Dimplex DFG3033 Manuel utilisateur

Owner’s Manual

Model

DFG3033

To view the full line of Dimplex products, please visit

www.dimplex.com

7210600100rev01

IMPORTANT SAFETY INFORMATION: 



comply with all warnings and safety instructions contained in this manual

to prevent personal injury or property damage.

2 www.dimplex.com

Welcome & Congratulations ........................3

Important Instructions .............................4

Quick Reference Guide ............................6

Site Selection and Preparation ......................6

Fireplace Installation ..............................7

Operation ......................................10

Maintenance ...................................16

Warranty ......................................19

Replacement Parts List ...........................23

Table of Contents



or service agency to repair



!NOTE: Procedures and

techniques that are

considered important

enough to emphasize.

CAUTION: Procedures and

techniques which, if not

carefully followed, will result

in damage to the equipment.

WARNING: Procedures

and techniques which, if not

carefully followed, will expose



serious injury, or death.

Welcome & Congratulations

Thank you and congratulations for

choosing to purchase an electric





Please carefully read and save

these instructions.

CAUTION: Read all

instructions and warnings

carefully before starting

installation. Failure to follow

these instructions may result

in a possible electric shock,

 

the warranty.

Please record your model and

serial numbers below for future

reference: model and serial

numbers can be found on the

Model and Serial Number Label



NO NEED TO RETURN

TO THE STORE

Questions With the Assembly?

Require Parts Information?

Product Under Manufacturer’s

Warranty?

Call Toll-Free

1-888-346-7539

Monday to Friday

8:00 a.m. to 4:30 p.m. EST

Please have your model

number and product serial

number ready. (See below)

Model Number

Serial Number

4 www.dimplex.com

①Read all instructions before



②The heater is hot when in use.

To avoid burns, do not let bare

skin touch hot surfaces. The

trim around the heater outlet

becomes hot during heater

operation. Keep combustible

materials, such as furniture,

pillows, bedding, papers, clothes,

and curtains at least three (3) feet

(0.9 m) from the front of the unit.

③Extreme caution is necessary

when any heater is used by or

near children or invalids and

whenever the unit is left operating

and unattended.

④Always unplug the electric



⑤Do not operate any unit with

a damaged cord or plug, or if

the heater has malfunctioned,



been dropped or damaged in

any manner. Return heater

to authorized service facility

for examination, electrical or

mechanical adjustment, or repair.

⑥Do not use outdoors.

⑦ 

IMPORTANT INSTRUCTIONS

intended for use in bathrooms,

laundry areas and similar indoor

locations. Never locate heater

where it may fall into a bathtub or

other water container.

⑧Do not run the cord under

carpeting. Do not cover cord with

throw rugs, runners, or the like.



area and where it will not be

tripped over.

⑨To disconnect the unit, turn

the controls off, then remove the

plug from the outlet.

⑩Do not insert or allow foreign

objects to enter any ventilation

or exhaust opening as this may



damage to the heater.

⑪ 

not block air intake or exhaust

in any manner. Do not use on

soft surfaces, like a bed, where

openings may become blocked.

⑫All electrical heaters have

hot and arcing or sparking parts

inside. Do not use in areas where



liquids are used or stored or

where the unit will be exposed to



SAVE THESE INSTRUCTIONS

⑬Do not modify the electric



in this manual. Any other use not

recommended by the



electric shock or injury to persons.

⑭Avoid the use of an extension

cord or power bar. Extension

cords and power bars may



If you must use an extension cord

or power bar, it must be No. 14

AWG minimum size and rated for

no less than 1875 Watts.

⑮ Do not burn wood or other



⑯ 

glass.

⑰ 

electrician should new circuits or

outlets be required.

⑱Always use properly

grounded, fused and polarized

outlets.

⑲Disconnect all power supply

before performing any cleaning,

maintenance or relocation of the

unit.

⑳When transporting or storing

the unit and cord, keep in a

dry place, free from excessive

vibration and store so as to avoid

damage.

IMPORTANT INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN



6 www.dimplex.com

Quick Reference Guide

① 



 

unit on?

 



the instructions for replacing the

light bulbs under the Maintenance

section of this manual.)

② 

may emit a slight, harmless odor



normal condition caused by the

initial heating of internal heater

parts and will not occur again.

③The information regarding the



found on the rating plate located

on the top of the unit.

!NOTE: This equipment has been tested and found to comply with the limits for Class



provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and the receiver.

· Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

 

Operation is subject to the following two conditions: (1) this device may not cause

interference and (2) this device must accept any interference, including interference that

may cause undesired operation of the device.

Site Selection and Preparation

!NOTE 1: 

circuit is required. A dedicated

circuit is preferred but not

essential in all cases. A

dedicated circuit will be

required if, after installation,

the circuit breaker trips or fuse

blows on a regular basis when

the heater is operating.

Additional appliances on the

same circuit may exceed the

current rating of the circuit

breaker.

WARNING: Ensure the power

cord is not installed so that it

is pinched or against a sharp

edge and ensure that the

power cord is stored or

secured to avoid tripping or

snagging to reduce the risk

 

to persons.

Construction and electrical

outlet wiring must comply with

local building codes and other

applicable regulations to

 

shock and injury to persons.

Do not attempt to wire your

own new outlets or circuits. To

 

shock or injury to persons,

always use a licensed

electrician.

This section provides instructions

for selecting a location and

preparing the site to install the



surround.

①Select a suitable location that

is not susceptible to moisture and

is away from drapes, furniture and



②For ease of electrical hook

up you may wish to locate the



(refer to NOTE 1).

③ 

dry and dust free location.

!NOTE: The dimensions of









does not require any additional

venting.

8 www.dimplex.com

Fireplace Installation

① 

into the mantel (refer to mantel

assembly instructions).

!NOTE 1: 

circuit is required. A dedicated

circuit is preferred but not

essential in all cases. A

dedicated circuit will be

required if, after installation,

the circuit breaker trips or fuse

blows on a regular basis when

the heater is operating.

Additional appliances on the

same circuit may exceed the

current rating of the circuit

breaker.

!IMPORTANT: If not using a

 

must be installed in an

enclosure with the following

minimum internal/opening

dimensions (Figure 1).

New Wall Construction

①Select a suitable location that

is not susceptible to moisture and

is away from drapes, furniture and



② 

desired location to see how it will

look in the room.

③Mark the desired location on



a safe, dry and dust free location.

④ 

opening of 31 ¾ inches (807 mm)

wide x 22 ¾ inches (578 mm)



Option #1

be lead from behind the trim and

along the wall to an outlet near



Option #2

installed inside the new frame

construction. Plug the unit into



cord does not reach, you may

use an extension cord rated for a

minimum of 1875 Watts.

Figure 1

22 ¾”

(578 mm)

31 ¾”

(807 mm)



(241 mm)

Fireplace Installation

Option #3

①Wire a dedicated, properly



15 Amp rating. Allow up to eight

(8) feet (2.4 m) of service cable

for connecting power supply to





CAUTION: 



cable with ground wire (three

(3) wires total) for the incoming





to meet local and national

electrical codes for rated

power consumption.

②Remove the outer jacket and

strip the individual conductor from

the end.

③Loosen the screw securing

the junction box cover and

remove the cover.

④Take the cables out from the

junction box, loosen the two wire

twist nuts and remove the cord

set (Figure 2).

⑤Route the power supply wire

through the knockout on supplied

alternative junction box cover

and secure with a wire clamp (not

supplied) (Figure 3).

⑥Connect the black wire (live)

from the unit to the black wire

from power supply (Figure 3).

Figure 2

Figure 3

10 www.dimplex.com

Fireplace Installation

⑦Connect the white wire

(neutral) from the unit to the white

wire from power supply

(Figure 3).

⑧Connect the green wire

(ground) from the unit to the

green wire from power supply

(Figure 3).

⑨Place all connectors inside

the unit and secure the junction

box cover to unit. Ensure that the

cable clamp grips only the jacket

of service cable.

CAUTION: Clearance for

air circulation beneath the



two (2) rubber feet.

Do not install the replace

insert directly on carpet or

similar surfaces which may

restrict air circulation.

 







that both of the insert’s feet

rest securely on this surface.

Final Steps

Carefully pour and evenly

distribute the supplied glass rock

media on the front tray of the



hang the front glass assembly on



Fireplace

Junction



White wire (N)



Green wire (G) Green wire (G)



White wire (N)



Supply



Figure 4

Front glass

Mounts

Hooks

Autres manuels pour DFG3033

Table des matières

Autres manuels Dimplex Cheminée intérieure

Dimplex

Dimplex DF2608 Manuel utilisateur

Dimplex

Dimplex SP820 Manuel utilisateur

Dimplex

Dimplex CAS20N-AU Manuel utilisateur

Dimplex

Dimplex DFI400R Manuel utilisateur

Dimplex

Dimplex Modini DEC20M Manuel utilisateur

Dimplex

Dimplex RWF-DG Manuel utilisateur

Dimplex

Dimplex CAS400 Manuel utilisateur

Dimplex

Dimplex EF3003 Manuel utilisateur

Dimplex

Dimplex 25 FIREBOX Manuel utilisateur

Dimplex

Dimplex DWF36 Manuel utilisateur

Dimplex

Dimplex Opti-myst Manuel utilisateur

Dimplex

Dimplex DWF3651 Manuel utilisateur

Dimplex

Dimplex BF392SD Manuel utilisateur

Dimplex

Dimplex DWF36-PG Manuel utilisateur

Dimplex

Dimplex Optimyst 3STEP-RGB-EU Mode d’emploi

Dimplex

Dimplex BF36E Manuel utilisateur

Dimplex

Dimplex MULTIFIRE DF3015 Manuel utilisateur

Dimplex

Dimplex SP120SP220 Manuel utilisateur

Dimplex

Dimplex Rectory REC20R Manuel utilisateur

Dimplex

Dimplex IN-STUD V1525BT Manuel utilisateur

Dimplex

Dimplex Americana AMR20R Manuel utilisateur

Dimplex

Dimplex ENG56-400 Manuel technique

Dimplex

Dimplex DF3033ST Manuel utilisateur

Dimplex

Dimplex Cadogan CGN20 Manuel utilisateur

Manuels Cheminée intérieure populaires d'autres marques

Brigantia

Brigantia 35-DVRS31N-2 Manuel du propriétaire

Nordpeis

Nordpeis Bergen Manuel utilisateur

Superior

Superior BCT2536TMN Manuel utilisateur

Quadra-Fire

Quadra-Fire 5100I-GD-B Manuel utilisateur

Renaissance

Renaissance RUMFORD 1000 Manuel utilisateur

Lacunza

Lacunza IV-800 Manuel utilisateur

Baxi

Baxi 940 Instructions d'utilisation

Dru

Dru Maestro 60/2 Tall RCH Manuel utilisateur

Diamond Fireglass

Diamond Fireglass SS-O22 Manuel utilisateur

HearthStone

HearthStone Windsor Bay 8830 Manuel de programmation

Napoleon

Napoleon ASCENT B42 Manuel utilisateur

Enviro

Enviro E33GI Manuel utilisateur

Smeg

Smeg L30 FABE Instructions de montage

KEDDY

KEDDY K700 Manuel utilisateur

Godin

Godin 3451 Manuel utilisateur

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manuel utilisateur

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manuel utilisateur

Desa

Desa CCFPDFT Manuel d'utilisation