Dimplex DESC2TN Manuel utilisateur

WARNING: Do not use this heater in the

immediate surroundings of a bath, a shower or

a swimming pool.

WARNING: In order to avoid a hazard due to

inadvertent resetting of the thermal cut-out,

this appliance must not be supplied through an

external switching device, such as a timer, or

connected to a circuit that is regularly switched

on and off by the utility.

IMPORTANT: Avoid use of an extension cord

because the extension cord may overheat

and cause risk of re.

CAUTION: Some parts of this product can

become very hot and cause burns. Particular

attention has to be given where children and

vulnerable people are present.

WARNING: Do not use the heater in small rooms

when they are occupied by persons who are not

capable of leaving the room on their own, unless

constant supervision is provided.

WARNING: To reduce the risk of fire, keep

textiles, curtains or any other ammable material

a minimum distance of 1m from the air outlet.

IMPORTANT: If the mains lead is damaged,

it must be replaced by the manufacturer or its

service agent or a similarly qualied person in

order to avoid a hazard.

Important Safety Advice

WARNING: To avoid danger of suffocation please

remove all packaging materials particularily

plastic and EPS and keep these away from

vulnerable people, children and babies.

IMPORTANT: The heater should only be used

on a horizontal and stable surface with the feet

securely tted.

This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

Children should be supervised to ensure that they

do not play with the appliance.

DO NOT route cord under furniture or appliances.

Take care to position the cord away from trafc

areas and where it will not be a tripping hazard.

WARNING: To avoid the risk of accidental

strangulation from the supply cord all children

and vulnerable people must be supervised when

in the vicinity of the product whether it is working

or not.

WARNING: This heater must not be located

immediately below a xed socket outlet.

The heater carries a warning symbol to

alert the user to the risk of re that exists

if the heater is accidentally covered.

WARNING: In order to avoid overheating do not

cover the heater.

WARNING: This appliance must not be used in

a bathroom.

DO NOT use the heater if it has been dropped.

DO NOT use the heater if there are any visible

signs of damage.

Dimensions

(Millimetres)

Installation and Operating Instructions

Dimplex Convector Heaters

Models : DESC2TN, 402TSF

08/54552/0 Issue 0

Models Specication

DESC2TN 2.0kw Thermostat,

402TSF 2.0kw Thermostat & 2 heat settings, Turbo & Neon.

IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

Fig. 1

Electrical Connection

WARNING – THIS APPLIANCE MUST BE

EARTHED

This heater must be used on an A.C. ~ supply

only and the voltage marked on the heater must

correspond to the supply voltage.

The use of an extension lead or multi-plug adaptor

is not advised when connecting this product to the

mains. Connection through these devices could lead

to a risk of overloading, overheating and even re

at the extension lead or adaptor due to inadequate

connection quality.

Using the heater

WARNING: DO NOT USE THE HEATER UNTIL

THE FEET ARE FITTED CORRECTLY.

The product can be used as an installed or portable

unit. Once the desired application has been decided

upon and the requirements below have been met

the product is ready to be used. Simply plug in and

switch on at the wall socket.

Please note – the element has been coated with a

protective lm which will burn off during the rst few

minutes of use and may cause a small amount of

fuming. This is quite normal – the fumes are non-

toxic and will quickly disappear.

We recommend that you open a window to ventilate

the room when using the heater for the rst time.

Positioning the heater

Always ensure that the heater is stood on a rm,

level base near to, but not directly beneath, a suitable

mains supply socket.

Ensure that curtains and furniture are not positioned

close to the chosen position, as this would create a

potential re hazard.

WARNING: THE HEATER SHOULD NEVER BE

USED AS A PORTABLE APPLIANCE WITHOUT

THE FEET SECURELY FITTED.

Lay the heater on its back, locate and remove the

foot xing screw - see Fig. 2(a). Clip the foot in place

and secure using the foot xing screw - see Fig. 2(b).

Controls

NOTE: When using the appliance or setting

appliance controls always ensure that the

heaterisstoodonarmlevelbase.Donottilt

the appliance at any time.

Indicator Neon (selected models)

The indicator neon comes on when the appliance is

connected to mains supply.

Thermostat (all models)

The thermostat controls the heat output according to

the room temperature. This ensures that the heater

will not produce heat unnecessarily when the room

is warm.

To set the temperature you require, Gradually turn

the thermostat knob clockwise until the desired

temperature is reached. Allow some time between

increments for the room temperature to stabilise.

Alternatively to heat a cold room quickly, turn the

thermostat knob to the Max position. When the

room has reached the desired temperature, turn the

thermostat knob anti-clockwise until the thermostat

clicks off. The heater will then automatically maintain

this room temperature.

The thermostat also has a frost protection setting

marked ‘ ’. This setting is useful in areas such as

garages to prevent frost damage. If the thermostat is

set to its minimum setting ‘ ’, the heater will cycle ON

and OFF to maintain a temperature of approximately

5°C to help protect against frosty conditions.

Switches (selected models)

Selected models are supplied with selector switches

. There are two switch types, one is an on/off switch

and the other is a heat selection switch. Depending

on model either one or both switch may be included.

The switch operation is as follows.

On/Off: O- Off

I- On

Heat selection I- Low heat

II - High heat

Fig. 3

Fig. 2

DESC2TN

Turbo fan(selected models)

The turbo fan is used

to boost the airflow

around the room. This

circulates the heat

better and results in a

reduced heat up time

and a more even heat

distribution. The turbo

fan is controlled by the

neon switch on the front

of the product.

The turbo can be turned

on independently of the

heat, however the fan

will switch on and off

under the control of the

thermostat.

Note: On selected models in warm weather the fan

can be used to circulate cool air. Once the heat

selection switches are in the off position and the

thermostat is set to ‘Max’ the fan will continue to

function to circulate cool air.

Safety – overheat protection

For your safety, this appliance is tted with a thermal

cut-out. In the event that the product overheats, the

cut-out switches the heater off automatically.

To bring the heater back into operation, remove the

cause of the overheating, then unplug or turn off

the electrical supply to the heater for a few minutes.

When the heater has cooled sufciently, re-connect

and switch on the heater.

Important Notes

Although this heater is manufactured to comply with

the relevant safety standards, certain types of carpets

could become discoloured by the temperatures

under a portable heater. If you are concerned about

this, we recommend that you contact the carpet

manufacturer for guidance. Alternatively, stand the

heater on a suitable base to shield the carpet or

wall-mount it – call our Helpline for further advice.

You may notice some parts of the element appearing

to be hotter from time to time because of the variable

airow through the heater. This does not cause a

safety hazard.

The heat outlet grille may become discoloured with

use – this is caused by airborne pollution and is not

a fault.

Recycling

Do not dispose of electrical appliances as

unsorted municipal waste. Use separate

collection facilities. Contact your local

government for information regarding the

collection systems available. If electrical

appliances are disposed of in landlls or dumps,

hazardous substances can leak into the ground

water, polluting the food chain and damaging health

and well-being.

Cleaning

WARNING – ALWAYS DISCONNECT FROM

THE POWER SUPPLY BEFORE CLEANING

THE HEATER.

Before commencing cleaning, switch off the heater

and allow it to cool. Disconnect the electricity

supply to the appliance.

The outside can be cleaned by wiping it over

with a soft damp cloth and then dried. Do not use

abrasive cleaning powders or furniture polish, as

this can damage the surface nish.

After Sales Service

Please refer to the warranty card in the box for

warranty information. For any troubleshooting advice,

please contact the relative Customer Care Centre

below.

Glen Dimplex Australia Pty Ltd

1340 Ferntree Gully Road,

Scoresby 3179, Victoria

Australia

Ph: 1300 556 816

Glen Dimplex New Zealand Ltd

38 Harris Road, East Tamaki,

Auckland 2013

New Zealand

Ph: 0800 666 2824

Fig. 4

permission in writing of Glen Dimplex Australia.

Ce manuel convient aux modèles suivants

Autres manuels Dimplex Chauffage

Dimplex

Dimplex DXFF30TSN Manuel utilisateur

Dimplex

Dimplex LST100 Manuel utilisateur

Dimplex

Dimplex DTR 350 C Manuel utilisateur

Dimplex

Dimplex DXGLO2 Manuel utilisateur

Dimplex

Dimplex OFRC20 Manuel utilisateur

Dimplex

Dimplex HAW1000N Manuel utilisateur

Dimplex

Dimplex DX 422 T Manuel utilisateur

Dimplex

Dimplex Studio 842 Manuel utilisateur

Dimplex

Dimplex RCE 050 Manuel utilisateur

Dimplex

Dimplex DCU18LCD Manuel utilisateur

Dimplex

Dimplex RPX075N Manuel utilisateur

Dimplex

Dimplex DX 421 Manuel utilisateur

Dimplex

Dimplex PLX050E Manuel utilisateur

Dimplex

Dimplex XT Manuel utilisateur

Dimplex

Dimplex CXD2000H-NA Series Manuel utilisateur

Dimplex

Dimplex AF12 Series Manuel utilisateur

Dimplex

Dimplex OFRC10 Manuel utilisateur

Dimplex

Dimplex Q-Rad Series Manuel utilisateur

Dimplex

Dimplex PCH2000TCW-TK Manuel utilisateur

Dimplex

Dimplex IRM 320W Manuel utilisateur

Dimplex

Dimplex 402BT Manuel utilisateur

Dimplex

Dimplex FX 20E IPX4 Manuel utilisateur

Dimplex

Dimplex WFC 3NB Manuel utilisateur

Dimplex

Dimplex FX 20 IPX4 Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur