Directechs DS3+ Manuel utilisateur

INSTALLATION GUIDE

DS3+ / DS4+

2010 Hyundai Genesis Coupe (Smart Key). 933.HYUNDAI1 4.10.195.3

This product is intended for installation by a professional installer only! Attempts to install this

product by a person other than a trained professional may result in severe damage to a vehicle’s

electrical system and components.

Introduction 3

Vehicle function compatibilities 4

Pre-installation and application warnings 5

Installation 6

Wiring diagram 6

Wiring diagram 7

Optional starter disable connection 8

Locating components in the vehicle 9

Vehicle connections 10

Module programming 13

Module programming for security-only installations 14

Pairing remotes 15

Connecting the module 15

8556T Temperature Sensor 15

8504D Combo Sensor 15

RF Systems 15

When used in conjunction with SmartStart 16

D2D port configuration 16

Manual transmission 17

LED diagnostics and troubleshooting 18

Soft reset 20

Hard reset 20

Tach learning procedure (not needed with Virtual Tach) 21

Initializing Virtual Tach (not needed with hardwired or data tach applications) 21

Limited lifetime consumer warranty 22

Quick reference guide 23

Contents

3933.HYUNDAI1 4.10.195.3 2010 Hyundai Genesis Coupe (Smart Key)

Introduction

This guide provides information on the installation of the DS3/DS3+ and DS4/DS4+ modules as a digital solution. Using these modules in a

digital conﬁguration require the module to be ﬂashed with vehicle speciﬁc ﬁrmware. Refer to our website (www.directechs.com) and click on

the DIRECTLINK text in the header for additional information.

DS3/DS3+ and DS4/DS4+ modules provide an all-in-one solution for most modern vehicles, and include remote start, keyless entry, security,

and immobilizer bypass capabilities. T-harnesses may also be used in many applications for easy installation.

The following methods are available to conﬁgure modules:

• Web: www.directechs.com (DS3/DS3+ and DS4/DS4+)

• Desktop Application: Directlink DT (DS3/DS3+ and DS4/DS4+)

• Mobile Device: Directlink App (DS4/DS4+ only)

When Flashing via Directlink DT (Desktop app) or via the Web, an XKloader2 will be required.

To conﬁgure via Web or DirectLink DT (mobile app):

1. Disconnect the main module from any (+) 12V power source.

2. Connect the module to your computer using the XKLoader2.

3. Follow the steps in the pop-up window that will be displayed when the module is detected.

Notes:

•Flashing via web is only possible using Internet Explorer on Windows 8, 8.1, and 10.

•This method is not compatible with any other browser (Edge, Chrome, Firefox, etc.)

•When using Windows 11 or newer, Directlink DT is mandatory.

The DS4/DS4+ module is designed to be conﬁgured using the DirectLink application through mobile devices.

To download the DirectLink mobile application, visit the Google Play or Apple store. They can also be

conﬁgured via Web and DirectLink DT. The DS4/DS4+ features are built in Bluetooth® 4.0, allowing you to

conﬁgure and control your system. The DS3/DS3+ module is not equipped with Bluetooth®, therefore is not

compatible with the DirectLink app for mobile devices.

To conﬁgure via DirectLink DT (mobile app):

1. Follow and complete the wiring diagram(s) related to your installation through the app.

2. When installation is complete, select Conﬁgure DS4/DS4+.

3. Follow the on-screen instructions.

FLASH REQUIRED!

4 White

4933.HYUNDAI1 4.10.195.3 2010 Hyundai Genesis Coupe (Smart Key)

Vehicle function compatibilities

This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.

Note: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart.

Panic Mode Activation

Arm Factory Security

Disarm Factory Security

Door Lock Control

Door Unlock

Driver Priority Unlock

Trunk / Hatch Release

Control of aftermarket alarm with OEM remote

* Fuel Level

Immobilizer Bypass-Data No Key Req'd

3x LOCK START (Start control using OEM Remote)

Accessory Activation

Ignition Activation

RAP Shut Down (Retained ACC Power)

Remote Start Takeover

SmartStart

Start (Crank) Activation

Tach / RPM Output

Entry Monitoring ALL Door Pins

Entry Monitoring Hood Pin

Entry Monitoring Trunk/Hatch Pin

Brake Status (foot brake)

E-Brake Status

Ignition Status

5933.HYUNDAI1 4.10.195.3 2010 Hyundai Genesis Coupe (Smart Key)

Pre-installation and application warnings

START HERE This section highlights important information for this speciﬁc ﬁrmware and will assist in pricing accordingly, as

well as bringing awareness to any operational or vehicle limitations.

Compatibilities and Requirements

T-Harness

compatible T-Harness is not compatible.

AUX

Keys

required for

programming 1Keys required

for operation 0

Vehicle Takeover Refer to the Quick Reference Guide section for more details.

Firmware notes

Unless speciﬁed otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.

It is important to check that the fuses are positioned correctly in the module. Proper fuse positioning is displayed on each wiring

diagram.

Refer to the "Vehicle connections" following the installation diagram.

Footnotes

[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin or if

not supported in data.

[2] Siren: The siren is only required when enabling the security features during module ﬂashing.

[3] Virtual Tach: This vehicle does not support a virtual tach. A tach source from the vehicle must be used.

[4] Security-only installations: refer to the "Locating components in the vehicle" section for the optional starter disable connection.

6933.HYUNDAI1 4.10.195.3 2010 Hyundai Genesis Coupe (Smart Key)

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

123

67 8 910 11 12 13 14

4 5

(+) 12V:

Red, pin 1

Dash Fuse Box

(brown, rear connector - K)

Dash Fuse Box

(blue, rear connector - G)

(+) Brake: Red/Orange, pin 2

(-) Keysense Output: Yellow/Black: 8

Junction connector

(white connector in driver’s kick panel)

C-CAN High: Red, pin 6

C-CAN Low: Blue, pin 14

(-) Ground: Black: 10

(+) 12V Input: Red: 6 & 12

(+) Brake Activation Output: White: 5 & 11

OBDII Diagnostic

(connector side view)

(+) 12V Input: Blue/Red: 2

(+) PTS Output: Blue: 3

1 Amp Diodes

(+) PTS 1:

Blue, pin 1

(+) PTS 2: Pink or

Pink/Black, pin 7

12345

678 9 10

(-) Hood: Yellow, pin 31

Driver’s Kick Panel

(blue connector)

1 2 34

15 16 17

29 30 31

11 12 13

25 26 27

39 40 41

Siren

(-) Hood Input: Gray: 21

(+) Siren Output: Brown/Red: 11

(+) Ignition Sense Input: Pink: 12

Wiring diagram - Automatic Transmission

(+) Parking Lights Output: Lt. Green: 8

6 Amp

Diodes

(+) Parking Light (right):

Blue or Gray, pin 3

(+) Parking

Light (left):

Blue, pin 6

123 4 5 6 7 8 9 10 11

12 13 14 15 16 17 18 19 20 21 22

Start/Stop Button Switch

(black connector)

PDM:

Power

Distribution

Module

(right of

steering column)

PDM - Power Distribution Module

(white connector right of steering column)

B-CAN High:

Red, pin 11

B-CAN Low:

Blue, pin 10

(-) Keysense: Red, pin 12 (AC) Tachometer:

White/Orange, pin 16

(+) Ignition:

Blue/Orange, pin 7

PDM - Power Distribution Module

(black connector,

right of steering column)

65 78 9 10

1 2 3 4

(-) GWA Output: Blue/White: 2

Refer to the Optional starter

disable connection section for

relay and connector details.

(+) 12V Input: Lt. Green/Red: 7

(AC) Tach Input: Violet/White: 22

HS CAN 2 High: Orange/Green: 4

HS CAN 1 Low: Tan: 1

HS CAN 1 High: Tan/Black: 2

HS CAN 2 Low: Orange/Brown: 3

Security Only

Mandatory Connections

Remote Start Only

Legend:

Remote Start + Security

22 812

4 2442

Slide to open

A module can also be used for

this installation.

IMPORTANT:

Position the

fuses correctly!

MAIN (5A) (+)

(-) RLY3 PK LIGHT (15A) (+)

(-) ACC & START (30A) (+)

(-) FLEX RLY (20A) (+)

IGN (20A) (+)

MAIN (5A) (+)

(-) RLY3/PK LIGHT(15A) (+)

7933.HYUNDAI1 4.10.195.3 2010 Hyundai Genesis Coupe (Smart Key)

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

123

67 8 910 11 12 13 14

(+) 12V:

Red, pin 1

Dash Fuse Box

(brown, rear connector - K)

Dash Fuse Box

(blue, rear connector - G)

(-) Keysense Output: Yellow/Black: 8

C-CAN High: Red, pin 6

C-CAN Low: Blue, pin 14

(-) Ground: Black: 10

(+) 12V Input: Red: 6 & 12

OBDII Diagnostic

(connector side view)

(+) 12V Input: Blue/Red: 2

(+) PTS Output: Blue: 3

1 Amp Diodes

(+) PTS 1:

Blue, pin 1

(+) PTS 2: Pink or

Pink/Black, pin 7

12345

678 9 10

(-) Hood: Yellow, pin 31

Driver’s Kick Panel

(blue connector)

1 2 34

15 16 17

29 30 31

11 12 13

25 26 27

39 40 41

Siren

(-) Hood Input: Gray: 21

(+) Siren Output: Brown/Red: 11

(+) Ignition Sense Input: Pink: 12

Wiring diagram - Manual Transmission

(+) Parking Lights Output: Lt. Green: 8

6 Amp

Diodes

(+) Parking Light (right):

Blue or Gray, pin 3

(+) Parking

Light (left):

Blue, pin 6

Start/Stop Button Switch

(black connector)

PDM:

Power

Distribution

Module

(right of

steering column)

PDM - Power Distribution Module

(white connector right of steering column)

B-CAN High:

Red, pin 11

B-CAN Low:

Blue, pin 10

(-) Keysense: Red, pin 12 (AC) Tachometer:

White/Orange, pin 16

(+) Ignition:

Blue/Orange, pin 7

PDM - Power Distribution Module

(black connector,

right of steering column)

65 78 9 10

1 2 3 4

(-) GWA Output: Blue/White: 2

Refer to the Optional starter

disable connection section for

relay and connector details.

(+) 12V Input: Lt. Green/Red: 7

(AC) Tach Input: Violet/White: 22

HS CAN 2 High: Orange/Green: 4

HS CAN 1 Low: Tan: 1

HS CAN 1 High: Tan/Black: 2

HS CAN 2 Low: Orange/Brown: 3

(-) Clutch Output: White: 5 & 11

Clutch Pedal

(-) Clutch:

Green, pin 1

(-) E-Brake Input: Black/White: 17

(-) E-Brake:

Brown/Orange, pin 4

Security Only

Mandatory Connections

Remote Start Only

Legend:

Remote Start + Security

22 812

4 2442

Slide to open

A module can also be used for

this installation.

IMPORTANT:

Position the

fuses correctly!

MAIN (5A) (+)

(-) RLY3 PK LIGHT (15A) (+)

(-) ACC & START (30A) (+)

(-) FLEX RLY (20A) (+)

IGN (20A) (+)

MAIN (5A) (+)

(-) RLY3/PK LIGHT(15A) (+)

8933.HYUNDAI1 4.10.195.3 2010 Hyundai Genesis Coupe (Smart Key)

22 812

4 2442

86 85

87a

Refer to the

Vehicle connections

section for wire

and connector

details.

(-) Ground When Armed (GWA) Output: Blue/White: 2

Starter (connector side)

Starter (vehicle side)

(+) Ignition

Cut

Security Only

Mandatory Connections

Remote Start Only

Legend:

Remote Start + Security

Optional starter disable connection

When using an external relay, use a 1N4002 diode or larger.

1A Diode (1N4002+)

9933.HYUNDAI1 4.10.195.3 2010 Hyundai Genesis Coupe (Smart Key)

Locating components in the vehicle

10 933.HYUNDAI1 4.10.195.3 2010 Hyundai Genesis Coupe (Smart Key)

Vehicle connections

The connection information listed below is specific to the 2010 Hyundai Genesis Coupe (Smart Key). Refer to “Pre-installation and application warnings” for a list of important

notes.

Data harness, 8-pin white connector (H1)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color Connection

H1/1 Tan (Data) HS CAN 1 Low data link connector, black 16 pin plug, pin 14 data blue (C-CAN) Mandatory

H1/2 Tan/Black (Data) HS CAN 1 High data link connector, black 16 pin plug, pin 6 data red (C-CAN) Mandatory

H1/3 Orange/Brown (Data) HS CAN 2 Low Power Distribution Module right of column, white 20 pin plug,

pin 10

data blue (B-CAN) Mandatory

H1/4 Orange/Green (Data) HS CAN 2 High Power Distribution Module right of column, white 20 pin plug,

pin 11

data red (B-CAN) Mandatory

H1/5 Lt. Green No Connection No Connection

H1/6 Violet/Brown No Connection No Connection

H1/7 Orange/Black No Connection No Connection

H1/8 Yellow/Black (-) Keysense Output Power Distribution Module right of column, white 20 pin plug,

pin 12

- red Remote Start

Only

Analog input/output harness, 22-pin white connector (H2)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color Connection

H2/1 Lt. Green/Black (-) Factory Alarm Arm Output No Connection

H2/2 Blue/White (-) Ground When Armed (GWA) Output [3] Starter:

Power Distribution Module right of column, black 10 pin plug,

pin 6

Ignition:

Power Distribution Module right of column, black 10 pin plug,

pin 7

Must use a relay.

Must use a 1N4002 diode or larger.

white

blue/orange

Mandatory

H2/3 Dk. Green/Black (-) Lock Output No Connection

H2/4 Red/White (-) Trunk Release Output No Connection

H2/5 Brown/Black (-) Horn Output driver kick, blue 42 pin plug, pin 11 - green/orange Optional

H2/6 Brown/White (-) AUX 1 Output No Connection

H2/7 White (+) AUX 1 Output No Connection

H2/8 Violet/Black (+) AUX 2 Output No Connection

H2/9 Dk. Blue/Black (-) Unlock Output No Connection

H2/10 Lt. Blue/Black (-) Factory Alarm Disarrn Output No Connection

H2/11 Brown/Red (+) Siren Output [2] Security Only

H2/12 Pink (+) Ignition Sense Input Power Distribution Module right of column, black 10 pin plug,

pin 7

+ blue/orange Mandatory

H2/13 Violet (+) Door Input No Connection

Autres manuels pour DS3+

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Directechs Accessoires automobiles

Directechs

Directechs DB3 Manuel utilisateur

Directechs

Directechs DB3 Manuel utilisateur

Directechs

Directechs Directed 403.HYUNDAI10 v2.11 Manuel utilisateur

Directechs

Directechs FORD13 Manuel utilisateur

Directechs

Directechs DB3 Manuel utilisateur

Directechs

Directechs DS3 Manuel utilisateur

Directechs

Directechs DS3+ Manuel utilisateur

Directechs

Directechs DB3 Manuel utilisateur

Directechs

Directechs DB3 Manuel utilisateur

Directechs

Directechs DIRECTWIRE 403.NISS08 Manuel utilisateur

Directechs

Directechs FORD12 Manuel utilisateur

Directechs

Directechs HKHT1 Manuel utilisateur

Directechs

Directechs DB3 Manuel utilisateur

Directechs

Directechs DB3 Manuel utilisateur

Directechs

Directechs DIRECTED DB3 403.FORD18 Manuel

Directechs

Directechs DS3 Manuel utilisateur

Directechs

Directechs DB3 Manuel utilisateur

Directechs

Directechs Directed 933.GM11 v1.21.198.12 Manuel utilisateur

Directechs

Directechs DB3 Manuel utilisateur

Directechs

Directechs DB3 Manuel utilisateur

Directechs

Directechs 933.CHRYSLER6 Manuel utilisateur

Directechs

Directechs DB3 Manuel utilisateur

Directechs

Directechs NISS06 Manuel utilisateur

Directechs

Directechs DB3 Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur