Dinam Led Dn-T2M Manuel utilisateur

Dn-T2M

2.4G LED Color Temperature Controller

T2M is the 2.4GHz RF wireless synchronization/zone color temperature controller which adopts Dinam multiple

global initiate technology. The control system consists of two parts, the RF remote control and receiver, realize the

signal synchronization on multiple receivers, zone controlled arbitrarily (no more than 8 zones) within effective

distance, a very good solution for the LED project needs sync/zone control wirelessly.

1. Technical Specs:

4. Components Description for Receiver and Remote Control:

Can RF remote the functions of color temperature touch adjustment, brightness adjustment, and DIY scene

modes. User-friendly color wheel for color temperature adjustment, unique LED state light for sync change

indicated, user can simply know the LED working state from distance by checking the remote.

Input Voltage: DC5V Built-in Lithium Battery

Working Current: ≤30mA

Working Frequency: 2.4GHz

RF Remote Distance: 30m

Remote Option: Sync or Zone Control

T2M Remote Control

Standby Time: ≤6 Months

Battery Capacity: 1000mAh

Dimensions: L145×W55×H22(mm)

Package Size: L168×W102×H28(mm)

Weight (G.W.): 200g

T3-CV T3-CC

T2M

Input voltage: DC12V-DC48V

Output voltage: DC3V-DC46V

Output current: CC 350/700/1050mA ×3CH

Output power: 1.05W~48.3W ×3CH Max 144.9W

Compatible remote control: T1/T2/T2M/T3/T3M/T3X

Working temperature: -30℃~55℃

Dimension: L175×W44×H30(mm)

Package size: L178×W48×H33mm

Weight (G.W.): 110g

T3-CC Receiving controller (current 3 in 1)

Input voltage: DC5V-DC24V

Max current load: 6A×3CH Max 18A

Max output power: 90W/216W/432W(5V/12V/24V)

Compatible remote control: T1/T2/T2M/T3/T3M/T3X

Working temperature: -30℃~55℃

Dimension: L175×W44×H30(mm)

Package size: L178×W48×H33mm

Weight (G.W.): 110g

T3-CV Receiving controller

2. Product Size:

55mm

145mm

22mm

44mm

30mm

175mm

170mm

27mm

60mm

86mm

65mm

T2M RF remote control

T3-CV/T3-CC Remote holder

3. The learning ID method of remote control:

If installing multiple receivers in one zone, repeat the above steps, choose the same area key when ID learning.

Learning ID:

Cancelling ID:

1. Turn on the receiver and remote control

Short press "ID learning button" on the receiver, the running light keeps on, then long press 1-8 zone-selection

keys on the remote, the running light returns to flash (the buzzer long beep, the indicator light flashes 3 times),

activated successful.

1. Turn on the receiver and remote control.

2. Press “ID learning button” on the receiver more than 8 seconds, the buzzer beep twice, delete all the learned remote.

DC12V~48V

T3-CC

Current selection switch

(Method of operation see below form)

Remote ID

Learning Button

Power Input Socket

LED Lamp Connected Socket

DC5V~24V

T3-CV

CV receiver

CC receiver

Remote ID

Learning Button

Power Input Socket LED Lamp Connected Socket

warranty

5 years

6. System Diagram:

OUTPUT

zone 1

zone 8

zone 7

zone 6

zone 5

zone 4

zone 3

zone 2

OUTPUT

zone 2

zone 1

zone 4

zone 3

zone 2

zone 1

zone 4

zone 3

zone 2

zone 1

zone 4

zone 3

zone 2

zone 1

zone 4

zone 3

zone 2

zone 1

zone 4

zone 3

zone 2

zone 1

zone 4

zone 3

Spacing zone-division

Centralized zone-division

The receivers can be divided into 1~8 zones within effective distance(1pc receiver per zone), no wiring needed

between the receivers.

If you don't need color temperature smooth mode by pressing the , , each zone can set up unlimited

receivers and achieve brightness, color temperature adjustment synchronously.

Receiver

Rec eiver

Receiver

Rece ive r

Recei ver

Rec eiv er

Recei ver

Receiv er

Receiver

Recei ver

Rec eiv er

Receiver

Receiv er

Rec eiv er

Receiv er

Rec eiver

Rec eiv er

Rece iver

Receiver

Rec eiv er

Rec eiver

Rec eiv er

Receiver

Rec eiv er

Recei ver

Rec eiver

Rece iver

Receiver

Receive r

Rec eiv er

Receiver

Rece iver

Receiver

Rece iver

Receive r

Rec eiv er

Receiver

Rec eiv er

Receiver

Receiv er

Rec eiv er

Receiver

Touch Color Circle

Speed+/Speed-

CT+/CT-

BRT+/BRT-

Sync Status Indicator Light

Scene-saved Keys

On/Off

Zone Selection Keys

M1 M2

(Press for 3 seconds, can save the

scene mode in the 8 current

zone control)

(Keep pressing to adjust

brightness continuously)

Zoning Instructions:

●

Select one of the zone: Press keys 1-8 on the remote control.

Select zone control arbitrarily: press" +any number+ ",

eg: take 456 as a zone, should press " 456 ".

All choose(8 zones): press " " twice.

when a zone is under inactive state, press “Zone selection keys”

to light up that zone.

★Press “Zone Selection Keys” in 3 seconds, the buzzer can be on or off.

5. Other Special Functions:

Turn on the remote, long press the on/off key for 5 seconds until the green light flashes 3 times, and then the

green light flashes, the numbers of the green flash will be the frequency point of the remote. you can only edit the

frequency point after 3 seconds.

Method 2: long press “on/off” key over 5 seconds, the green light flashes, the flash times plus 1 means the

frequency point accumulate 1. In short, long press the “on/off” key 5 seconds each time, the frequency

point will accumulate 1, which will again become value 1 when added to 12, and that cycle repeats.

A. Reset Function:

B. Check and Edit the Frequency Point on the Remote:

Long press simultaneously, release the 2 keys after 3 seconds, the remote will auto off,

means reset completed. and then could restart the remote.

Feature: Reset function is available when remote operates abnormally.

Operation:

Multiple remotes sync-control becomes available when they use the same frequency point.

Revising the frequency point to eliminate the external disturbance. 12 revisable frequency points for user.

After reset or revised the frequency points in the remote, receivers only can be used after relearn the ID. Attn:

Feature:

Check the Frequency Point on the Remote:

Edit the Frequency Point on the Remote: In frequency changing state

Method 1: short press any key from 1-8 and key, the frequency point will be 1-9 correspondingly( represent 9),

the green light will flash in the same numbers. Press again any key or touch the color circle to exit the

frequency edit state.

7. Wiring Diagram:

10. Warranty Agreement:

9. Attention:

1. The product shall be installed and serviced by a qualified person.

7. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.

6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.

5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current.

Please also ensure that the cable is secured tightly in the connector.

4. Please check if the output voltage of any LED power supplies used comply with the working voltage of the product.

3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.

2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure it is

mounted in a water proof enclosure.

1. We provide lifelong technical assistance with this product:

★This manual only applies to this model. Dinam reserves the right to make changes without prior notice.

4. Any amendment or adjustment to this warranty must be approved in writing by Dinam only.

3. Repair or replacement as provided under this warranty is the exclusive remedy to the customer. Dinam shall

not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.

2. Warranty exclusions below:

For faults beyond the 5-year warranty we reserve the right to charge for time and parts.

A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement and

covers manufacturing faults only.

Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.

The product appears to have excessive physical damage.

Damage due to natural disasters and force majeure.

Warranty label, fragile label and unique barcode label have been damaged.

The product has been replaced by a brand new product.

……

350mA 700mA 1050mA

T3-CV

121

CV receiver

DC5V-24V

T3-CV

121

CV receiver

DC5V-24V

T3-CV

121

CV receiver

DC5V-24V DC12V-48V

T3-CC

CC receiver

DC12V-48V

T3-CC

CC receiver

DC12V-48V

T3-CC

CC receiver

White/Warm White LED Strip

LED

Panel Light

LED

Panel Light

Round LED

Panel Light

8. The Charging Methods for Remote Control:

1. When charging, please connect USB cable to the mobile charger or computer with the USB interface.

5. The remote should be full charged and stored under low cold drying while a long time without being operated.

And please full recharge every 3 months.

4. Red indicator light flickers meaning low battery and need to be charged. Charging in low battery will affect life

of battery.

3. No memory effect in the lithium battery of remote control. Follow the standard charging procedure even for the

first three times, no need over charge.

2. The blue indicator light flickers while charging, and turns green means the charging is completed. The remote

control can be chargeable even at the OFF state, on which the indicator light is black.

Ce manuel convient aux modèles suivants

Manuels Régulateurs de température populaires d'autres marques

Swegon

Swegon LUNAd MB Manuel utilisateur

Lucky Reptile

Lucky Reptile Thermo Control II Manuel utilisateur

SENSORMETRIX

SENSORMETRIX Argon 100 Manuel utilisateur

Fuji Electric

Fuji Electric PXE4 Manuel utilisateur

Yuyao gongyi

Yuyao gongyi XMT-808 series Manuel utilisateur

Selec

Selec TC544C Manuel utilisateur

P.W. KEY

P.W. KEY rt-208gt Manuel utilisateur

Future Design

Future Design FDC-9200 Manuel utilisateur

BH Thermal

BH Thermal BriskONE Manuel utilisateur

Omron

Omron E5EX-H Manuel utilisateur

West Control Solutions

West Control Solutions KS 45 Guide de démarrage rapide

MCS

MCS RITC-15B Manuel utilisateur

SMC Networks

SMC Networks Thermo-con INR-244-639 Manuel utilisateur

eltherm

eltherm Ex-TC It Series Manuel utilisateur

Omron

Omron C200H-TV Series Manuel utilisateur

industrie technik

industrie technik CA1 Manuel utilisateur

KRAL

KRAL EET 32 Manuel utilisateur

dixell

dixell XR420C Schéma de câblage