
Copyright 2007 RTcom USA., Inc. 9
he functions of the switches are as follow.
Matrix power on/off
he matrix
el
tus of current connection
NT) key: save current selection
ection
peration by Push button
nels are displayed in sequence
to be set # →Output button (Multiple selection) set ## →Enter (ENT)
* if u w
Ex utput same pictures
Cre
Sa
on
DID (EDI h is connected with display) →Input #button to be
set(one o play and save them to matrix.
or, DVI monitor) of which power should be on
**If yo
Swit
Create ->IN Enter
3-2 Product number setting
- Produ
sed.
FF, 4 OF
FF, 4 ON, 5 OFF, 6 OFF, 7 OFF, 8 OFF,
od 5 ON, 6 OFF, 7 OFF, 8 OFF
T
•Main power switch:
•Remote controller receiver: receive infrared ray from remote controller
•Reset key: initialize t
•Input key: select channel from 1 to 6
•Output key: select channel from 1 to 6
•Create (CRE) key: change input/output chann
•Preview (PRE) key: preview the sta
•Enter (E
•Cancel (CAN) key: cancel current sel
•EDID (EDI) key: read EDID data from display then save data to matrix, which is connected to output
ports
O
Input/output channel check:
Preview (PRE) button →Input # button: present set chan
Input/output channel change
Create (CRE) button →Input button
but n: thto e selection of the channels are changed
cancel button.yo ant to cancel, then press
: CH# 1 input to 1,2,3,4 oample
ate -> Input 1 -> Output 1,2,3,4 -> Enter
ve EDID data
nect HS-66M matrix with display directly.
C
E) button →Select one of output # button(whic
r multiple) →Enter (ENT): Read EDID data of dis
Matrix output should be connected to display (project
u use DVI display should be save the EDID data to matrix first.
ching Channel by Remote Control unit
->># (ex:1) -> OUT ->#(ex:1,2,3,4)-
ct ID setting (DIP switch)
•It sets address for each matrixes if many matrixes are u
•It sets in binary values.
Ex)
Product ID = 01 (00000001b) -- 1 ON, 2 OFF, 3 O
1 OFF, 2 ON, 3 O
F, 5 OFF, 6 OFF, 7 OFF, 8 OFF,
Product ID = 10 (00001010b) --
Pr uct ID = 23 (00010111b) -- 1 ON, 2 ON, 3 ON, 4 OFF,
D0 D1 D2 D3 D4 D5 D6 D7
LSB MSB
•The product number is the value set in deep switches of the equipment and can be set in the values of 1 ~ 255. The value “0”