- HDMI(audio input for signal),Anal(audio embedded),
Mute(silent mode), select AUDIO SET,press enter button,then press left/right button select audio input,
press Enter again auto back to main menu to finish setting.
7
Operating Instruction
3). EDID SET: Support 4 modes- 4K60(Default),1080P(Default),COPY HDMI,COPY HDBT.
Select EDID SET, press Enter button,then press left/right button to select EDID for input, press Enter button
again auto back to main menu to finish setting.
4). MIC IN VOL SET: MIC input volume adjustment from 0~10,maximum 10 for loudest sound,minimum 0.
Select MIC IN VOL SET,press Enter button for volume control mode,press left button to decrease vol.,press
right button to increase vol.,press Enter button again auto back to main menu to finish setting.
5). ANAL OUT VOL SET: Analog audio out volume adjustment from 0~10,maximum 10 for loudest sound,
minimum 0. Select ANAL OUT VOL SET,press Enter button for volume control mode,press left button to
decrease vol.,press right button to increase vol.,press Enter button again auto back to main menu to finish setting.
8
Operating Instruction
6). IP QUERY: Default IP address 192.168.1.168,DHCP: off ,press left/right button select DHCP status,short
press Enter button and back to up one level.
7). UART QUERY: Device baudrate support 9600,19200,38400,57600,115200(default),not support to modify
by panel button,select UART QUERY,short press Enter button to check current baudrate.
8). SYSTEM RESET: Factory reset,short press Enter button direct and reset to factory defaults.
9
Operating Instruction
5. Application Diagram
6. Remote Control Description
①Standby Mode
②Mute
③Video input: “1” for TypeC-1;
“2” for PC-2(VGA);
“3” for HDMI-3;
“4”for HDMI-4;
④MIC in (ON/OFF)/VOL control;
⑤Analog audio out (ON/OFF)/VOL control;
10
Operating Instruction
7. IR system
The HDBaseT switch can pass the IR signal through the IR system to the HDMI source or pass the IR signal
from the HDMI source to the HDMI sink.
Dual way IR using:
Step1: “IR IN” is for HDBT output, “IR OUT” is for input channel.
Step2: HDBaseT receiver support connect with IR-RX cable to control the HDBaseT switch/DVD by remote.
Step3:HDBaseT switch support connect with IR-RX cable(IR in) to control TV by remote.
Step4: HDBaseT switch “IR Ext” support connect with IR-RX cable to control the HDBaseT switch by remote.
8. PC Tool Control
1).Download the “swe01b_4-Input HDMI Switcher.exe”software to your computer, then open it.
2).Using USB to RS232 cable connect to the RS232 port of HDBaseT switch.
3).Press “Search” button to find out the right port then click “Open Port”.
8.1 Port setup
1). Communication port setting: in PC windows system run the “swe01b_4-Input HDMI
Switcher.exe”software,in RS232 INFO. ,select correct port (communication port) and baud (should be same to
baudrate in UART QUERY for connection)
2). Click “Search”refresh communication port
3). “Open Port”: in disconnect status,”Close Port”: connected to device.
Table des matières
Autres manuels DirekTronik Changer
DirekTronik
DirekTronik SM-MST-2D Manuel utilisateur
DirekTronik
DirekTronik TS0800G-2S-SE Manuel utilisateur
DirekTronik
DirekTronik 25-0390 Manuel utilisateur
DirekTronik
DirekTronik HDR10 Manuel utilisateur
DirekTronik
DirekTronik 20102192 Manuel utilisateur
DirekTronik
DirekTronik 20100851 Manuel utilisateur
DirekTronik
DirekTronik 20114297 Manuel utilisateur
DirekTronik
DirekTronik 25-0577 Manuel utilisateur
