diLUSSO TH919DSL Manuel utilisateur
TELESCOPIC HOOD
INSTALLATION INSTRUCTIONS
TH919DSL
To avoid the risk of accident or damage to the
appliance, it is
essential
to read the following
instruction prior to product installation and / or
first time usage
USER MANUAL
TH619DSL
TH633DSL
TH933DSL
Table of Contents
·Important Notes -------------------------------------------- 3
·Specifications ----------------------------------------------- 5
·Vent System Requirements ----------------------------- 5
·Ducted & Re-circulating Mode --------------------------6
·Description of Parts ----------------------------------------8
·Instruction for Use ----------------------------------------- 10
·Technical Information ------------------------------------- 11
·Installation ----------------------------------------------------12
·Cleaning & Maintenance --------------------------------- 13
·Troubleshooting -------------------------------------------- 15
2
Important Notes
Dear Customer
Thank you for choosing our product. This appliance is easy to use; however
please read this handbook carefully before installing and operating it. Here-
in, you will find the correct method of installation and tips for best use and
maintenance of the product.
·This appliance is designed to be handy for any adult to use at home. Do
not allow children to play with it. Children need to be supervised when
the product is in operation so that they do not go near the rangehood.
·This product must be connected in accordance with current electrical
regulations. A fixed wiring installation is to be done only by an
authorised electrician.
·Warning! This Appliance Must Be Earthed.
·Means for disconnection must be incorporated in the fixed wiring in ac-
cordance with the wiring rules.
·Electrical Connection :
Green & Yellow : Earth
Blue : Neutral
Brown : Live
·Fixed wiring must be protected.
·Never use reductions, shunts, adaptors that can cause overheating or
burning.
·It is strictly prohibited to modify any part of this appliance. Modification
is to be done at user own risk.
·Before maintenance or cleaning of the product, disconnect the
appliance from the mains.
3
·For any repairs, always contact authorised Customer Service Centre and
ask for original spare parts. Repairs by untrained people may lead to
damage and void of warranty.
·Packaging cling film, polystyrene and plastic wrappings must be kept out
of reach of babies and young children to avoid suffocation.
·Do not connect the appliance if there are obvious signs of transportation
damage. If the supply cord is damage, it must be replaced by the
manufacturer, or its service agent.
·Ensure the location in which this appliance is installed has good,
permanent ventilation.
·The distance between the benchtop to the lower part of the hood must
not be less than 70cm and it is not recommended to be more than 75cm
for optimal operation.
·Do not leave lit gas burners exposed due to risk of fire.
·The exhaust from the rangehood must not be discharged into any
heating flue.
·This product must not be disposed with the domestic waste. It has to be
disposed at an authorised bin for recycling the appliances.
·This appliance is not intended for use by person (including children) with
reduced physical, sensory or mental capabilities or lack of experience
and knowledge. Unless, they have been given supervision or instruction
regarding the use of appliance by personnel who is responsible for their
safety.
·There is risk of catching fire if cleaning is not carried out in accordance
with the frequency suggested and instructions.
The manufacturer shall not be liable for any direct or indirect damage caused
by faulty installation. The installer must ensure that the product installation and
connection complies with the local and general regulation in force.
4
Specifications
TH619DSL TH919DSL TH633DSL TH933DSL
Input : 220-240V~ 220-240V~ 220-240V~ 220-240V~
/ 50-60 Hz / 50-60 Hz / 50-60 Hz / 50-60 Hz
Absorption : 130W 130W 260W 260W
Lamps : 2 x 2W 2 x 2W 2 x 2W 2 x 2W
Total Power : 134W 134W 264W 264W
Vent System Requirements
Vented system must be terminated to the outside. Ductwork can extend either through
the wall or the roof. Do not terminate the vent system in an attic or other enclosed ar-
ea.
The length of the ductwork and the number of elbows should be kept to minimum to
provide efficient performance. The size of the ductwork should be uniform. Do not
install two elbows together. Use duct tape to seal all joints in the ductwork system. Use
caulking to seal exterior wall or floor opening around the cap.
Flexible ductwork is not recommended. Flexible ductwork creates back pressure
and air turbulence that greatly reduces performance.
Make sure there is proper clearance within the wall or floor for exhaust duct before
making cutouts. Do not cut a joist or stud unless absolutely necessary. If a joist or stud
must be cut, then a supporting frame have to be constructed.
5
Ducted Vs Re-Circulating Mode
Your cooker hood is configured to be operated in the ducted or recirculating
mode (depending on model).
Ducted Mode (Vented Mode)
Cooking fumes are vented outdoors through suitable
connection of 150mm diameter. In this mode, only
the aluminum filters are installed.
IMPORTANT!
Recirculation holes must be covered with a plate provided in ducted mode.
6
Recirculation holes
cover
Re-circulating Mode (Depending on models)
Fumes are filtered for grease and odours through the aluminium grease filters
and the charcoal filters respectively and re-introduced into the kitchen
environment. In re-circulating mode, both aluminium grease filters and the
charcoal filters must be installed.
IMPORTANT!
Recirculation holes cover must be removed.
Hood outlet must be covered with a plate provided.
7
Hood outlet cover
Charcoal filter
Description of Parts
8
9
No Quantity Part
1 1 Rangehood body with integrated motor, controls &
light
2 2 Flaps
3 1 Outlet adaptor
4 1 Outlet cover
5 1 Recirculation holes cover
6 2 Charcoal filter (Optional)
7 2 Aluminium filter
8 1 User manual
9a 4Mounting screws M5*40
9b 4Mounting gasket
Instructions for Use
By pressing the button shown below, you will be able to control the functions
of the extractor.
To achieve better extraction, we recommend to switch on the extractor a few
minutes before starting to cook (3—5 minutes) so that the air flow is
continuous and stable when extracting fumes.
Likewise, keep the extractor switched on for a few minutes when cooking is
complete to allow all fumes and odors to be expelled.
10
Speed
Light
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels diLUSSO hotte de ventilation
