Digital Equipment Prioris MX 6200 Manuel utilisateur

Prioris™MX 6200 Server

PowerGrade with Pentium®Pro Chip

Upgrade

Installation Guide

Order Number: ER−PCB4U−IA. A01

Digital Equipment Corporation

April 1997

The information in this document is subject to change without notice and should not be construed as a

commitment by Digital Equipment Corporation.

Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in

subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-

7013.

FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. Any changes or modification made to this equipment may void the user’s

authority to operate this equipment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio and television reception; however,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one of the following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to a different outlet than the receiver.

• Consult the dealer or an experienced radio/TV technician for help.

DO NOT attempt to modify this equipment. If modified, the FCC may void your authority to operate this

equipment.

This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment

Regulations and meets all requirements of the Australian/New Zealand Regulation AS3548.

Prioris, DEC, ServerWORKS, and the DIGITAL logo are trademarks of Digital Equipment Corporation. Intel

and Pentium are registered trademarks of Intel Corporation. MS-DOS is a registered trademark of Microsoft

Corporation. All other trademarks and registered trademarks are the property of their respective holders.

 1997 Digital Equipment Corporation.

iii

Contents

Introduction 1

Kit Contents..................................................................................................... 1

Tools and Supplies Needed............................................................................... 1

Processor Compatibility in a Multiprocessor Environment................................ 2

Boot the Quick Launch CD-ROM and Create Diskettes 2

Enable the On-Board VGA Controller 3

Power Down the Server 3

Set Switches on the Main Logic Board ............................................................ 4

Replace the Panel and Reconnect the Cables .................................................... 5

Power Up the Server and Update Your BIOS 5

Powergrade Installation 6

Remove the CPU Module ................................................................................. 6

Install the CPU Chip ....................................................................................... 7

Install the Voltage Regulator Module(s) ........................................................ 11

Check the CPU Speed Settings....................................................................... 12

Reset the Switches on the Main Logic Board.................................................. 13

Install the CPU Module ................................................................................. 13

Install any Video Option Card ....................................................................... 13

Replace the Panel and Reconnect the Cables .................................................. 13

Run the System Configuration Utility (SCU) 15

Troubleshooting 16

Using the Crisis Recovery Diskette if Necessary ...............................................16

Bulletin Board Access .....................................................................................16

Figures

Figure 1 MX 6200 Main Logic Board Switch Location.................................... 4

Figure 2 Removing the MX 6200 CPU Module ............................................... 6

Figure 3 Removing the Clip from the Shipping Holder ................................... 7

Figure 4 Removing the New CPU from its Shipping Holder ........................... 8

Figure 5 Installing the New CPU Chip ........................................................... 9

Figure 6 Installing the Clip to Secure the CPU to the CPU Module ............... 10

Figure 7 Installing a Voltage Regulator Module ............................................ 11

Figure 8 CPU Module Switch Location.......................................................... 12

Figure 9 Installing a CPU Module in an MX 6200 Server.............................. 14

Tables

Table 1 Kit Contents ...................................................................................... 1

Table 2 CPU Module CPU Speed Switch Settings ......................................... 12

Conventions

Symbol Meaning

NOTE: Provides general information.

WARNING: Indicates the presence of a hazard that can cause

personal injury if the hazard is not avoided.

NOTE: You may lose data if you have not backed up your

system. If you do not wish to install this kit yourself, contact

Digital Customer Service. For a nominal fee, a Customer

Service Technician can install it for you.

PowerGrade Option Warranty

This document is a supplement to the warranty information and terms

provided with your Prioris Server.

PowerGrade Options Limited Warranty

PowerGrade option kits are qualified Digital Personal Computer Hardware Options that

are warranted to be free from defects in material and workmanship under normal use.

This Limited Warranty does not extend to any Product not purchased from Digital or

from an Authorized Digital Reseller. This Limited Warranty also does not extend to

any Product that has been damaged or rendered defective (a) by operation outside the

usage parameters stated in section four entitled Warranty Exclusions and Limitations of

Liability of the Digital Personal Computers Warranty and Service Information

document; (b) as a result of accident, misuse or abuse; (c) as a result of service or

installation by anyone other than Digital, an Authorized Digital Reseller, or an

Authorized Digital Service Provider, or (d) by the use of parts not manufactured or sold

by Digital.

Upon installation in the appropriate Prioris Server, the PowerGrade option will carry

the longer of either a one year Return-to-Digital warranty or the remainder of the

warranty period for the Digital Prioris Server.

Digital warrants that the PowerGrade option you have purchased from Digital, or from

an Authorized Digital Reseller, will function correctly when properly installed in the

appropriate Prioris server if the CPU contained within this kit is within one stepping

(version) of the CPU(s) that originally came with your Prioris Server.

Warranty Exclusions and Limitations of Liability

Installation of a PowerGrade option requires handling and installing a CPU chip, which

must be performed with extreme care to avoid product damage. Therefore, Digital

recommends that the installation of this option be performed by an Authorized Digital

Service Provider.

Please refer to the “Digital Personal Computers Warranty and Service

Information” document provided with your Digital Prioris Server for further

information.

Prioris MX 6200 Server PowerGrade

with Pentium®Pro Chip Upgrade

Introduction

Thank you for purchasing this PowerGrade kit. This kit contains all the

components and instructions required to upgrade your CPU configuration from

one to two 200 MHz Pentium®Pro processors with 256KB cache.

Installing this kit may involve updating your system BIOS (Basic Input-Output

System). To do this, you will need to remove any video option card, if installed,

and enable the internal VGA controller. Once the BIOS process has completed

successfully, you can then reinstall any video option card. You must install the

new BIOS before installing your Powergrade kit. This installation guide provides

the necessary details.

Kit Contents

Table 1. Kit Contents

Item

Pentium®Pro 200 MHz /256KB CPU assembly

Voltage regulator module

Antistatic wrist strap

ServerWORKS Quick Launch CD-ROM

Installation Guide

Tools and Supplies Needed

• Phillips screwdriver, 1 pt.

• Antistatic wrist strap with grounding clip (supplied)

• Three MS-DOS formatted diskettes

Prioris MX 6200 Server PowerGrade

Processor Compatibility in a Multiprocessor Environment

Intel and Digital recommend using identical steppings/versions of processors

within a multiprocessor system whenever possible, since these configurations have

received the greatest amount of validation testing. Since it is not possible to

validate every combination of processor steppings, each new stepping of a

processor is fully validated only against the latest stepping. At press time, there

were no known incompatibility issues about mixing CPU steppings in a

multiprocessor system. Please refer to the readme file on the ServerWORKS

Quick Launch CD-ROM to view the latest CPU Compatibility information. If you

have any concerns about processor compatibility within a multiprocessor system,

please contact your local Authorized Digital Reseller for assistance.

Boot the Quick Launch CD-ROM and Create Diskettes

During this procedure, you will create a crisis recovery diskette, BIOS upgrade

diskette, and a System Configuration Utility (SCU) diskette. The Quick Launch

CD-ROM contains the required BIOS, crisis recovery software, and SCU.

1. Power on your server and boot the ServerWORKS Quick Launch CD-ROM.

Note the version of your system BIOS displayed during the boot process.

2. Select the “Documentation” button, then view the Readme file for CPU

Compatibility issues.

3. From the Quick Launch Main Screen , select the “Installations & Utilities”

button and the Utility tab. Select MX6 is necessary.

4. Insert a DOS-formatted diskette into drive A, and choose “Crisis Recovery

Diskette,” and select Continue.

5. Insert the second diskette into drive A. From the available choices, choose

“BIOS Phlash Diskette,” and select Continue.

6. Insert the third diskette into drive A. Choose “System Configuration Utility

(SCU)” diskette and select Continue.

7. Select the BIOS version that you created in step 5 to create the appropriate

SCU diskette.

8. Select Exit to end Quick Launch and remove the CD-ROM.

Prioris MX 6200 Server PowerGrade

Enable the On-Board VGA Controller

If your system has an optional video controller, you will need to remove it and

enable the on-board VGA controller. If you are already using the on-board

controller, skip this procedure and go to “Power Down the Server.”

1. Insert the SCU diskette into drive A and turn on or reset your server. The

diskette should boot automatically.

2. When the SCU title appears, press any key to continue. Afterwards,

follow the instructions on your screen to access the SCU main menu.

3. From the main menu, use the arrow keys to highlight an item and then

press Enter to select it. Press F1 at any time for help about a selection.

4. Select the Advanced Control Group and enable the

Embedded - PCI VGA controller.

5. Select Save and Exit to save this selection.

Power Down the Server

1. Turn off your server.

2. Disconnect any external devices, the ac power cord, and the monitor

power cord.

3. Unlock the security lock on the server.

4. Remove the left side panel by sliding it toward the rear of the server.

5. If present, remove any Video Option Card.

WARNING: You might injure yourself or damage your server if you

attempt to remove the side panel before unplugging the ac and monitor

power cords.

Prioris MX 6200 Server PowerGrade

Set Switches on the Main Logic Board

Make sure that the following switches are set:

SW1-1 BIOS upgrade Enabled (On)

SW1-3 Boot block update Enabled (On)

DEC01052-6a

Figure 1. MX 6200 Main Logic Board Switch and Location

Table des matières

Autres manuels Digital Equipment Serveur

Digital Equipment

Digital Equipment MUXserver 100 Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 90L Manuel utilisateur

Digital Equipment

Digital Equipment PRIORIS ZX 6000 MP SERIES Manuel utilisateur

Digital Equipment

Digital Equipment 7100R Series Manuel utilisateur

Digital Equipment

Digital Equipment 7300 Manuel utilisateur

Digital Equipment

Digital Equipment VAX 4000 300 Manuel utilisateur

Digital Equipment

Digital Equipment PRIORIS XL Manuel utilisateur

Digital Equipment

Digital Equipment AlphaServer 4000 Manuel utilisateur

Digital Equipment

Digital Equipment 3300R Manuel utilisateur

Digital Equipment

Digital Equipment Prioris HX 6000 Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 700 Manuel de la liste des pièces

Digital Equipment

Digital Equipment MicroVAX 3600 Mode d’emploi

Digital Equipment

Digital Equipment DIGITAL Server 9100 Series Manuel utilisateur

Digital Equipment

Digital Equipment 5220 Series Manuel utilisateur

Digital Equipment

Digital Equipment AlphaServer 2000 Manuel utilisateur

Digital Equipment

Digital Equipment Unibus VAX-11/780 Manuel utilisateur

Digital Equipment

Digital Equipment PRIORIS ZX 5000 MP Manuel utilisateur

Digital Equipment

Digital Equipment PRIORIS MTE Manuel utilisateur

Digital Equipment

Digital Equipment DEC 4000 600 Series Instructions d'utilisation d'origine

Digital Equipment

Digital Equipment 7100R Series Manuel utilisateur

Digital Equipment

Digital Equipment PRIORIS ZX Manuel utilisateur

Digital Equipment

Digital Equipment DEC 10000 Manuel utilisateur

Digital Equipment

Digital Equipment DECmpp 12000/Sx 100 Manuel utilisateur

Digital Equipment

Digital Equipment Prioris HX590 DP Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur