Digoo DG-ZXC24 Manuel utilisateur
User Manual
P/T IP Camera
English
Quick Guide
P/T IP Camera
10-20cm
Getting to Know Your Camera
What`s in the BOX
Anchors USB Line X 1
Power
Reset
SDCardSlot
LightSensor
Lens
Download “YCC365 PLUS” app and install it on your
The distance between the camera and code is about 10-20cm.
Try another possision if it can't be recognized within 5 seconds.
After adding successfully, please rename your device and done.
Select “Sign Up" to register a new account with Email.
Password should be between 6 to 30 characters.
Please turn on GPS service for first time use.
Please put the camera besides the router for first time pairing.
Make sure your phone has connected the router.
Select “+" on the upper right corner, then choose “camera"
Select “Adding by scaning the code"
Follow the instructions go on next step.
smartphone. To find our app, use the following QR codes, or
search for it directly.
APP Download & USED
How to Connect (Scan QR Code)
Register an Account
Add Camera
Website: www.ucloudcam.com
Login with your account and password, then you can watch the video
online via browser
View Via Browser
NOTICE:
For more details please go to website “www.mydigoo.com” to
download FULL User Manual PDF version.
User Manual
English
1.Main Function Description
Cloud Storage HD Recording Remote Switch
Audible Alarm Schedule Recording IOS Support
Android Support Two-way Audio Remote Monitor
Wireless WIFI Video Streaming TF Card Storage
1) Search and download “YCC365 Plus” in Apple Store
or Android app store.
2) Scan the QR code as below
2.How To Download Mobile APP
Infrared Night Vision Pan & Tilt Motion Detection
3.1 Register an account
Tips: the current version only supports mobile phone
number registration in Vietnam. Please use email to
register in other areas
When you use this app at the first time, you need to use
your email to register an account, click “Sign Up” and set
a password according this procedure.
*If you forget your password, you can reset your
password, just click "Forgot password” on the login page.
*Password should be at least 6 characters and not longer
than 30 characters. It should be a combination of letters
and numbers.
3.How To Operate The Mobile APP
3.2 Add Camera
Note: the camera only supports 2.4G WIFI, before adding
devices, make sure your router is 2.4G WIFI, and your
phone is connected to 2.4G WIFI.
1) Please make your phone connect to the Wi-Fi, and
then click “Device adding by scanning the code”, reset the
camera, after hearing the voice “Please configure camera
by scanning code or AP hotspot”, please click the
“Connect to the network”.
2) Select your own Wi-Fi and login with your password.
3) Align the two-dimensional code displayed on the phone
with the camera lens, maintain a distance of 4-8 inches
and keep balance.
4) Click “I heard the beep voice” after hearing the beep,
a few seconds later, you will hear the voice “Internet-
connected welcome to use cloud camera”.
3.2.1、Scan QR code to add
1 2 3
1) Please connect Ethernet cable between camera and
Wi-Fi router.
2) After your phone connect to the Wi-Fi, Click “Add
device” and “Addition by connecting to network cable”
3) Please scan the QR code on the device and wait for
the network connection to succeed.
3.2.2 Addition by connecting to network cable (Only support
Lan port device)
4 5 6
1) After your phone connect to a Wi-Fi , please click “Add
device” and “Addition of AP hotspot”,, after hearing the
voice “Please configure camera by scanning code or AP
hotspot”, please click the “Connect to the network”.if you
do not hear the voice,please reset you camera.
2) Follow the wizard make your phone connect to
“CLOUDCAM_XXXX” network and Return to YCC365
plus app.
3) Click “Next ” and Select your own Wi-Fi and login with
your password.
4) Wait for the Wi-Fi connection to succeed then Hear
the voice “Internet connected welcome to use cloud
camera”.
3.2.3 Addition of AP hotspot
1 2 3
4 5 6
3.3 AP Direct mode (special)
1) Power up the camera and hear the voice "Please
configure camera by scanning code or AP hotspot" (if
you don't hear the voice, reset the camera.
2) Open the YCC365 plus app to enter the login interface,
click “Local login”.
3) Make your phone connect to “CLOUDCAM_XXXX”
network ”.
4) Click “AP networked device preview” and Click “Next”.
5) Scanning the device in the Wi-Fi network, then click
the device.
6) Enter user name: admin password: 12345, click
“CONFIRM”, then you can preview the screen.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Digoo Appareil photo numérique
