4
About Your Standing
Warning
USE A WALL OUTLET CONNECTED TO A
CIRCUIT BREAKER, OR MAKE SURE THAT
THE APPLIANCE IS ADEQUATELY
GROUNDED.
●
Connect your appliance to a wall outlet connected
to a circuit breaker or with a ground terminal.
●
Alternatively, purchase a grounding wire, connect
with a grounding terminal on the wall socket or
a copper plate, and bury it in the ground.
●
Grounding to a gas pipe, a plastic water pipe or a
telephone cable is not permitted under any
circumstances.
DO NOT INSERT THE METAL STICK OR
YOUR HANDS INTO THE MACHINE ROOM
COVER ON THE TOP OR INTO THE BOTTOM
AREA UNDER THE APPLIANCE.
●
This may cause electrical shock or injury.
WHEN YOU INSTALL THE APPLIANCE,
ADJUST THE LEVEL WITH THE
HEIGHT-ADJUSTING SCREWS SO THAT
IT DOES NOT FALL FORWARD.
●
If you install the appliance on a at oor, it will be
installed with the front side approximately 10 mm
higher than the rear side.
●
If you install the appliance on an uneven oor,
it may lean toward the front. In this case, adjust the
front side to be higher than the rear side using the
height-adjusting screws.
