dipo INDUCTION BKUW Series Manuel utilisateur
- Cognition Area is more wide than other products
- Recognize cookware up to 4cm from top glass
#503, Hanam Venture Center, Geomdansan-ro 239, Hanam-si, Gyeonggi-do, 13023 / Tel : +82-31-793-5895 / FAX : +82-31-793-5862
Recommendation
Buffet, Warmer
208~240V, 50/60Hz, 1PH
BKUW-J
Electricity
Power
Consumption
BKUW
BKUW-A
BKUW-E
BKUW-CE1
BKUW-J
220~240V, 50/60Hz, 1PH
660 mm
220~240V, 60Hz, 1PH
220V, 60Hz, 1PH
Conversion to Calory
▣ Under Range
- Install the product under the table without perforated
COPYRIGHT©2010 DIPO INDUCTION CO., LTD ALL RIGHTS RESERVED.
Warranty
1 year (to be charged in case of user's negligence)
Features
&
Functions
▣ Safety
- No vessel : "U" flashing
- Over current indication : "1" flashing
- Over voltage indication : "2" ( Above 265V ) flashing
- Low voltage : "3" ( Below 180V ) flashing
Controller
7 Warming Steps
(1-7)
Power Connection
2.5 A
DIPO INDUCTION RANGE / www.dipoinduction.com
Dimension / Weight
1
2
3
4
Product: 296 X 370 X 80 (mm) / 4kg
Package: 490 X 360 X 180 (mm) / 4.8kg
- Unstable power indication: "7" flashing
- Defective PCB indication : "8" flashing
- Defective Working Coil indication : "9" flashing
Cookware Diameter
min : Ø130mm
max : Ø240mm
Loadable Weight
30 Kg
Power Cable
Under-counter Warmer
BKUW
BKUW-A
BKUW-E
BKUW-CE1
BKUW
Specification
200V, 50/60Hz, 1PH
Max Current
Plug type
345.6 Kcal/h
500 W
- Over heated product indication : "4" (IGBT heat sink temperature above 85℃) flashing
- Top surface overheated (empty vessel)
: "6" ( Top surface temperature above 260℃) flashing
5
6
7
(1L Water,
using
chafer)
35℃
40℃
50℃
60℃
70℃
80℃
90℃
Capacitive Button
(separated from the unit)
660 mm
Controller Cable
DIPO INDUCTION RANGE / www.dipoinduction.com
COPYRIGHT©2010 DIPO INDUCTION CO., LTD ALL RIGHTS RESERVED.
Installation Drawing (marble)
1. Install the trim ring with tapping screws under wooden table and install stopper
trim ring. (M4 X 10mm * 6 EA)
( Thickness of wooden table should be between 20mm and 30mm )
2. Insert unit by sliding and insert stopper trim ring into main trim ring. Make sure
the unit is equipped properly with M4 x 10mm screws.
( If table thickness is 10mm, screws should be less than 10mm )
※ We recommend inserting unit into trim ring first and installing trim ring with unit
after.
Controller
Controller Installation
#503, Hanam Venture Center, Geomdansan-ro 239, Hanam-si, Gyeonggi-do, 13023 / Tel : +82-31-793-5895 / FAX : +82-31-793-5862
Step 3 (wooden table)
Installation Guide and Dimension (mm)
Step 1 (wooden table)
How to Install under Wooden Table
Step 2 (wooden table)
main
trim ring
stopper
trim ring
unit
table
Ce manuel convient aux modèles suivants
4
Autres manuels dipo INDUCTION plaque de cuisson
